Is there a driver available for the HAUWEI K3765 modem. This is a modem that Vodafone uses for Wireless broadband.
Puppy 4.3.1 can't see the modem.
Thanks.
Driver for the Huawei K3765 wireless modem (Solved)
Driver for the Huawei K3765 wireless modem (Solved)
Last edited by smokey01 on Tue 12 Jan 2010, 08:39, edited 1 time in total.
- gposil
- Posts: 1300
- Joined: Mon 06 Apr 2009, 10:00
- Location: Stanthorpe (The Granite Belt), QLD, Australia
- Contact:
Below is info from vodafone on that modem,
This may help...name = "Huawei K3765"
version = "0.1"
author = u"Andrew Bird"
custom = HuaweiCustomizer
__remote_name__ = "K3765"
__properties__ = {
'usb_device.vendor_id': [0x12d1],
'usb_device.product_id': [0x1451, 0x1465],
}
def preprobe_init(self, ports, info):
if info['usb_device.product_id'] == 0x1465:
self.hardcoded_ports = (0,4) # auto probing can hang
else: # let probing occur
pass
huaweik3765 = HuaweiK3765()
[img]http://gposil.netne.net/images/tlp80.gif[/img] [url=http://www.dpup.org][b]Dpup Home[/b][/url]
If you install Rerwin's 3G_pupdial-wireless & usbmodeswitch .pets, then run Pupdial->probe, is the device detected? (You may need to run Pupdial->probe->Erase also)
Thanks muggins I tried this and the modem is still not detected.muggins wrote:If you install Rerwin's 3G_pupdial-wireless & usbmodeswitch .pets, then run Pupdial->probe, is the device detected? (You may need to run Pupdial->probe->Erase also)
I also tried the erase without success.
I never had this much trouble getting the Huawei E169 to work. At least the E169 was detected from the start. The problem was finding the correct APN and Dial in number for Optus.
Do you have any other suggestions?
Thanks
Grant
qposil,gposil wrote:Below is info from vodafone on that modem,
This may help...name = "Huawei K3765"
version = "0.1"
author = u"Andrew Bird"
custom = HuaweiCustomizer
__remote_name__ = "K3765"
__properties__ = {
'usb_device.vendor_id': [0x12d1],
'usb_device.product_id': [0x1451, 0x1465],
}
def preprobe_init(self, ports, info):
if info['usb_device.product_id'] == 0x1465:
self.hardcoded_ports = (0,4) # auto probing can hang
else: # let probing occur
pass
huaweik3765 = HuaweiK3765()
I had most of the information above but how do I use it so my modem will be recognised/detected?
Thanks