Page 64 of 68
Posted: Sun 24 Nov 2019, 10:34
by peebee
Kernel Release: 5.3.13-lxpup64
Build Date: Sun Nov 24 07:42:33 GMT 2019
Needs firmware (e.g. in fdrv)
From Here
Posted: Thu 28 Nov 2019, 20:59
by enrique
peebee my laptop do not populate "/proc/acpi/battery/". So most Battery Tray fail. But the powerapplet_tray in your Bionic-18.05+4 do work but I am looking a 64 bit. Can you tell me where I can get the source of that app you did used. As Always Thanks in advance.
Posted: Fri 29 Nov 2019, 07:34
by peebee
enrique wrote:peebee my laptop do not populate "/proc/acpi/battery/". So most Battery Tray fail. But the powerapplet_tray in your Bionic-18.05+4 do work but I am looking a 64 bit. Can you tell me where I can get the source of that app you did used. As Always Thanks in advance.
Bit OT (Off Topic) - not an LxPupSc question....
http://distro.ibiblio.org/puppylinux/pe ... -i486s.pet
http://distro.ibiblio.org/puppylinux/pe ... x86_64.pet
http://distro.ibiblio.org/puppylinux/so ... .6.tar.bz2
https://github.com/puppylinux-woof-CE/p ... pplet_tray
Posted: Fri 29 Nov 2019, 10:14
by enrique
1rst thank you. 90% of the stuff I had accomplished in this forum is because your help. I know, my apology I like to follow rules. But knowing this is where you spent most of the time, well I thought I could squeeze a question. As respect to you. it will not happen again. Keep the good work.
Posted: Sat 30 Nov 2019, 09:01
by peebee
Slightly experimental - official aufs patches not yet available so some manual intervention needed to get it to build..... new LTS Kernel 5.4
Kernel Release: 5.4.1-lxpup64
Build Date: Sat Nov 30 07:32:46 GMT 2019
Build GCC: 9.2.0
OS Support: GNU/Linux
Architecture: x86_64
SMP Enabled: Yes
Needs firmware (e.g. in fdrv)
From Here
Posted: Sun 01 Dec 2019, 00:02
by Marv
Kernel Release: 5.4.1-lxpup64 tested in LxPupSc 19.09 +6 on the Fujitsu S761 hardware detailed above. Frugal Grub4Dos install in my 'Experimental' directory on SSD. Booted first as pristine and set up timezone, SNS connection, touchpad configuration etc. Savefile created and reboot went fine. Dmesg checks, resource use at idle, microcode early loading, video FPS, suspend and resume all OK. No changes from the 5.3.12 kernel (I skipped 5.3.13). Then rebooted using my scrubbed savefile from 19.09 +6 with the 5.3.12 kernel. Nice clean boot, all tests OK as above. Posting from that install in Slimjet 24.0.5.0 run-as-spot from SFS now. Just fed it Leonard Cohens "Thanks for the dance" CD and it seems happy with that. CD loaded>dialog box>play with Pmusic as expected. No DVDs yet.
Cheers,
Thanks,
Posted: Sun 01 Dec 2019, 19:13
by peebee
19.09+7 is available - see posts #1 and #2
Woof-CE updates & Slackware Current updates
Posted: Wed 04 Dec 2019, 11:06
by peebee
There appear to be some keyboard problems (with some hardware) with 19.09+7 .... apologies
If you are seeing problems like keys mapped incorrectly or country settings not being permanent please convert your 19.09+7 iso to an 19.09+7X iso with the:
19.09+7 to 7X delta
Similar deltas for LxPupSc64 and ScPup32 and ScPup64 are available.
Posted: Thu 05 Dec 2019, 08:40
by peebee
Kernel Release: 5.4.2-lxpup64
Build Date: Thu Dec 5 07:19:35 GMT 2019
"Unofficlal" aufs patches...
Needs firmware (e.g. in fdrv)
From Here
Posted: Sat 07 Dec 2019, 15:18
by Marv
Kernel Release: 5.4.2-lxpup64 swapped into LxPupSc 19.09 +7+ on the i5 based Fujitsu S761 laptop. All my usual system tests fine, two days of light normal use also fine. Basically nothing to report going from 5.4.1 to 5.4.2.
