Minnesota wrote:I am sure you know 11.0 will not boot on a newer machine without a IDE drive. attached file of the screen.
Boot with Xvesa on older IBM R52, no sound. Will find an older box to give it a shot. HAY... Bubbles is back
>
How are you doing?
Frugal install of Top 11 booting just fine on this box with 2 sata hdd and a sata optical drive.Nothing ide.
Booted cd,ran installer,edited menu.lst and rebooted.
Code: Select all
-Computer-
Processor : AMD Athlon(tm) 64 X2 Dual Core Processor 5200+
Memory : 3632MB (370MB used)
Operating System : Puppy Linux 0.21
User Name : root (root)
Date/Time : Mon 05 Sep 2016 06:35:42 PM PUP
-Display-
Resolution : 1600x1200 pixels
OpenGL Renderer : Unknown
X11 Vendor : (null)
-Multimedia-
-Input Devices-
AT Translated Set 2 keyboard
ImPS/2 Logitech Wheel Mouse
-Printers (CUPS)-
CUPS-PDF : <i>Default</i>
-SCSI Disks-
HL-DT-ST DVDRAM GH22NS50
ATA WDC WD10EZEX-00R
ATA ST3250318AS
Generic- Compact Flash
Generic- SM/xD-Picture
Generic- SD/MMC
Generic- MS/MS-Pro
Code: Select all
sh-3.00# dmesg | grep -i SATA
sata_nv 0000:00:08.0: version 2.0
ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD082 bmdma 0xC880 irq 10
ata2: SATA max UDMA/133 cmd 0xD000 ctl 0xCC02 bmdma 0xC888 irq 10
scsi0 : sata_nv
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
scsi1 : sata_nv
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA max UDMA/133 cmd 0xC800 ctl 0xC482 bmdma 0xC000 irq 10
ata4: SATA max UDMA/133 cmd 0xC400 ctl 0xC082 bmdma 0xC008 irq 10
scsi2 : sata_nv
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 300)
sh-3.00#
Code: Select all
sh-3.00# hdparm -I /dev/sd? | grep 'sd.\|ATA'
/dev/sda:
ATA device, with non-removable media
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
/dev/sdb:
ATA device, with non-removable media
HDIO_DRIVE_CMD(identify) failed: Invalid argument
HDIO_DRIVE_CMD(identify) failed: Invalid argument
HDIO_DRIVE_CMD(identify) failed: Invalid argument
HDIO_DRIVE_CMD(identify) failed: Invalid argument
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
/dev/sdc:
/dev/sdd:
/dev/sde:
/dev/sdf:
sh-3.00#
Code: Select all
sh-3.00# free
total used free shared buffers
Mem: 3632288 506072 3126216 0 45936
Swap: 6246392 0 6246392
Total: 9878680 506072 9372608
sh-3.00#
Code: Select all
title Puppy Linux 214 frugal
rootnoverify (hd0,2)
kernel /pup11/vmlinuz root=/dev/ram0 pmedia=satahd psubdir=pup11
initrd /pup11/initrd.gz