LxPup : a Puppy with LXDE as its desktop environment
What kind of "networking" do you want to do?mistfire wrote:By the way, does the networking feature of PCManFM is enabled?
ftp is done by putting the ftp address into the location bar in PCManFM
samba - use the Puppy YASSM samba tools in the Network menu - the mounted shares will then appear in PCManFM
The gvs-smb backend is not included - this might work (untested):
http://pkgs.org/archlinux/archlinux-ext ... ar.xz.html
Last edited by peebee on Wed 26 Nov 2014, 12:20, edited 1 time in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
I also experience this behavior, wherein I have to click to show up the panels upon booting up LxPup.peebee wrote:The mouse click on startup is a known "feature".....Chris_W wrote: Strangely though, I still need to do a mouse click on startup to have the taskbar show up
Cheers
peebee
how to remove or disable this "feature" ?
Afraid I don't know - so if anybody has any ideas I'd be pleased to hear - its something to do with the pinboard I think.....neilalex wrote:I also experience this behavior, wherein I have to click to show up the panels upon booting up LxPup.peebee wrote:The mouse click on startup is a known "feature".....Chris_W wrote: Strangely though, I still need to do a mouse click on startup to have the taskbar show up
Cheers
peebee
how to remove or disable this "feature" ?
I've learnt to "live with it".....
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Ditto here. I tried and tried to no avail. I did put a target on one cow in the wallpaper on one friends machine labeled Click here to enter.peebee wrote:Afraid I don't know - so if anybody has any ideas I'd be pleased to hear - its something to do with the pinboard I think.....neilalex wrote:I also experience this behavior, wherein I have to click to show up the panels upon booting up LxPup.peebee wrote: The mouse click on startup is a known "feature".....
Cheers
peebee
how to remove or disable this "feature" ?
I've learnt to "live with it".....
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Not sure if this will help but your /root/.xinitrc is still starting jwmpeebee wrote:Afraid I don't know - so if anybody has any ideas I'd be pleased to hear - its something to do with the pinboard I think.....
I've learnt to "live with it".....
Code: Select all
which $CURRENTWM && exec $CURRENTWM
[ -x $CURRENTWM ] && exec $CURRENTWM
exec jwm
Code: Select all
which $CURRENTWM && exec $CURRENTWM
[ -x $CURRENTWM ] && exec $CURRENTWM
[ $CURRENTWM = jwm ] && exec jwm
Doesn't affect X-slacko as I've removed jwm but when building and jwm is still there I have to click the desktop to load xfce4-panel and xfdesktop.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
Many thanks rg66....rg66 wrote:Not sure if this will help but your /root/.xinitrc is still starting jwmpeebee wrote:Afraid I don't know - so if anybody has any ideas I'd be pleased to hear - its something to do with the pinboard I think.....
I've learnt to "live with it".....
Maybe something like thisCode: Select all
which $CURRENTWM && exec $CURRENTWM [ -x $CURRENTWM ] && exec $CURRENTWM exec jwm
or just comment it out because if $CURRENTWM = jwm then that line is redundant.Code: Select all
which $CURRENTWM && exec $CURRENTWM [ -x $CURRENTWM ] && exec $CURRENTWM [ $CURRENTWM = jwm ] && exec jwm
Doesn't affect X-slacko as I've removed jwm but when building and jwm is still there I have to click the desktop to load xfce4-panel and xfdesktop.
I had tried that (commenting out) and it didn't seem to make a difference.
JWM is not showing in the process list so I don't think its starting anyway....
I think its to do with the Rox pin command further up - however if I comment this line out then xwin fails.
It doesn't happen 100% of the time (for me) so its some sort of race condition I think - with problems if Rox? gets in first to claim the screen/pinboard. (speaking with little real knowledge here).
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Ya, I just did a few tests and leaving or commenting out "exec jwm" does nothing. It was the only thing I could think of since you had:
commented out which is the most important because if I don't it gives me a half and half desktop.
Code: Select all
if [ -f /root/Choices/ROX-Filer/PuppyPan1 ];then
rox -p /root/Choices/ROX-Filer/PuppyPin -r /root/Choices/ROX-Filer/PuppyPan1
else
rox -p /root/Choices/ROX-Filer/PuppyPin
fi
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
Please edit /root/.xinitrc (hidden file) as follows:
line #140 change to n.b. capital R important
line #204 comment out
Please test and report any problems.
Thanks
line #140 change to
Code: Select all
Rox --pinboard=
line #204 comment out
Code: Select all
#exec jwm
Thanks
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Edits as above. Two reboots tested, no mouseclick required to see panel etc. This on a machine that always required a mouseclick. My only question now is what do I do with the cow with the target on it I'll continue to use and test on the Bay Trail desktops also.peebee wrote:Please edit /root/.xinitrc (hidden file) as follows:
line #140 change ton.b. capital R importantCode: Select all
Rox --pinboard=
line #204 comment outPlease test and report any problems.Code: Select all
#exec jwm
Thanks
Edited: Also OK on ASRock Q1900M motherboard system (j1900 2GHz quad core Bay Trail-D processor). No mouseclick required to see panel etc.
