Xenialpup 7.5 CE black screen blinking line after install
Xenialpup 7.5 CE black screen blinking line after install
so i have been give an old dell mini 910 had no os on it so wanted to install Xenialpup 7.5 CE to the 8gb ssd
i put it on a flash stick booted it up and everything works great as it loaded drivers for wifi sound and Intel video so i formatted the the 8gb ssd ect in GParted ready to install it i have the iso on another usb so i plugged it in and mounted it and did the setup one done i shut down the pc and took the usb out and after the dell logo went away it just booted to a black screen with a blinking white line in the top left side
so i tried installing it again with a boot loader and when i select it on the list i still got the same thing
what could be causing this as this is a really good os and runs really well on this netbook but don't want to have to have the usb plugged in all the time to use it
or is there another popular os that is still getting updates and has lots of support i should use on this netbook ? i heard you can run mac os but i think i need to have the 16gb ssd model
i put it on a flash stick booted it up and everything works great as it loaded drivers for wifi sound and Intel video so i formatted the the 8gb ssd ect in GParted ready to install it i have the iso on another usb so i plugged it in and mounted it and did the setup one done i shut down the pc and took the usb out and after the dell logo went away it just booted to a black screen with a blinking white line in the top left side
so i tried installing it again with a boot loader and when i select it on the list i still got the same thing
what could be causing this as this is a really good os and runs really well on this netbook but don't want to have to have the usb plugged in all the time to use it
or is there another popular os that is still getting updates and has lots of support i should use on this netbook ? i heard you can run mac os but i think i need to have the 16gb ssd model
Last edited by jamespoo on Sun 04 Feb 2018, 05:13, edited 1 time in total.
Xenialpup 7.5 CE black screen blinking line after install
Are you trying to install 32bit or 64bit? I have had situations where the 64bit will run off USB but will not install. Dell Mini 9 with 1GB RAM and Atom based processor would work best with 32 Bit IMO
Re: Xenialpup 7.5 CE black screen blinking line after install
its the 32-bit version and my netbook has 2gb ramlinbie wrote:Are you trying to install 32bit or 64bit? I have had situations where the 64bit will run off USB but will not install. Dell Mini 9 with 1GB RAM and Atom based processor would work best with 32 Bit IMO
Do you mean ext4? ext3 is also good, even better for Puppy.i formatted the the 8gb ssd ect
And did you set the boot flag on the partition? You can do that in gParted.
Next thing would be to look into the menu.lst on the ssd. Something could be set up not quite right there by grub4dos.
BTW, the iso you use looks like the right one, 32bit, for your machine.
i used ext4 msdos in gparted and ticked boot on the flag listfoxpup wrote:Do you mean ext4? ext3 is also good, even better for Puppy.i formatted the the 8gb ssd ect
And did you set the boot flag on the partition? You can do that in gParted.
Next thing would be to look into the menu.lst on the ssd. Something could be set up not quite right there by grub4dos.
BTW, the iso you use looks like the right one, 32bit, for your machine.
also do i even need to have grub4dos installed as this will be the only os i install on the netbook
Did you see this topic? http://murga-linux.com/puppy/viewtopic.php?t=106783Maybe it is something with SSD.
Anyway, what is in your menu.lst?
I do not find "ext4 msdos" in my gParted, only "ext4", but I guess that is the same.i used ext4 msdos in gparted and ticked boot on the flag list
You do need some bootloader, but not necessarily grub4dos. It used to be the preferred bootloader for Puppy though, maybe bot anymore. Maybe grub4dos does not install well on SSD? I have never installed it on SSD.also do i even need to have grub4dos installed as this will be the only os i install on the netbook
Anyway, what is in your menu.lst?
how to view menu.lst?foxpup wrote:Did you see this topic? http://murga-linux.com/puppy/viewtopic.php?t=106783Maybe it is something with SSD.
