WIFI in slacko-5.3.3-4g-SCSI

[leveraldol8]

What do I have to do to connect to the WIFI internet? I have already tested all the options and I can not access the internet.

[Burn_IT]

You need a wireless router AND a wireless network card for a start.

[foxpup]

If you are sure you have wifi in the house and in the machine, it is possible you do not have the right driver.

[leveraldol8]

You need a wireless router AND a wireless network card for a start.

I have a wireless router and a wireless network card (wireless network adapter wifi antenna for desktop). I can use the internet perfectly in Windows.

[Burn_IT]

What card do you have?
Post the details of the card connected to the router in Windows. That will give a clue as to what might be different under Puppy.

[leveraldol8]

What card do you have?
Post the details of the card connected to the router in Windows. That will give a clue as to what might be different under Puppy.

[ 802.11n USB Wireless LAN Card ]
Network adapter properties:
Network Adapter: 802.11n USB Wireless LAN Card
Interface Type: 802.11 Wireless Ethernet
Hardware Address: 20-E9-17-03-0A-08
Connection Name: Wireless Network Connection
Connection speed: 58500 kbps


[Microsoft Virtual WiFi Miniport Adapter]
Network adapter properties:
Microsoft Virtual WiFi Miniport Adapter Network Adapter
Interface Type 802.11 Wireless Ethernet
Hardware Address 20-E9-17-03-0A-09
Connection Name Wireless Network Connection 2
MTU 1500 bytes
Received bytes 0
Bytes sent 0

[bigpup]

Sorry, but That does not really tell us what we need to know.

wireless network card (wireless network adapter wifi antenna for desktop)

Can you tell use the make and model of this?
menu>System>Pup-Sysinfo>Devices may list it.

Slacko 5.3.3 does not have the needed driver for the hardware.
The hardware is probably too new.
So, we need to figure out what driver it needs.

Easy fix is to use a newer version of Puppy.
Slacko 5.7
Slacko 6.3.2
Tahrpup
Xenialpup
Etc....