Page 60 of 66
/usr/local/bin/pnscan
Posted: Fri 21 Feb 2020, 13:34
by thinkpadfreak
Hello.
/usr/local/bin/pnscan is identified as a malware by ClamAV.
Bionicpup64 also has /usr/bin/pnscan, so there are two of "pnscan."
I wonder what to do with the situation.
Posted: Fri 21 Feb 2020, 17:45
by OscarTalks
The executable /usr/local/bin/pnscan is 32bit in a 64bit distro
Looks like it was installed as one of the files of PeasyPort LAN Scanner.
Probably best to delete it.
The executable /usr/bin/pnscan is the correct 64bit version. The peasyport script will be calling this one as it has priority anyway (/usr/bin has priority over /usr/local/bin).
I wonder if ClamAV will still complain with the 32bit one removed? If so I reckon you should ignore it or regard it as a false result and add it to a list of such if possible.
Someone with more knowledge than me will correct me if I am wrong.
Posted: Sat 22 Feb 2020, 01:28
by thinkpadfreak
OscarTalks wrote:
The executable /usr/local/bin/pnscan is 32bit in a 64bit distro
I did not know it was a 32bit executable.
I wonder if ClamAV will still complain with the 32bit one removed?
No. ClamAV identifies only /usr/local/bin/pnscan as a malware.
Now I am relieved. Thank you for the information.
Posted: Sun 23 Feb 2020, 21:28
by bigpup
New version released.
Uextract v4.0
http://www.murga-linux.com/puppy/viewtopic.php?t=87864
Version 4.0:
- AppRun: add GtkDialog GUI (Xdialog as a fallback)
- added '-s, --skip-symlinks' CLI option (do not follow symlinks)
- extract in the symlink's dir, not the target's
- can extract most of compressed initrd* files in one go
- use also 7z to extract DEB
- extract attachments from video files
- better compatibility with older/BusyBox versions of 'fdisk'
- fix extracting absolute symlinks from RAR archives (thanks to don570)
- refactoring, fixes, improvements
Posted: Mon 24 Feb 2020, 16:06
by 666philb
thinkpadfreak wrote:OscarTalks wrote:
The executable /usr/local/bin/pnscan is 32bit in a 64bit distro
I did not know it was a 32bit executable.
I wonder if ClamAV will still complain with the 32bit one removed?
No. ClamAV identifies only /usr/local/bin/pnscan as a malware.
Now I am relieved. Thank you for the information.
hi thinkpadfreak & OscarTalks,
i think the 32bit pnscan in /usr/local/bin got into the distro by woofce grabbing the wrong peasyport.pet which includes pnscan.
interestingly the 64bit pnscan (which is the official ubuntu version) in /usr/bin is also detected as malware when uploaded to virustotal, although clamav misses it.
it seems that it can be used as a hacktool and is not malware in itself. see this post at pnscans github page
https://github.com/ptrrkssn/pnscan/issues/2
Posted: Thu 27 Feb 2020, 22:30
by bigpup
If you have a computer that has this Intel WIFI hardware.
WIFI : Intel(R) Dual Band Wireless-AC 3165
Here is a pet for the firmware.
http://www.murga-linux.com/puppy/viewto ... &id=126858
Thanks go to ozsouth for making this pet!
Not sure if the kernel supports it, but hopefully it does.
Constant needed updating to support newer hardware.
Posted: Mon 23 Mar 2020, 08:44
by bigpup
nic007 put all his very good scripts together into one package.
A lot of useful stuff in this one package.
Download and unzip to the SFS package.
Use SFS-load-on-the-fly to load it.
Puts entry to access all of them in menu->Utility
nicOS-Utility-Suite
http://www.murga-linux.com/puppy/viewtopic.php?t=118382
Posted: Mon 30 Mar 2020, 10:36
by linuxcbon
Bionicpup64 8.0 CE
2 packages are needed for steam :
On steam, I tried to run "path of exile" with proton 5, but I got this error :
Code: Select all
<module>
import filecmp
ModuleNotFoundError: No module named 'filecmp'
I installed libpython3.6-stdlib from the ppm and it solved it. So that package is needed for bionicpup.
Also another package "xdg-utils" is needed to solve this :
Code: Select all
sh: xdg-icon-resource: command not found
Steam Proton didn't work.
Posted: Thu 02 Apr 2020, 14:51
by gellert234
Posted: Thu 02 Apr 2020, 20:52
by 666philb
linuxcbon wrote:Bionicpup64 8.0 CE
2 packages are needed for steam :
On steam, I tried to run "path of exile" with proton 5, but I got this error :
Code: Select all
<module>
import filecmp
ModuleNotFoundError: No module named 'filecmp'
I installed libpython3.6-stdlib from the ppm and it solved it. So that package is needed for bionicpup.
Also another package "xdg-utils" is needed to solve this :
Code: Select all
sh: xdg-icon-resource: command not found
hi linuxcbon,
libpython3.6-stdlib is installed automatically when the steam pet installs. make sure to run quickpet updates or you will be offered the older version which doesn't.
i'll have a look at xdg-icon-resource, although it doesn't effect the running of windows steam games, and may have zero effect in puppy.
BTW installing xdg-utils from the PPM breaks puppy which is why it shows as already installed so as not to be brought in when installing apps.
Re: Steam Proton didn't work.