I do not find "ext4 msdos" in my gParted, only "ext4", but I guess that is the same.i used ext4 msdos in gparted and ticked boot on the flag list
You do need some bootloader, but not necessarily grub4dos. It used to be the preferred bootloader for Puppy though, maybe bot anymore. Maybe grub4dos does not install well on SSD? I have never installed it on SSD.also do i even need to have grub4dos installed as this will be the only os i install on the netbook
Anyway, what is in your menu.lst?
If you use the installer from Puppy, it is an option to install it. It is hidden at the beginning of your booting device and it is the first thing that starts, before the loader. That is the way "legacy" boot goes.
Maybe there is no mbr yet on the ssd. Was there an os on it before? If not you have to install an mbr.
Maybe there is still an old one on it, and if it was from windows, it will search for "bootmgr" and not "grldr".
You could try to rename "grldr" to "bootmgr" then.
Maybe there is no mbr yet on the ssd. Was there an os on it before? If not you have to install an mbr.
Maybe there is still an old one on it, and if it was from windows, it will search for "bootmgr" and not "grldr".
You could try to rename "grldr" to "bootmgr" then.
when i got the netbook i formatted the ssd because it was running windows xp on it and had porn and other stuff i did not wantfoxpup wrote:If you use the installer from Puppy, it is an option to install it. It is hidden at the beginning of your booting device and it is the first thing that starts, before the loader. That is the way "legacy" boot goes.
Maybe there is no mbr yet on the ssd. Was there an os on it before? If not you have to install an mbr.
Maybe there is still an old one on it, and if it was from windows, it will search for "bootmgr" and not "grldr".
You could try to rename "grldr" to "bootmgr" then.
When you boot from usb, look on you SSD. You should find a file "grldr" there because you installed a bootloader and grldr is the bootloader for grub4dos. Rename it to "ntldr", shut down, take out your usb and try to boot from SSD.
If I am wright that the mbr of windows is still there, it will find "ntldr" and boot grub4dos!
If I am wright that the mbr of windows is still there, it will find "ntldr" and boot grub4dos!
Have you changed anything on your usb? Why did you take out the usb? Let it boot the Puppy on your usb.jamespoo wrote:i plugged back in the usb to load puppy up and it did not start loading a live version of puppy it just loaded grubfordos and i took the usb out and then selected the os so i think grubfordos install on the usb i think this could be the problem
THANKS BOOTING NOW TY thanks for the help tyfoxpup wrote:When you boot from usb, look on you SSD. You should find a file "grldr" there because you installed a bootloader and grldr is the bootloader for grub4dos. Rename it to "ntldr", shut down, take out your usb and try to boot from SSD.
If I am wright that the mbr of windows is still there, it will find "ntldr" and boot grub4dos!
also do i have to install the whole xenialpup os again when there is an update or is there a way on the os to check for and install updates or is the os not being updated?
EDIT: I got the quote all wrong here. Correction.
If you have a problem, have a look in the thread of the puppy you are using.
There is a lot of developping going on which you can follow more or less on this forum.
I like to look for a new puppy in development to try it out. You get a pretty good idea subscribing to the Puppy Linux Newsletters also.
One tip for newcomers: install Puppy frugally and not full: It is fast, easy, you can do it manually yourself, it is safer and it is the way Puppy is made to be installed.
Great! You're welcome!jamespoo wrote:THANKS BOOTING NOW TY thanks for the help ty
In Menu>Setup I find Xenialpup updates. You could check that from time to time. But in general Puppy does not need a lot of updating.also do i have to install the whole xenialpup os again when there is an update or is there a way on the os to check for and install updates or is the os not being updated?
If you have a problem, have a look in the thread of the puppy you are using.
There is a lot of developping going on which you can follow more or less on this forum.
I like to look for a new puppy in development to try it out. You get a pretty good idea subscribing to the Puppy Linux Newsletters also.
One tip for newcomers: install Puppy frugally and not full: It is fast, easy, you can do it manually yourself, it is safer and it is the way Puppy is made to be installed.
Last edited by foxpup on Mon 05 Feb 2018, 08:54, edited 1 time in total.