EmSee-Tahr
EmSee-Tahr
This experiment built from woof-ce tahr as configured by 666philb. Then using quickpet upgraded to 6.0.2 in stages. I left it labelled as 6.0.1 though.
k-4.0.2-pae
changeon
simple-remaster
niui/nicons
megasync
slocategui
Chrome2pet
GoogleMapsLocator
libreoffice 4.4.2
libreoffice-get
kodi
vlc
canon scangearmp
candi
deadbeef
This is just a peak.
k-4.0.2-pae
changeon
simple-remaster
niui/nicons
megasync
slocategui
Chrome2pet
GoogleMapsLocator
libreoffice 4.4.2
libreoffice-get
kodi
vlc
canon scangearmp
candi
deadbeef
This is just a peak.
- Attachments
-
- capture10707.jpg
- (45.56 KiB) Downloaded 2308 times
Im interested about the wonderful Tahrpup with a newer kernel, ill give a try. Later my impressions.
Thank you stemsee
Thank you stemsee
[i]Pupjibaro 1.0.4 2015 / LxpupTahr 15.05.2 - Live USB - Dell D630
Precise 5.7.1 - Full installation - Asus EeePC 701 4G (2 GB RAM)
Carolina Vanguard Frugal /Arch Linux Antergos - Lenovo G4070[/i]
Precise 5.7.1 - Full installation - Asus EeePC 701 4G (2 GB RAM)
Carolina Vanguard Frugal /Arch Linux Antergos - Lenovo G4070[/i]
Hello, stemsee.
Things I liked about your TahrPup:
Very complete offering of programs
Nice backgrounds
LibreOffice already in.
Good set of abiword plugins.
Things I didn't like:
Trashcan and Connect icons don't recognize the .DirIcon file in their
respective folders
No right-click menu to speak of... We're trying to emulate xfce, are we?
No possiblity to create the pupsave file at the end of the session. There
was a message in red saying: "Not enough space on partition" (not literal),
whereas I had 16 Gb's on that ext3 partition to create the pupsave. Now
that's pretty serious.
Too many darkish gtk themes. It's a pain trying to read black characters
on a dark gray background on some of those themes. You offer a few
well-contrasted white-ish themes, but IMO, they're sort of run-of-the-mill.
The screen still blinks every minute or so, like in the original TahrPup by
666philb. Quite annoying after a while. Makes you think there's something
wrong with your graphics card, when it is not the case. Not your fault, of
course. I read a little about it, and as far as I could understand the
problem, it's a glitch in the newer X version, apparently.
After I edited the jwm tray to "hidden" (also set clock to _%R_ and a
wider xload), nothing happened when I recycled jwm.
And of course I still prefer my CLI slocate wrapper over yours.
~~~~~~~~~~
So... I think I'll stay put and not upgrade... Sorry...
BFN.
musher0
Things I liked about your TahrPup:
Very complete offering of programs
Nice backgrounds
LibreOffice already in.
Good set of abiword plugins.
Things I didn't like:
Trashcan and Connect icons don't recognize the .DirIcon file in their
respective folders
No right-click menu to speak of... We're trying to emulate xfce, are we?
No possiblity to create the pupsave file at the end of the session. There
was a message in red saying: "Not enough space on partition" (not literal),
whereas I had 16 Gb's on that ext3 partition to create the pupsave. Now
that's pretty serious.
Too many darkish gtk themes. It's a pain trying to read black characters
on a dark gray background on some of those themes. You offer a few
well-contrasted white-ish themes, but IMO, they're sort of run-of-the-mill.
The screen still blinks every minute or so, like in the original TahrPup by
666philb. Quite annoying after a while. Makes you think there's something
wrong with your graphics card, when it is not the case. Not your fault, of
course. I read a little about it, and as far as I could understand the
problem, it's a glitch in the newer X version, apparently.
After I edited the jwm tray to "hidden" (also set clock to _%R_ and a
wider xload), nothing happened when I recycled jwm.
And of course I still prefer my CLI slocate wrapper over yours.
~~~~~~~~~~
So... I think I'll stay put and not upgrade... Sorry...
BFN.
musher0
Last edited by musher0 on Sat 13 Jun 2015, 16:43, edited 1 time in total.
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
Nice review!
Acrid as always
Thanks. But no need to say sorry, I am not expecting anyone to abandon their personalised favourite spin in favour of my dated experimental beta-release candidate! While Unicorn, April, Vivid, slacko 14.1 and Jessie spins are filling the shelves in this free-to-purchase pet shop. I am the one who should say sorry for uninvitedly filling empty shelf space with oversized products! Yet only 1/4 of an 8GB image!
A plus tard, mon ami! C'est la vie!
stemsee
Acrid as always
Thanks. But no need to say sorry, I am not expecting anyone to abandon their personalised favourite spin in favour of my dated experimental beta-release candidate! While Unicorn, April, Vivid, slacko 14.1 and Jessie spins are filling the shelves in this free-to-purchase pet shop. I am the one who should say sorry for uninvitedly filling empty shelf space with oversized products! Yet only 1/4 of an 8GB image!
