Slacko 5.7 - March 2014

Please post any bugs you have found
Post Reply
Message
Author
User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#81 Post by 01micko »

Try updating PPM now for nvidia drivers
Puppy Linux Blog - contact me for access
User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#82 Post by James C »

01micko wrote:Try updating PPM now for nvidia drivers
Working correctly here now. Installing Nvidia driver with Video Upgrade Wizard.
User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#83 Post by James C »

# report-video
VIDEO REPORT: Slacko Puppy, version 5.7

Chip description:
VGA compatible controller: nVidia Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2)

Requested by /etc/X11/xorg.conf:
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Drivers requested to be loaded: nvidia

Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nvidia
Loaded modules: dbe dri dri2 extmod fb glx kbd mouse ramdac record wfb

Actual rendering on monitor:
Resolution: 1440x900 pixels (411x263 millimeters)
Depth: 24 planes

...the above also recorded in /tmp/report-video
#
User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#84 Post by bigpup »

01micko wrote:Try updating PPM now for nvidia drivers
Works for me now.

Puppy law 1.
If you really want testing, just say it is the official release. :evil: :twisted: :lol:
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)
User avatar
peebee
Posts: 4370
Joined: Sun 21 Sep 2008, 12:31
Location: Worcestershire, UK
Contact:

#85 Post by peebee »

Oops - sorry - mis-post - withdrawn
ImageLxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#86 Post by 01micko »

peebee, I saw your post, yes sfs manager is broken for devx.

Fix attached.
... real testing begins when you release ...
http://www.murga-linux.com/puppy/viewto ... 553#680553
Attachments
sfs-mgr-patch-1.pet
(2.57 KiB) Downloaded 356 times
Puppy Linux Blog - contact me for access
tlchost
Posts: 2057
Joined: Sun 05 Aug 2007, 23:26
Location: Baltimore, Maryland USA
Contact:

Pidgin

#87 Post by tlchost »

Can't seem to find any pidgin that works with 5.7 on a bootable usb drive.
Maybe one needs to be made for 5.7 ?

Thom
User avatar
killapup
Posts: 76
Joined: Wed 25 Apr 2012, 11:48
Location: Warwick, Qld, Australia

Re: Slacko 5.7 first boot.

#88 Post by killapup »

rufwoof wrote:
Whilst that's a PAE version, I suspect if you open a terminal and issue a command of

cat /proc/cpuinfo | grep pae

you'll likely see a return (i.e. have a cpu pae flag and hence have a pae supporting cpu)
Thanks, rufwoof, it indeed returns a flag to indicate pae compatibility, will try your suggestion soon.

Ray
Slacko 6.3.2 on
Asus X54C 4Gb RAM
Also VectorLinux64 plus many others :D
User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#89 Post by bigpup »

Not really a bug, but maybe something that needs to be talked about.

If you are using an SSD (Solid state drive).

Is SSD trim working in Slacko or any Puppy by default?

Does SSD trim need to be activated?
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)
User avatar
rufwoof
Posts: 3690
Joined: Mon 24 Feb 2014, 17:47

#90 Post by rufwoof »

01micko wrote:Try updating PPM now for nvidia drivers
Video upgrade wizard - test - nothing for my card/kernel

Update PPM - video upgrade wizard - NVIDIA upgrade available. Download and install and ..... problems. Quick flash of about 10 lines of directory (or file) not found when I drop out of X and run xorgwizard, then black graphical screen (hardshutdown as Ctrl-Alt-Backspace doesn't do anything obvious).

Tried reverting to prior saved savefile, expanding savefile space ... only to repeat the above.

Reverted for present back to prior (nv inbuilt) savefile.

Slacko 5.7 PAE, AMD64 3500+, 1.5GB RAM, frugal DVD booted, Nvidia GeForce 8xxx (old 15" CRT monitor).