Posted: Thu 02 Apr 2020, 20:53
by 666philb
hi gellert234,
can you tell me what is different about this steam package? so that i can update the one in the repo if necessary
Posted: Fri 03 Apr 2020, 17:40
by Caver69
Hallos, not sure if i would post this here but there seems to be a networking
bug in the latest release i DLed today the x64 v8.0.
When i run the live environment my network runs ok. When i now install it
(frugal install) and make a save file and reboot i can't get the net interface to come back up.
It uses the ath5k driver for the atheros wlan wich is correct. Any hints?
Caved
Re: Steam Proton didn't work.
Posted: Fri 03 Apr 2020, 17:58
by gellert234
666philb wrote:
hi gellert234,
can you tell me what is different about this steam package? so that i can update the one in the repo if necessary
Hi 666philb,
I modified the package to automatically install libpython3.6-stdlib instead of libpython3-stdlib and I update the download link because the link was bad.
https://mega.nz/file/uhRBSIyJ#m6XuQmVKs ... E93SwUBJBw
Posted: Fri 03 Apr 2020, 18:00
by 666philb
Caver69 wrote:Hallos, not sure if i would post this here but there seems to be a networking
bug in the latest release i DLed today the x64 v8.0.
When i run the live environment my network runs ok. When i now install it
(frugal install) and make a save file and reboot i can't get the net interface to come back up.
It uses the ath5k driver for the atheros wlan wich is correct. Any hints?
Caved
hi Caver69
try one of the other network managers, i have to use frisbee for mine to connect
Posted: Sat 04 Apr 2020, 08:10
by peebee
I can't see a fix for this in bionic64fix.zip ..... using checkdeps -system:
bionicpup64-8.0
Start: Sat Apr 4 07:49:33 +08 2020
* Checking system dirs: /bin /usr/libexec /sbin /usr/bin /usr/sbin /usr/games /usr/local/bin
/usr/bin/redshiftgui
/usr/bin/redshiftgui: /usr/lib64/libcurl.so.4: version `CURL_OPENSSL_3' not found (required by /usr/bin/redshiftgui)
libcurl.so.4 (CURL_OPENSSL_3) => not found
Notice that there are 2 lots of libcurl in the .iso - in both /usr/lib and /usr/lib/redshiftgui - with slightly different versions
Cheers
peebee
Posted: Sat 04 Apr 2020, 11:15
by 666philb
peebee wrote:I can't see a fix for this in bionic64fix.zip ..... using checkdeps -system:
bionicpup64-8.0
Start: Sat Apr 4 07:49:33 +08 2020
* Checking system dirs: /bin /usr/libexec /sbin /usr/bin /usr/sbin /usr/games /usr/local/bin
/usr/bin/redshiftgui
/usr/bin/redshiftgui: /usr/lib64/libcurl.so.4: version `CURL_OPENSSL_3' not found (required by /usr/bin/redshiftgui)
libcurl.so.4 (CURL_OPENSSL_3) => not found
Notice that there are 2 lots of libcurl in the .iso - in both /usr/lib and /usr/lib/redshiftgui - with slightly different versions
Cheers
peebee
hi peebee,
redshift requires an older libcurl, so it has its own one outside the path and a launch script that points it at it
Code: Select all
export LD_LIBRARY_PATH=/usr/lib/redshiftgui:$LD_LIBRARY_PATH
Posted: Sat 04 Apr 2020, 12:46
by peebee
64-bit LXDE ydrv for BionicPup64 has been added.....
https://sourceforge.net/projects/lxpup/ ... LXDE-ydrv/
The BionicPup ydrv has some bugs to iron out.... PVM crashes when removable media is mounted with pmount - there is a button on the desktop to restart PVM.
PcManFM network access also crashes.
It also required a GLibC update to 2.30.....in the ydrv....
Posted: Sat 04 Apr 2020, 18:51
by rerwin
666philb wrote:Caver69 wrote:Hallos, not sure if i would post this here but there seems to be a networking
bug in the latest release i DLed today the x64 v8.0.
When i run the live environment my network runs ok. When i now install it
(frugal install) and make a save file and reboot i can't get the net interface to come back up.
It uses the ath5k driver for the atheros wlan wich is correct. Any hints?
Caved
hi Caver69
try one of the other network managers, i have to use frisbee for mine to connect
Thank you, Caver69, for reporting your problem with automatic startup of your network connection. I consider myself to be responsible for the three main network managers, so would like to address the issue.
Note that the simple_network_setup (SNS) and network_wizard (NW) packages are not the latest. Please install at least SNS to see if it works in your situation. They are the first two packages available here:
http://www.murga-linux.com/puppy/viewto ... 876#952876
666philb, please consider adding SNS-2.3 and NW-2.1.1 to your BionicPup Updates package.
Caver69, if the latest packages do not resolve the problem, please consider working with me to find the reason, by PM if you care to.
Richard
Thank you
Posted: Tue 07 Apr 2020, 13:09
by gellert234
Hi 666philb,
Thank you that you add my package.
Posted: Wed 08 Apr 2020, 20:01
by linuxcbon
Bionicpup64 8.0 CE
Folder /root/.cache/ gets filled with many files like event-sound-cache.tdb....
Same for folder /root/.dbus/session-bus/ gets filled with many files.
I guess they get created at each bootup, so why not erase them at bootup or use only one ?