4.3.2-SCSI 2.6.30.5 full older modem support
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
4.3.2-SCSI 2.6.30.5 full older modem support
Hi guys V2 brings a new GTK2 to 4 series:) but first the bad
first up I updated Seamonkey1 to the latest Seamonkey 2 with the latest gtk2 , but Its been sometime that I've updated Seamonkey from series 1 to and I forgot it no longer uses gtkmoz so the printing is broken and the Help Browser is broken, but below there is a pet to fix it. , I'll fix it for the next release its almost 5am Christmas eve and I haven't slept, I've been at it all night. (week also)
This is a partial list of updates
seamonkey-2.0.11
atk-1.32.0-i386
gdk-pixbuf-2.22.1-i386 <--new to 4 series
glib-2.26.1-i386
gtk+-2.22.1-i386
hunspell-1.2.11-i386 <-- new to 4 series
jpeg-7-i386 <-- new to 4 series
libXcomposite-16ae68-i386 <-- new to 4 series
pcre-8.11-i386
net_setnet_setup.up.
pburn.
pcd.
pmusic.
powerapplet.
pschedule.
usb-modeswitch.
This release was difficult because other woof releases I just added or edit files in the rootfs-complete folder, which is a lazy way and you can't give the updated files to rebuild on another pc. This time I did it the correct woof method by editing all the files, man that takes some learning.
anyways enjoy and Merry Christmas
and I'll upload the devx later on. Too tired now
ttuuxxx
Main iso
md5sum 80cf8c3fcf7f2ccb38275ee7964a681e
http://www.smokey01.com/ttuuxxx/4.3/002 ... SI-002.iso
DevX
md5sum 2fd2e3e83415de669bd14d0e66ae731c
http://www.smokey01.com/ttuuxxx/4.3/002/devx.sfs
V1 <--- First Release
http://www.smokey01.com/ttuuxxx/4.3/pup ... SI-001.iso
md5sum 13fac6628135ccc0189df1c0fe9e54ca
DevX
http://www.smokey01.com/ttuuxxx/4.3/devx_432.sfs
md5sum 68846fb1590391d3baed032fe7213f31
Well this is the default 4.3.2 build, I used barry's latest compile of 2.6.30.5 date sept4,2010 http://bkhome.org/blog/?viewDetailed=01796
Known issues
trayapplet package wasn't found
flash block and seamonkey_addon_user_agent_switcher wasn't included either.
everything else looks like it runs fine
ttuuxxx
LVM
http://www.murga-linux.com/puppy/viewto ... 667#483667
first up I updated Seamonkey1 to the latest Seamonkey 2 with the latest gtk2 , but Its been sometime that I've updated Seamonkey from series 1 to and I forgot it no longer uses gtkmoz so the printing is broken and the Help Browser is broken, but below there is a pet to fix it. , I'll fix it for the next release its almost 5am Christmas eve and I haven't slept, I've been at it all night. (week also)
This is a partial list of updates
seamonkey-2.0.11
atk-1.32.0-i386
gdk-pixbuf-2.22.1-i386 <--new to 4 series
glib-2.26.1-i386
gtk+-2.22.1-i386
hunspell-1.2.11-i386 <-- new to 4 series
jpeg-7-i386 <-- new to 4 series
libXcomposite-16ae68-i386 <-- new to 4 series
pcre-8.11-i386
net_setnet_setup.up.
pburn.
pcd.
pmusic.
powerapplet.
pschedule.
usb-modeswitch.
This release was difficult because other woof releases I just added or edit files in the rootfs-complete folder, which is a lazy way and you can't give the updated files to rebuild on another pc. This time I did it the correct woof method by editing all the files, man that takes some learning.
anyways enjoy and Merry Christmas
and I'll upload the devx later on. Too tired now
ttuuxxx
Main iso
md5sum 80cf8c3fcf7f2ccb38275ee7964a681e
http://www.smokey01.com/ttuuxxx/4.3/002 ... SI-002.iso
DevX
md5sum 2fd2e3e83415de669bd14d0e66ae731c
http://www.smokey01.com/ttuuxxx/4.3/002/devx.sfs
V1 <--- First Release
http://www.smokey01.com/ttuuxxx/4.3/pup ... SI-001.iso
md5sum 13fac6628135ccc0189df1c0fe9e54ca
DevX
http://www.smokey01.com/ttuuxxx/4.3/devx_432.sfs
md5sum 68846fb1590391d3baed032fe7213f31
Well this is the default 4.3.2 build, I used barry's latest compile of 2.6.30.5 date sept4,2010 http://bkhome.org/blog/?viewDetailed=01796
Known issues
trayapplet package wasn't found
flash block and seamonkey_addon_user_agent_switcher wasn't included either.
everything else looks like it runs fine
ttuuxxx
LVM
http://www.murga-linux.com/puppy/viewto ... 667#483667
- Attachments
-
- cups_Help_fix-1.pet
- (2.68 KiB) Downloaded 952 times
Last edited by ttuuxxx on Wed 05 Jan 2011, 06:17, edited 12 times in total.
