Wine - run Windows programs in Linux

Message

FeodorF · #41 Post by **FeodorF** » Tue 15 Apr 2014, 19:25

If you are into music and notes you might find this piece of software very useful.

http://musescore.org/en/download/musescore.exe File size: 37 MB (Wind...)

http://musescore.org/en/download (Linux/Apple/Wind...)

http://musescore.org/en/download-handbook (PDF Handbook)

FeodorF · #42 Post by **FeodorF** » Wed 16 Apr 2014, 01:25

MatheGrafix 10.2 is a plott program for geometry, 3D geometry, fractals and functions.

Home: http://mathegrafix.org/

Two versions - you decide: http://mathegrafix.org/download/

I've tested with this one: http://mathegrafix.de/prog/setup_mathegrafix102e.zip

FeodorF · #43 Post by **FeodorF** » Wed 16 Apr 2014, 02:06

Copy 4.0.1 of Open Office installs fine to Puppy Linux. Runs fine too. Version 4.10 leads to the wrong directory for the installation. They need to fix the installation directory entry to capital letters. (I think somebody should tell them!)

You can download from there:

http://www.heise.de/download/openoffice ... 69375.html

http://www.heise.de/download/c807067570 ... 01535.html File size: 156 MB

If You need an other language - load the add on from the source.

http://sourceforge.net/projects/openoff ... e/download] File size: 156 MB

FeodorF · #44 Post by **FeodorF** » Thu 17 Apr 2014, 12:59

GSview 5.0 and it's features are described here: http://pages.cs.wisc.edu/~ghost/gsview/get50.htm

Download Ghostscript 9.14 for Wind...(32bit) from here: http://downloads.ghostscript.com/public/gs914w32.exe

Download GSview 5.0 for Wind...(32bit) from here:http://pages.cs.wisc.edu/~ghost/gsview/ ... v50w32.exe

Setup steps:
========
a) install Ghostscript 9.14
b) install GSview 5.0

Now you can start GSview 5.0 - pick an pdf file >v1.2 and convert it to an v1.2 pdf file. As soon as you have saved this file you'll be able to print it with CUPS without loosing characters or pages.

FeodorF · #45 Post by **FeodorF** » Fri 18 Apr 2014, 11:02

Just a proof of concept - running the 'SeaMonkey.exe' as Wine application.

Notice: SeaMonkey.exe will a always run on top layer.

You can download your .exe here: http://www.seamonkey-project.org/releases/

Feel free to try other browsers too.

FeodorF · #46 Post by **FeodorF** » Fri 18 Apr 2014, 11:38

This CAD program can be used to develop professional PCB's (boards).

You can download it here: http://www.cadsoftusa.com/download-eagl ... en&lang=en

Limitations: With 'freeware' licensing you can only use a board size of 10 cm x 8 cm.

Read here: http://www.cadsoftusa.com/download-eagl ... anguage=en

This board is within the limits. Developed by: http://elmicro.com/en/kit12.html

FeodorF · #47 Post by **FeodorF** » Sat 19 Apr 2014, 00:31

Stellarium is a free GPL software which renders realistic skies in real time with OpenGL. With Stellarium, you really see what you can see with your eyes, binoculars or a small telescope. Stellarium is also used in real planetariums.

Homepage: http://stellarium.sourceforge.net/

Download (win32) here: http://sourceforge.net/projects/stellar ... e/download

Little help: F1-Help , F2-Configuration Window , F6-Location Window , z-Azimuthal grid , CTRL+Q-Quit , Mouse: Left-Info on , Right-Info off

Stellarium FAQ's & bug reports: https://launchpad.net/stellarium

FeodorF · #48 Post by **FeodorF** » Sat 19 Apr 2014, 12:04

I would strongly suggest not to mix up Win/XP and Win7 applications while running Wine.

How to do a Windows 7 setup for Wine?
=========================

Follow the same steps as described on page 3 of this post.
At 'Menu->Utility->Wine Config' choose Windows 7 and click Ok. From there on you follow the same steps.

How to swap from Wine Win/XP to Wine Windows 7 ?
================================

If you already have Wine installed on '/mnt/home/ wine' (f.e. sda1) rename the folder to wine-XP or wine_XP.
Now go to '/root' and delete the link '.wine'. Click on 'Menu->Utility->Wine Config' and choose Windows 7.
Go to '/root' rename '.wine' to 'wine-Win7 or wine_Win7' and move it to '/mnt/home'.
At last step you provide a link from your '/mnt/home/ wine-Win7' folder to '/root' calling it '/root .wine'.

To revert everything just delete your .wine link and discard the .wine file being produced by your new 'Menu->Utility->Wine Config' setup.
Now pick the folder you need from '/mnt/home ...' as your '/root .wine' link.

FeodorF · #49 Post by **FeodorF** » Sat 19 Apr 2014, 12:45

This one needs a 'Wine Windows 7' setup!

Project 'Soundcard Oscilloscope': http://www.zeitnitz.de/Christian/scope_en?mid=4.01

Download from here Windows 7 (32-bit): http://www.zeitnitz.eu/scope/scope_141.exe

English pdf manual: http://www.zeitnitz.eu/scope/manual_scope_v141.pdf Please have a look at the manual first!

Homepage: http://www.zeitnitz.de/Christian/scope

FeodorF · #50 Post by **FeodorF** » Tue 22 Apr 2014, 20:40

Yes, you are right - I had missed the Adobe Flash Player part. There we go now.

How to install the Adobe Flash Player 13.0.0.182 for Wine version 1.7.16?
==============================================
1) start your Puppy Linux SeaMonkey/Firefox browser and download the Flash Player Installer for Windows from here:
--> http://fpdownload.macromedia.com/get/fl ... player.exe File size: 17.1 MB
2) save this file to drive c: of your Wine installation
3) install your windows browser to Wine
4) click on the Flash Player Installer.exe to execute the install process
5) go to 'Menu->Utility->Wine Control Panel' - the Flash Player icon will tell you that the installation went well
6) start your Wine internet browser and check if Flash works on youtube
7) please don't forget to power off your PC to restart

How to check if your Flash Player works?
=========================
go right there and check: http://www.youtube.com/watch?v=glfgb3vW ... 8mLjI4ofhA

How to check what version is installed?
========================
check right here: http://www.adobe.com/software/flash/about/

That's it.
Have fun!

version2013 · #51 Post by **version2013** » Thu 24 Apr 2014, 03:06

my attempt at compiling wine-1.7.17

wine-1.7.17-i486_v1.1.pet _______ puppy 431 | stripped=true | mirrors
wine-1.7.17-i486_v1.2.pet _______ puppy 431 | stripped=false | mirrors
wine-1.7.17-i486_v2.1.pet _______ racy puppy 5.5 | stripped=true | mirrors
wine-1.7.17-i486_v2.2.pet _______ racy puppy 5.5 | stripped=false | mirrors
wine_DEV-1.7.17-i486_v1.pet ____ puppy 431 | mirrors
wine_DEV-1.7.17-i486_v2.pet ____ racy puppy 5.5 | mirrors
wine_DOC-1.7.17-i486.pet _______ mirrors
wine_extras-v2.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ mirrors

If you are not going to submit bug reports to WineHQ, I recommend packages that are 'stripped=true'
If you are going to submit bug reports to WineHQ, I recommend packages that are 'stripped=false'
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine. [references]

The first post [>] has links to:
sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------
puppy 431 ->

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
_________ mirrors _________
/distro/4.3__1/puppies-431.1-main-Xserver.iso
/distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.