Thanks,
Last edited by Marv on Mon 01 Dec 2014, 23:30, edited 1 time in total.
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
LxPup extra icons
Originally made for LxPup13.11, but they may be usefull for some people who uses these programs.
- Attachments
-
- simetrix48.png
- (6.56 KiB) Downloaded 2123 times
-
- saleae48.png
- (7.64 KiB) Downloaded 2128 times
-
- axepad48.png
- (7.64 KiB) Downloaded 2125 times
-
- arduino48.png
- (7.64 KiB) Downloaded 2119 times
Last edited by Volhout on Tue 02 Dec 2014, 20:52, edited 1 time in total.
LxPup14.12
LxPup14.12 has been uploaded....
This is the Slacko5.9.3 (Slacko6Beta2) flavour of LxPup with the non-pae kernel 3.4.94
Various small tweaks and tidy ups in reaction to comments on the forum - including the recent .xinitrc change.
Main significant change is the addition of the Compton compositor. This is disabled as default but can be switched on using the Boot Manager - Startup Apps or by using the Change Appearance menu. Compton is quite small and adds (optional) transparency, shadows and fading to the desktop environment.
I have been unable to find a GTK2 gui editor for the Compton configuration file so changes to the settings are done by editing the file directly and then restarting the window manager. (the best I have found is xcompton-tools rpm build for : PCLinuxOS but this uses command line switches rather than a configuration file so would need significant development). (There is a Qt based tool for LXQT).
Cheers
peebee
This is the Slacko5.9.3 (Slacko6Beta2) flavour of LxPup with the non-pae kernel 3.4.94
Various small tweaks and tidy ups in reaction to comments on the forum - including the recent .xinitrc change.
Main significant change is the addition of the Compton compositor. This is disabled as default but can be switched on using the Boot Manager - Startup Apps or by using the Change Appearance menu. Compton is quite small and adds (optional) transparency, shadows and fading to the desktop environment.
I have been unable to find a GTK2 gui editor for the Compton configuration file so changes to the settings are done by editing the file directly and then restarting the window manager. (the best I have found is xcompton-tools rpm build for : PCLinuxOS but this uses command line switches rather than a configuration file so would need significant development). (There is a Qt based tool for LXQT).
Cheers
peebee
Last edited by peebee on Mon 08 Dec 2014, 07:12, edited 1 time in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Memory
Hi PeeBee,
I know this is not the right forum for the question, but I stumble upon it using LxPup, so that is why I ask here.
The strength of puppy was that everything is in RAM (frugal install), and guess what.... even with browser cache set to 0, running 14.12 with a 512Mbyte save file 3/4 full...I am out of memory.... (If I open my browser with youtube).
This is a 1 Gbyte system.
Is there any alternative other than doing a full install ?
Can I copy my system (including the save file) to a full install ? Or do I have to start virgin, and add all the pets and stuff again ?
Thank you in advance for any tips....
P.S. it was quite confusing to see that some tools like HTOP, Taskmanager, tell me I use only 200 Mbyte....While Top shows me I use 900 Mbyte. It was only then that I realized what was going on.
I know this is not the right forum for the question, but I stumble upon it using LxPup, so that is why I ask here.
The strength of puppy was that everything is in RAM (frugal install), and guess what.... even with browser cache set to 0, running 14.12 with a 512Mbyte save file 3/4 full...I am out of memory.... (If I open my browser with youtube).
This is a 1 Gbyte system.
Is there any alternative other than doing a full install ?
Can I copy my system (including the save file) to a full install ? Or do I have to start virgin, and add all the pets and stuff again ?
Thank you in advance for any tips....
P.S. it was quite confusing to see that some tools like HTOP, Taskmanager, tell me I use only 200 Mbyte....While Top shows me I use 900 Mbyte. It was only then that I realized what was going on.
Re: Memory
Hi VolhoutVolhout wrote:Is there any alternative other than doing a full install ?
Can I copy my system (including the save file) to a full install ? Or do I have to start virgin, and add all the pets and stuff again ?
Thank you in advance for any tips....
P.S. it was quite confusing to see that some tools like HTOP, Taskmanager, tell me I use only 200 Mbyte....While Top shows me I use 900 Mbyte. It was only then that I realized what was going on.
I suspect I'm not the best person to answer as I only ever do frugal installs - never ever done a full install of any Puppy except Quirky!
I would imagine that watching a YouTube video in your browser is pretty memory intensive....but it will depend on which browser and how it has been written to buffer the video....