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
Re: 4.3.2-SCSI 2.6.30.5 full older modem support
Well, ya did the testing for me....as with the last effort, Xyesa not working is a deal breaker. Based on your previous posts, I thought you said Xvesa would be one of the first things fixed.ttuuxxx wrote: Known issues
xvesa doesn't work
ttuuxxx
Thom
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Hi Thom boy your quick to jump, lol Listen Its just a first release of a default woof puppy4, Thats the way it comes, now with some help from the masses we can get this version working properly, also the NV and ATI drivers are working fine which is also nice
still needs more testing and lots of updates, so lets get to it shall we?
ttuuxxx
still needs more testing and lots of updates, so lets get to it shall we?
ttuuxxx
Last edited by ttuuxxx on Sat 18 Sep 2010, 09:51, edited 1 time in total.
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
also Seamonkey is a lot quicker on this version than the last one.
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
added the devx to the main post
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Vesa works but Xvesa doesn't, I've compiled Xvesa now but its the gui which isn't loading now, when selected. Still working on it
ttuuxxx
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
I prefer true vesa actually, a number of old box/monitor combinations of mine won't xvesa easily and only give 800x600@60hz with xorg while true vesa (60hz only) will allow 1280x1024.ttuuxxx wrote:Vesa works but Xvesa doesn't, I've compiled Xvesa now but its the gui which isn't loading now, when selected. Still working on it
ttuuxxx
downloading now
first level of testing (video and the like; and basic install) tomorrow am. see what I can break. 4 boxes with 4 different config's. Will report late pm.
Anything special to test or look out for ttuuxxx?
Also can you consider a bones version when you finally release please.
regards
scsijon
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Hmmm I just rebooted fresh and Xvesa worked, I wonder why it wouldn't work earlier, maybe it was loading a pupsave, well That's a good thing, too bad I just spent 2 hr compiling Xserver grrrrrrrrrrrrrrr.
ttuuxxx
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
How about I just make pet packages and post linksscsijon wrote:
Also can you consider a bones version when you finally release please.
regards
scsijon
I usually build woof the lazy way,
First make a release
Second make changes in the /woof-tree/woof-tree/rootfs-skeleton folder just add the new files and delete the old ones in the pet folders.
I should do it the right way, I'll think about it.
I don't have a clue what needs checking, it all runs nicely.
any ideas of what apps you would like to see in it?
lxtask,gaculator,htop etc
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
hmmm I don't see flashplayer anywhere either, that's strange it didn't complain about it being missing during the build, I'll check the build files.
ttuuxxx
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
nope no flash, that bites, It'll increase the iso size by 2-3MB alone. grrr
ttuuxxx
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
wierd, duplicate post 30 min apart?
Last edited by scsijon on Sat 18 Sep 2010, 12:15, edited 1 time in total.
bones version
Easy, anything that can be a .pet, should be.
Exceptions would be in the desktop, system, setup, utility, filesystems, network and internet directories, but bare minimum of all.
Do you want an actual list or does the above give you enough?
scsijon
Exceptions would be in the desktop, system, setup, utility, filesystems, network and internet directories, but bare minimum of all.
Do you want an actual list or does the above give you enough?
scsijon
Perhaps I should not be testing....here's what happensttuuxxx wrote:Hmmm I just rebooted fresh and Xvesa worked, I wonder why it wouldn't work earlier, maybe it was loading a pupsave, well That's a good thing, too bad I just spent 2 hr compiling Xserver grrrrrrrrrrrrrrr.
ttuuxxx
xorg probe gives various choices....picking 12?? by 10?? gives me 16?? by ?? But then, I can use xvesa to chose something that works.
Seamonkey works once with shoutcast.com....subsequent tries result in no audio.
Will not shut down...