Looks to me that whatever install process the NVIDIA upgrade uses, its not putting things where they're expected to be. Puppy's menu is being updated to show NVIDIA program installed, but clicking on that results in no apparent activity (i.e. likely the same file or directory not found errors occurring in the background).
User avatar
rufwoof
Posts: 3690
Joined: Mon 24 Feb 2014, 17:47

#91 Post by rufwoof »

PPM shows just i686 versions of the latest NVIDIA drivers, no latest PAE

After some retries/investigation it looks like :

Downloaded via the Video Upgrade puppy (jwm) menu option and there's no sufficient disk (savefile) space check. End up with mostly zero sized /usr/bin/nvidia* files

Install the latest i686 package via PPM however and it prompts for insufficient space, so expand savefile SFS and retry and it all installs OK.

I did have some grey screen outputs from youtubes with the latest install. That looks like its not nvidia however but rather flash. Update to the series 11 flash (I was on 10 series as the flash install menu item suggested there may be problems with latest versions under AMD's) and the grey flash screen problem disappears.
chillinfart
Posts: 88
Joined: Mon 22 May 2006, 18:43

#92 Post by chillinfart »

Seems that slacko still not friendly with intel Atom processors.

Slacko version of wcpufreq doesn't turn on CPU fan. I had this issue since 5.5.

Currently i'm testing slacko 5.7 (PAE version) on my compaq cq-10 netbook (Atom N450 1.66Ghz), before sending this version to my current main PC, a toshiba w/Turion x2 processor).

On 5.6 the video upgrade for it (has an AMD Radeon 3200HD) causes a kernel panic even with the correct version either from AMD or Slacko (12.6) while Windows version got a correct one (but is x64).

Which version of Catalyst downloads slacko 5.7? I know that Radeon 3000 Family has limited support on both OS (f*** AMD)

In the other hand, my netbook is running with a CF-SATA adapter (w/a 8GB Kingston CF card) and is faster than 5.6 in all aspects (even when it saves RAM to pup_save). However, i desire to control the save2flash behavior because is annonying and heats up my netbook (RAM module has no fan or heat sink).
chillinfart
Posts: 88
Joined: Mon 22 May 2006, 18:43

#93 Post by chillinfart »

bigpup wrote:01micko,

Something you may want to look at.

Trying to get VPN working in Slacko 5.6
http://www.murga-linux.com/puppy/viewtopic.php?t=92572

Not sure if this is a problem also in Slacko 5.7
If issue persists, follow these posts.

http://www.murga-linux.com/puppy/viewtopic.php?t=92572

As i upgraded from 5.6 i'm not sure if the /bin/ip issue is present (i patched it before upgrade).
User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#94 Post by bigpup »

chillinfart wrote: i desire to control the save2flash behavior because is annonying and heats up my netbook (RAM module has no fan or heat sink).
menu->System->Puppy Event Manager->Save Session

Set the save interval to 0

This turns off auto save.
Will now only save at shutdown or (USB flash drive installs) when you select the save icon on desktop,
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)
User avatar
peebee
Posts: 4370
Joined: Sun 21 Sep 2008, 12:31
Location: Worcestershire, UK
Contact:

Problem with nvidia/nouveau and 5.7pae

#95 Post by peebee »

Slacko 5.7pae crashes on my desktop with nvidia graphics.

Boots fine from a frugal install, but if you do:

System -> Hardinfo -> Summary

you get what in M$Win world would be a BSD except in Puppy its a speckled screen of death

Video details:
Video-Info 1.5.1 - Mon 17 Mar 2014 on Slacko Puppy 5.7.0 - Linux 3.10.32 i686

Chip description:
d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)
oem: NVIDIA
product: MCP61 - mcp61-86 Chip Rev

X Server: Xorg Driver used: nouveau

X.Org version: 1.12.4
dimensions: 1366x768 pixels (361x203 millimeters)
depth of root window: 24 planes
ImageLxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
gcmartin

#96 Post by gcmartin »

Yeah @Peebee, that a video sync issue for which, like you, I have not found a work-around when it occurs, except a cold start, reboot, and rerun xorgwizard to use VESA.