Thanks,
Posted: Fri 13 Dec 2019, 16:21
by peebee
Kernel Release: 5.4.3-lxpup64
Build Date: Fri Dec 13 15:15:02 GMT 2019
"Unofficlal" aufs patches...
Needs firmware (e.g. in fdrv)
From Here
Posted: Wed 18 Dec 2019, 08:41
by peebee
Kernel Release: 5.4.4-lxpup64
Build Date: Wed Dec 18 07:23:07 GMT 2019
"Unofficlal" aufs patches...
Needs firmware (e.g. in fdrv)
From Here
Posted: Wed 18 Dec 2019, 21:13
by Marv
Kernel Release: 5.4.4-lxpup64 swapped into my frugal Grub4Dos install of LxPupSc 19.09 +7+ to SSD on my Fujitsu S761 laptop. Clean boot, all usual system checks look good. Video speed, SSD/memory throughput, and idle resource use pretty much unchanged from the 5.4.2 kernel. Microde early loading works, mitigation is:
Code: Select all
itlb_multihit:KVM: Vulnerable
l1tf:Mitigation: PTE Inversion
mds:Mitigation: Clear CPU buffers; SMT vulnerable
meltdown:Mitigation: PTI
spec_store_bypass:Mitigation: Speculative Store Bypass disabled via prctl and seccomp
swapgs barriers and __user pointer sanitization
spectre_v2:Mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB filling
tsx_async_abort:Not affected
I checked microcode quite recently and there was no update for the Sandy Bridge CPU in that intel package. No multimedia checks as of yet.
Daily use for now. Posting from Slimjet 24.0.5.0 run-as-spot from SFS.
Cheers,
Posted: Thu 19 Dec 2019, 08:52
by peebee
Kernel Release: 5.4.5-lxpup64
Build Date: Thu Dec 19 07:26:07 GMT 2019
Posted: Sat 21 Dec 2019, 19:24
by peebee
Kernel Release: 5.4.6-lxpup64
Build Date: Sat Dec 21 17:06:21 GMT 2019
Posted: Sun 22 Dec 2019, 23:44
by Marv
Kernel 5.4.4 bumped to 5.4.6 in my install detailed 2 posts up. No hitches or glitches noted. As there, all system checks good and daily use fine to date. Mitigations unchanged from 5.4.4.
Thanks,
Posted: Wed 01 Jan 2020, 09:22
by peebee
New decade - new version - kernel update - new default "look"
BUILD_FROM_WOOF='testing;7890189c5;2019-12-28 08:51:15 +0100'
Slackware Current=Sat Dec 28 20:25:38 UTC 2019
64bit kernel 5.4.6
18badf7126c0a5ccd738265066d01179
LxPupSc-20.01+0-T-k64.iso
Delta from 19.09+0
devx, kernel sources and headers, 64-bit compatibility, LXQt ydrv addon
Posted: Wed 01 Jan 2020, 11:13
by peebee
Already...........
aufs-5.4 has been released........
Kernel Release: 5.4.7-lxpup64
Build Date: Wed Jan 1 07:36:17 GMT 2020
Posted: Thu 02 Jan 2020, 02:17
by Marv
As with the 64b LxPupSc, LxPupSc-20.01+0-T-k64 installed to my Fujitsu S761, both as a pristine install, up through setting up timezones, firewall, SNS connection, touchpad configuration, adding in rightclicks and desktop drive icons from the options tab in Change Appearance; and as an update to my 19.09 +7+ frugal Grub4Dos install to SSD on the Fujitsu. Boot, system checks, video speed, mem/SSD throughput all good and unchanged in both the pristine install and the update. Posting from QtWebBrowser in the pristine install now. Fresh savefile created and tested with a reboot. The 32b Desktop Drive icon pet installed correctly in the 32b pristine and the previously installed one in the 32b update also worked correctly. No multimedia tests in either the 64b or 32b as yet. So far so good this year on this one:)
Cheers,
Posted: Sun 05 Jan 2020, 08:38
by peebee
Kernel Release: 5.4.8-lxpup64
Build Date: Sun Jan 5 07:22:22 GMT 2020