AFAIK - both frugal installs and full installs load all Puppy programs into memory up to the limit of your available memory. Same goes for any additional SFS or Pets you have installed. If you haven't got enough physical memory and you haven't got a swap space setup then programs will be loaded from disk as and when needed.
So the first thing I would suggest is to setup a swap area on your disk if you have not already done so. http://puppylinux.org/wikka/SwapFile may help.
The free command should give an accurate memory usage snapshot. top shows usage in kb whereas htop displays mb.....I think
As for converting a frugal install to a full install - I don't think you should need to do it - but here's an old thread if you do: http://www.murga-linux.com/puppy/viewtopic.php?t=49330
Otherwise - suggest you post a query in Forum index » House Training » Beginners Help ( Start Here)
This may be useful - Understanding mounts/memory/RAM & filesystems/_save file
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
wlan automatic with Lxpup 13.01 & impossible with 14.10
Before with LxPup 13.01 it was easy to connect to the web;
Now I have tried all the latest LxPup versions and none is able to connect to the web with my wireless usb modem;
I have a D-Link wlan usb drive; in release 13.01 the system 'sees' the modem automatically after booting;
In 14.10 the driver is installed but somehow neither frisbee nor Dougal's nor SNS can connect, the wlan is down;
I have tried everything I could but I can't connect to the web now.
I would appreciate any help since it is hard to do anything without a connection to the internet.
Thanks for your help.
Now I have tried all the latest LxPup versions and none is able to connect to the web with my wireless usb modem;
I have a D-Link wlan usb drive; in release 13.01 the system 'sees' the modem automatically after booting;
In 14.10 the driver is installed but somehow neither frisbee nor Dougal's nor SNS can connect, the wlan is down;
I have tried everything I could but I can't connect to the web now.
I would appreciate any help since it is hard to do anything without a connection to the internet.
Thanks for your help.
Re: wlan automatic with Lxpup 13.01 & impossible with 14.10
Please see earlier discussion - suspect you have the same problem....stuvxz wrote:I have a D-Link wlan usb drive;
In 14.10 the driver is installed but somehow neither frisbee nor Dougal's nor SNS can connect, the wlan is down;
I would appreciate any help since it is hard to do anything without a connection to the internet.
Thanks for your help.
Run lsmod in a terminal - if the wl driver is being loaded please blacklist it using System - System - Boot Manager - Modules
then reboot.
If this doesn't work, please run dmesg in a terminal and see if there are any error messages wrt your wifi - most likely will be missing firmware messages.
I'm assuming that you are running the LxPupTahr14.10-pae flavour??
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
thanks PeeBee,
I should have said that my HDD is dead and that I am running puppy live from an usb drive for the last 2 years - I can remix it though, for a more permanent solution.
I have tried with every major release since LxPup 13.01. And I have searched in the foruns and tried what is proposed in some of them. One of the advices I got was to buy another usb modem... which does not make much sense since the modem works fine with the previous versions.
I tried with 13.04 beta, 14, 14.10, pae, retro, Racy, you name it.
Only 13.01 works.
And the fact that it is so easy to get online with 13.01 is very frustrating.
I would stick with 13.01 but it is slow with my PC and I am starting to have a lot of dependencies issues with more recent apps I need to use for school.
The library where I am now is closing and I must go but tomorrow I will try what you proposed and give a feedback.
I should have said that my HDD is dead and that I am running puppy live from an usb drive for the last 2 years - I can remix it though, for a more permanent solution.
I have tried with every major release since LxPup 13.01. And I have searched in the foruns and tried what is proposed in some of them. One of the advices I got was to buy another usb modem... which does not make much sense since the modem works fine with the previous versions.
I tried with 13.04 beta, 14, 14.10, pae, retro, Racy, you name it.
Only 13.01 works.
And the fact that it is so easy to get online with 13.01 is very frustrating.
I would stick with 13.01 but it is slow with my PC and I am starting to have a lot of dependencies issues with more recent apps I need to use for school.
The library where I am now is closing and I must go but tomorrow I will try what you proposed and give a feedback.
Re: wlan automatic with Lxpup 13.01 & impossible with 14.10
On initial set up on my Laptop which has Intel 4965 wifi chip, I was able to setup wifi. On reboot there was no wifi. I followed the above instructions and black listed the wl driver. On reboot wifi now working again.peebee wrote:
Please see earlier discussion - suspect you have the same problem....
Run lsmod in a terminal - if the wl driver is being loaded please blacklist it using System - System - Boot Manager - Modules
then reboot.
If this doesn't work, please run dmesg in a terminal and see if there are any error messages wrt your wifi - most likely will be missing firmware messages.
I'm assuming that you are running the LxPupTahr14.10-pae flavour??
Cheers
peebee
All is good now. Thanks.
LxPup64
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64