I've also tried to affect sync by:
  • monitor off-on
  • video cable out-in
In some of the PUPs I get this with Noveau as well. The nVidea cards in PUPs are a nuisance with various monitors.
User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Slacko 5.7 - March 2014

#97 Post by Billtoo »

I compiled the latest NVIDIA-Linux-x86-304.121.run proprietary driver
and it's working fine on this pc.

video-info-glx 1.5.3 Mon 17 Mar 2014 on Slacko Puppy 5.7.0 Linux 3.10.32 i686
0.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2)
oem: NVIDIA
product: GT216 Board - 0682vb12 Chip Rev

X Server: Xorg Driver: nvidia
X.Org version: 1.12.4
dimensions: 1920x1080 pixels (524x292 millimeters)
depth of root window: 24 planes

direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GT 220/PCIe/SSE2
OpenGL version string: 3.3.0 NVIDIA 304.121

Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
Core 0: @2003 1: @2003 MHz

So far at least.

EDIT:
On another Slacko 5.7 pae install I added the iStart extension to
Chromium, it works well.
Attachments
iStart.jpg
(44.16 KiB) Downloaded 2013 times
image-1.jpg
(45.63 KiB) Downloaded 1911 times
image-2.jpg
(56.52 KiB) Downloaded 1878 times
Last edited by Billtoo on Mon 17 Mar 2014, 17:34, edited 1 time in total.
User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

Re: Problem with nvidia/nouveau and 5.7pae

#98 Post by bigpup »

peebee wrote: X Server: Xorg Driver used: nouveau
I think the issue is using the Nouveau driver.

Try the "Video Upgrade Wizard"
See if it will give you a Nvidia manufactures driver to use.

Nouveau driver, for me, has never been very good with any of my Nvidia hardware.

I have read that the Nvidia technical staff is starting to help with development of the Nouveau driver. Maybe that driver will get better?
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)
User avatar
peebee
Posts: 4370
Joined: Sun 21 Sep 2008, 12:31
Location: Worcestershire, UK
Contact:

Re: Problem with nvidia/nouveau and 5.7pae

#99 Post by peebee »

bigpup wrote:
peebee wrote: X Server: Xorg Driver used: nouveau
I think the issue is using the Nouveau driver.

Try the "Video Upgrade Wizard"
See if it will give you a Nvidia manufactures driver to use.

Nouveau driver, for me, has never been very good with any of my Nvidia hardware.

I have read that the Nvidia technical staff is starting to help with development of the Nouveau driver. Maybe that driver will get better?
The problem is that the nouveau driver is chosen as default.....and hard crashes are not new user friendly.....
ImageLxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
User avatar
DrSunshine
Posts: 2
Joined: Wed 26 Feb 2014, 21:54
Location: United States

Realtek Wifi Firmware Not Found

#100 Post by DrSunshine »

Slacko detects and loads the module for my Realtek wifi card but it cannot find the firmware.

I have a Toshiba NB505.

Code: Select all

lspci -k:

Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n Wifi Adapter (rev 01)
    Subsystem: Realtek Semiconductor Co., Ltd. Device 8184
    Kernel driver in use: rtl8192ce
This is the right module to my knowledge.

Code: Select all

lsmod | grep rtl8192ce:

rtl8192ce          55442   0
retlwifi           69782   1   rtl8192ce
rtl8192c_common    41788   1   rtl8192ce
mac80211           175139  3   rtlwifi, rtl8192c_common, rtl8192ce

Code: Select all

dmesg:

rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
rtlwifi: Firmware rtlwifi/rtl8192cfw.bin not available

Code: Select all

iwconfig:

lo:       no wireless extensions.
eth0:     no wireless extensions.
Currently in Slacko 5.7, /lib/firmware/rtlwifi is a relative symlink to /lib/modules/all-firmware/rtlwifi/lib/firmware/rtlwifi

In Slack 5.6, it was directory with the *.bin files in it. No symlink.

I tried replacing the relative link with an absolute path link. Same condition described above.

I tried deleting the symlink, and copying the files from the destination directly into a /lib/firmware/rtlwifi directory but this causes a kernel oops when interacting with the interface.

When I tried copying the Slacko 5.6 /lib/firware/rtlwifi directory and replacing the symlink, it boots fine but when attemping to interact with the interface a kernel oops occurs. Not that I really expected two versions to really mesh.

I cannot think of any other workarounds to attempt, but the finer details of kernel/networking escape me.
Post Reply