dict just needs one file; ~/.dictrcL18L wrote:Specify a dict server please.Code: Select all
'dict.conf' doesn't specify any dict server
Then add this to it;
Code: Select all
server dict.org
dict just needs one file; ~/.dictrcL18L wrote:Specify a dict server please.Code: Select all
'dict.conf' doesn't specify any dict server
Code: Select all
server dict.org
Code: Select all
locate
Code: Select all
mkdir -p /var/state
Code: Select all
updatedb
Code: Select all
i7z DEBUG: guessing Nehalem ...
Socket [0] - [physical cores=2, logical cores=4, max online cores ever=2]
TURBO DISABLED on 2 Cores, Hyper Threading ON
True Frequency 3498.00 MHz (99.94 x [35])
Max TURBO Multiplier (if Enabled) with 1/2/3/4 Cores is 35x/35x/35x/35x
Current Frequency 800.60 MHz [99.94 x 8.01] (Max of below)
Core [core-id] :Actual Freq (Mult.) C0% Halt(C1)% C3 % C6 %
Core 1 [0]: 799.59 (8.00x) 4.1 97.1 1 1
Core 2 [1]: 800.60 (8.01x) 1 99.8 0 0
?????tigs wrote:The second problem is the printer setup. By clicking the /control pannel/system/CUPS manage printing, a popup windows asks me if i need help adding a printer. Clicking "yes" or "no" will bring both me to the browser home page. Both the 621 and this RC are the same.
i just tried again. it brought me to: file:///usr/share/doc/home.htm. either yes or no. I was using the 621 and now the RC1.When I click "yes", it takes me to here. If I click "no", it loads the CUPS web interface at http://localhost:631.
i did not do anything to the browser, the stock seamonkey.rcrsn51 wrote:Have you changed browsers? I checked again in 630 RC1 with the default Seamonkey and it behaved exactly as expected.
tigs wrote:
Thanks to Kirk for creating the Frisbee.pet. It worked like a charm.
It is not in the repo, but in one of the post. I wish it is included in the repo.Hi, tigs
Could you please help me find this Frisbee pet
I did not find it in the repos...
Sage, some of the older Nvidea boards can be problematic. I found a thread that suggests a nouveau noaccel=1 parameter which also works for Precise Puppies. My MX440 will eventually freeze and require reboot without this. I always type it in at the boot options.Sage wrote:Interesting boot phenomenon. nV MX440 video card. Black screen. Ctrl-Alt-Bkspce produces terminal screen behind which is correct desktop. Exit terminal and everything works. Not seen this variant before. Incomers might not know the k/b option? Simple fix?
Code: Select all
#!/bin/dash
# Login Manager - sets login mode for Fatdog
#
# Copyright (C) James Budiono 2012, 2013
# License: GNU GPL Version 3 or later
#
# Note: must run as root
#
#131108 L18L internationalisation, introducing MODE_TEXT and NEWMODE_TEXT
. gettext.sh
export OUTPUT_CHARSET=UTF-8
export TEXTDOMAIN=fatdog64
### configuration
APPTITLE="$(gettext 'Fatdog64 Login Manager')"
######### helpers ########
add_logout_text() {
# change "restart X" in openbox
for p in /etc/xdg/openbox/menu.xml $USERHOME/.config/openbox/menu.xml; do
sed -i -e 's/label="Restart X server"/label="Logout"/; s|<execute>restartwm</execute>|<execute>wmexit logout</execute>|' $p
done
# change "restart X" in lxpanel
for p in /usr/share/lxpanel/profile/default/panels/panel $USERHOME/.config/lxpanel/default/panels/panel; do
sed -i -e 's/name=Quit X server/name=Logout/; s/wmexit terminal/wmexit logout/' $p
done
# change "restart X" in jwm
sed -i -e 's/-Exit to prompt/-Logout/; s/wmexit terminal/wmexit logout/' /usr/bin/jwm_menu_create
}
remove_logout_text() {
# undo logout openbox menu
for p in /etc/xdg/openbox/menu.xml $USERHOME/.config/openbox/menu.xml; do