A plus tard, mon ami! C'est la vie!
stemsee
Hi, stemsee.
Acrid... Well, at least with me, you know what I think! Besides, I did
compliment your puplet on a few things, no?
Hopefully, my criticism didn't get you too depressed?!
The only real downer for me was not being able to create a pupsave.
The other things are not that important:
for beginners: it has everything a beginner would want in a distro.
Puppy needs more of these.
BFN.
musher0
Acrid... Well, at least with me, you know what I think! Besides, I did
compliment your puplet on a few things, no?
Hopefully, my criticism didn't get you too depressed?!
The only real downer for me was not being able to create a pupsave.
The other things are not that important:
- gtk-themes are a dime a dozen;
I've been using right-click menus ever since liteshell, so I'm addicted.
But I realize newbies can find it confusing;
the .DirIcon problem is probably just a bump in the road;
as to jwm, it's easy to change to some other wm anyway, like icewm,
pekwm or wmx.
for beginners: it has everything a beginner would want in a distro.
Puppy needs more of these.
BFN.
musher0
Last edited by musher0 on Tue 19 May 2015, 15:53, edited 1 time in total.
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
I had the same problem with EmSee-Vivid.musher0 wrote: No possiblity to create the pupsave file at the end of the session. There
was a message in red saying: "Not enough space on partition" (not literal),
whereas I had 16 Gb's on that ext3 partition to create the pupsave. Now
that's pretty serious.
http://www.murga-linux.com/puppy/viewto ... 089#846089
I just put an empty "vividsave" folder (in this case tahrsave) in the frugal directory with the vmlinuz,initrd and sfs files.....saving now.
Don't know if the new users would figure that out though.....
Hello, all.
This ready-made 960Mb pupsave solved the session-save problem for me.
BFN.
musher0
This ready-made 960Mb pupsave solved the session-save problem for me.
BFN.
musher0
- Attachments
-
- tahrsave-arf.2fs.zip.zip
- Unzip twice in EmSeeTahr's /mnt/home folder and reboot.
- (5.27 KiB) Downloaded 461 times
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
- Puppus Dogfellow
- Posts: 1667
- Joined: Tue 08 Jan 2013, 01:39
- Location: nyc
musher, how can you change it so it by default spits out all its results?musher0 wrote:Hello, stemsee.
[...]
And of course I still prefer my CLI slocate wrapper over yours.
[...]
musher0
thanks.
related to stemsee's offering--is there a possibility that the databases don't work if musher's is installed first--i think that' the situation i'm in...
(apologies for going off topic, since no one else ever seems to have had any difficulty with it and it appears to be a solid part of tahr...)
Hello, Puppus.
Answer 1) Nope. The slocate database is coded to be very compact. It
unfolds on-screen ok, but I'd have to reverse-engineer it to get straight
text and I don't know how.
Besides, slavvo7 probably has exactly what you need (browse that thread
and you'll find his implementation, based on find rather than slocate).
Answer 2) Yep. It's one or the other. Remove mine if you wish, I'm hard to offend!
BFN.
musher0
Answer 1) Nope. The slocate database is coded to be very compact. It
unfolds on-screen ok, but I'd have to reverse-engineer it to get straight
text and I don't know how.
Besides, slavvo7 probably has exactly what you need (browse that thread
and you'll find his implementation, based on find rather than slocate).
Answer 2) Yep. It's one or the other. Remove mine if you wish, I'm hard to offend!
BFN.
musher0
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
- Puppus Dogfellow
- Posts: 1667
- Joined: Tue 08 Jan 2013, 01:39
- Location: nyc
nope, find doesn't cut it.musher0 wrote:Hello, Puppus.
Answer 1) Nope. The slocate database is coded to be very compact. It
unfolds on-screen ok, but I'd have to reverse-engineer it to get straight
text and I don't know how.
Besides, slavvo7 probably has exactly what you need (browse that thread
and you'll find his implementation, based on find rather than slocate).
Answer 2) Yep. It's one or the other. Remove mine if you wish, I'm hard to offend!
BFN.
musher0
your database-making and update scripts are appreciated.
thanks.
Sorry I couldn't be of more help...Puppus Dogfellow wrote:nope, find doesn't cut it.musher0 wrote:Hello, Puppus.
Answer 1) Nope. The slocate database is coded to be very compact. It
unfolds on-screen ok, but I'd have to reverse-engineer it to get straight
text and I don't know how.
Besides, slavvo7 probably has exactly what you need (browse that thread
and you'll find his implementation, based on find rather than slocate).
Answer 2) Yep. It's one or the other. Remove mine if you wish, I'm hard to offend!
BFN.
musher0
your database-making and update scripts are appreciated.
thanks.
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)