With that many problems, I didn't go any further
Thom
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
The only thing that I find broken now is the audio, my pc shutdown fine with xorg and Xvesa, plus the choosing the resolution works fine on my pc also, which is the normal xorg driver you use? That could be the issue for both things shutdown and display. If I knew which driver regular puppies work for you, I could compile it.tlchost wrote:Perhaps I should not be testing....here's what happensttuuxxx wrote:Hmmm I just rebooted fresh and Xvesa worked, I wonder why it wouldn't work earlier, maybe it was loading a pupsave, well That's a good thing, too bad I just spent 2 hr compiling Xserver grrrrrrrrrrrrrrr.
ttuuxxx
xorg probe gives various choices....picking 12?? by 10?? gives me 16?? by ?? But then, I can use xvesa to chose something that works.
Seamonkey works once with shoutcast.com....subsequent tries result in no audio.
Will not shut down...
With that many problems, I didn't go any further
Thom
I'll work on alsa for now
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
Hi all
clean frugal install, no problem apart from the xvesa one that has been mentioned. I am getting top quality video and sound
Downloaded htop-0.8.1-i486-uj with ppm from the puppy 5 official list.
(did the same to 431 to make some comparisons)
432 will recognise and use a twin core chip, 431 just recognises it and uses it as a single chip.
Just got a few numbers to see how heavier 432 is on resources
using the free comand in terminal (memory used)
Action 431 432 change % rise
at rest 301168 325188 = 24020 = 7.9%
playing 8.7mb mp4 345308 379924 = 34616 = 10.0%
playing 103mb HDmp4 406172 450467 = 44295 = 10.9%
using Htop (mem)
Action 431 432 change % rise
at rest 35 44 = 9 = 25%
playing 8.7mb mp4 63 81 = 18 = 28%
playing 103mb HDmp4 76 94 = 18 = 23%
Edited to say: sorry about the figures it was a table when It was submited honest.
I am just trying to get an idea of the differences in changing the kernel.
More importantly how does 432 perform on older hardware that was happily using 431 (apart from the bugs)
Hope this helps
Stripe
clean frugal install, no problem apart from the xvesa one that has been mentioned. I am getting top quality video and sound
Downloaded htop-0.8.1-i486-uj with ppm from the puppy 5 official list.
(did the same to 431 to make some comparisons)
432 will recognise and use a twin core chip, 431 just recognises it and uses it as a single chip.
Just got a few numbers to see how heavier 432 is on resources
using the free comand in terminal (memory used)
Action 431 432 change % rise
at rest 301168 325188 = 24020 = 7.9%
playing 8.7mb mp4 345308 379924 = 34616 = 10.0%
playing 103mb HDmp4 406172 450467 = 44295 = 10.9%
using Htop (mem)
Action 431 432 change % rise
at rest 35 44 = 9 = 25%
playing 8.7mb mp4 63 81 = 18 = 28%
playing 103mb HDmp4 76 94 = 18 = 23%
Edited to say: sorry about the figures it was a table when It was submited honest.
I am just trying to get an idea of the differences in changing the kernel.
More importantly how does 432 perform on older hardware that was happily using 431 (apart from the bugs)
Hope this helps
Stripe
Stripe wrote:Hi all
clean frugal install, no problem apart from the xvesa one that has been mentioned. I am getting top quality video and sound
Downloaded htop-0.8.1-i486-uj with ppm from the puppy 5 official list.
(did the same to 431 to make some comparisons)
432 will recognise and use a twin core chip, 431 just recognises it and uses it as a single chip.
Just got a few numbers to see how heavier 432 is on resources
using the free comand in terminal (memory used)
Action 431 432 change % rise
at rest 301168 325188 = 24020 = 7.9%
playing 8.7mb mp4 345308 379924 = 34616 = 10.0%
playing 103mb HDmp4 406172 450467 = 44295 = 10.9%
using Htop (mem)
Action 431 432 change % rise
at rest 35 44 = 9 = 25%
playing 8.7mb mp4 63 81 = 18 = 28%
playing 103mb HDmp4 76 94 = 18 = 23%
Edited to say: sorry about the figures it was a table when It was submited honest.
I am just trying to get an idea of the differences in changing the kernel.
More importantly how does 432 perform on older hardware that was happily using 431 (apart from the bugs)
Hope this helps
Stripe
I'm not sure which version of 4.31 you're using for the comparison(4.30/4.31 had 3 or 4 different kernels available) but the default 4.31 kernel 2.6.30.5 was smp enabled and recognized and uses both cores of a dual-core.At least on my equipment.
Kernels available were.........pup-431-k2.6.21.7-scsi-intel_modems
pup-431-k2.6.25.16-intel_modems
pup-431-scsi-intel_modems.iso