sed -i -e 's/label="Logout"/label="Restart X server"/; s|<execute>wmexit logout</execute>|<execute>restartwm</execute>|' $p
done
# undo logout lxpanel menu
for p in /usr/share/lxpanel/profile/default/panels/panel $USERHOME/.config/lxpanel/default/panels/panel; do
sed -i -e 's/name=Logout/name=Quit X server/; s/wmexit logout/wmexit terminal/' $p
done
# undo logout jwm menu
sed -i -e 's/-Logout/-Exit to prompt/; s/wmexit logout/wmexit terminal/' /usr/bin/jwm_menu_create
}
enable_autologin() {
sed -i -e '/^tty1:/ s|respawn:.*|respawn:/sbin/getty -n -l /bin/autologin 38400 tty1|' /etc/inittab
}
disable_autologin() {
sed -i -e '/^tty1:/ s|respawn:.*|respawn:/sbin/getty 38400 tty1|' /etc/inittab
}
remove_slim() {
sed -i -e '\_/usr/bin/slim_ d' /etc/rc.d/rc.local
}
add_slim() {
remove_slim # prevent duplicates
echo '/usr/bin/slim -d' >> /etc/rc.d/rc.local
}
get_current_login_mode() {
MODE="console" && MODE_TEXT=$(gettext 'console')
grep -q /usr/bin/slim /etc/rc.d/rc.local && MODE="graphical" && MODE_TEXT=$(gettext 'graphical')
grep -q autologin /etc/inittab && MODE="autologin" && MODE_TEXT=$(gettext 'autologin')
}
#$1-mode
set_login_mode() {
case $1 in
console) disable_autologin; add_logout_text; remove_slim; NEWMODE_TEXT="$(gettext 'console')" ;;
graphical) disable_autologin; add_logout_text; add_slim ; NEWMODE_TEXT="$(gettext 'graphical')" ;;
autologin) enable_autologin; remove_logout_text; remove_slim ; NEWMODE_TEXT="$(gettext 'autologin')" ;;
esac
}
########### main #############
export USERHOME=$(awk -F: -v user=$USER '$1==user {print $6}' /etc/passwd) # the user's home
[ $(id -u) -ne 0 ] && exec gtksu "$APPTITLE" "$0" "$@"
get_current_login_mode # return MODE
status_console=off status_graphical=off status_autologin=off
eval status_$MODE=on
if NEWMODE=$(Xdialog --stdout --title "$APPTITLE" --no-tags --radiolist "$(eval_gettext 'Current login mode is: $MODE_TEXT.')
$(gettext 'Please choose the new login mode.')
$(gettext 'Takes effect at next boot.')" 0 0 0 \
autologin "$(gettext 'Autologin - no password necessary')" $status_autologin \
graphical "$(gettext 'Graphical login')" $status_graphical \
console "$(gettext 'Console login')" $status_console); then
if [ $NEWMODE != $MODE ]; then
set_login_mode $NEWMODE
Xdialog --title "$APPTITLE" --msgbox "`eval_gettext "Login mode has been changed to '\\\$NEWMODE_TEXT' and will take effect at next boot."`" 0 0 10000
[ $MODE = "autologin" ] && echo -e '\a' > /dev/console &&
Xdialog --title "$(gettext 'Warning')" --msgbox "$(gettext 'You are disabling autologin.
At next boot, you are required to provide a password before you can login to the system.')
$(gettext 'Make sure you know the password for the user you are going to use, and the root password too.
If you do not know, you can set the passwords now using the User Manager from Control Panel.')
$(gettext 'If you have not changed anything, the default root password is woofwoof.')" 0 0 90000
exit
fi
fi
Xdialog --title "$APPTITLE" --msgbox "$(eval_gettext 'Nothing is changed. The login mode stays as $MODE_TEXT')". 0 0 10000
Code: Select all
# change "restart X" in jwm
sed -i -e 's/-Exit to prompt/-Logout/; s/wmexit terminal/wmexit logout/' /usr/bin/jwm_menu_create
Code: Select all
[Desktop Entry]
Encoding=UTF-8
Name[de]=Hardware-Uhr-Einstellung
Name=Configure Hardware Clock
Icon=mini-clock.xpm
Comment[de]=Konfiguration der Hardware-Uhr in UTC oder lokaler Zeit
Comment=Configure Hardware Clock to run in UTC or localtime
Exec=hwclockconf.sh
Terminal=false
Type=Application
Categories=X-SetupWizard
GenericName=Configure Hardware Clock
NoDisplay=true