(old)Puppy Linux Discussion Forum

Posted: **Fri 01 Jun 2018, 06:44**

Peebee, I only do frugal installs. I am going to try it again and see what happens. I really like it and see that it is snappy and responsive. The sanity check failure was most likely something that I was not doing correctly. Thanks for responding. Keep up the great work.

Posted: **Sat 09 Jun 2018, 14:37**

8b3ebde7d31a37b5a3be8779d204e373 LxPupBionic-18.05+4.iso

{delta}

based on UPupBB-18.05+4

Posted: **Tue 12 Jun 2018, 03:28**

peebee wrote:8b3ebde7d31a37b5a3be8779d204e373 LxPupBionic-18.05+4.iso

Played around with this a bit last night - looking great, as usual, peebee!!

One thing (I may have broken myself) - TAS not working, I believe it was ffmpeg complaining about missing libav.so's (iirc) - added the relevant symlinks, and ended up at some kind of libavcodec execution error - where I gave up. Anybody else see this - or was it just me and my tossing everything at it...?

Thanks, peebee!!

Bob

Posted: **Tue 12 Jun 2018, 07:45**

Moat wrote:TAS not working

Seems OK here......

Posted: **Tue 12 Jun 2018, 22:09**

peebee wrote:Seems OK here......

Yup, you're right - working here now after a pristine boot. Obviously something I installed (probably an older Audacity .pet I had lying around...) broke ffmpeg/libav. All good... sorry, peebee!

Bob

Posted: **Mon 16 Jul 2018, 10:29**

"The Puppy equivalent of Lubuntu...." - >275,000 downloads from 183 countries as of 19-mar-2018
Bravo ! that is where to look... distrowath count only click by an IP
Linux column and Windows columns. Windows are supposed newbies to Puppy, else they would have used Linux to get LxPup
French Franc zone still white zone. Not surprising.

Posted: **Mon 16 Jul 2018, 11:58**

e453a3ff52bb72331325f0766b6647c2 LxPupBionic-18.05+8.iso

{delta}

based on UPupBB-18.05+8

Posted: **Mon 16 Jul 2018, 17:10**

Both LxPupBionic and upupbb on the Fujitsu S761 i5 laptop updated to +8 using the deltas. md5sums all ok, no issues at all noted in either. upupbb with my pcmanfm and trash mods slightly ahead in the kennel this week

I am continuing to use your 4.17.6 64b kernel & Slimjet 18.0.5.0 run-as-spot from SFS in both. I haven't dipped a toe into gyros overlayfs as I am a diehard savefile guy and as best I understand, it's savefolder only.

Thanks,

Posted: **Mon 16 Jul 2018, 23:18**

Marv wrote: I haven't dipped a toe into gyros overlayfs as I am a diehard savefile guy and as best I understand, it's savefolder only.

Me as well. Fingers crossed it doesn't find it's way into default WoofCE puppies until savefile support were to be fully implemented! Hopefully gyro has enough interest to make that happen some day...

Bob

Posted: **Mon 30 Jul 2018, 04:34**

Hi peebee,

I installed LxPrecisePup15091 downloaded from
http://lx-pup.weebly.com/upup-precise.html

My understanding is that this has savefolder 'enhancement' incorporated.
Is this correct?

If so, unless i missed a step, I found that savefolder does not work.
Please refer to link below for details of what I did.
http://www.murga-linux.com/puppy/viewto ... 8&start=14
http://www.murga-linux.com/puppy/viewto ... 58&start=1

Thank you.

Posted: **Mon 30 Jul 2018, 11:19**

dcung wrote:Hi peebee,

I installed LxPrecisePup15091 downloaded from
http://lx-pup.weebly.com/upup-precise.html

My understanding is that this has savefolder 'enhancement' incorporated.
Is this correct?

If so, unless i missed a step, I found that savefolder does not work.
Please refer to link below for details of what I did.
http://www.murga-linux.com/puppy/viewto ... 8&start=14
http://www.murga-linux.com/puppy/viewto ... 58&start=1

Thank you.

Savefolders are not the real problem....
See:
http://murga-linux.com/puppy/viewtopic. ... 09#1000609

Posted: **Wed 15 Aug 2018, 20:29**

Hi all,

i'am using LxPup-Sc - 18.06 with Kernel: Linux 4.16.13-lxpup64 (x86_64)

I want to install Virutalbox i don't find it in the Pup Control / Software / SFSget ?

Posted: **Thu 16 Aug 2018, 06:32**

jplt_bis wrote:Hi all,

i'am using LxPup-Sc - 18.06 with Kernel: Linux 4.16.13-lxpup64 (x86_64)

I want to install Virutalbox i don't find it in the Pup Control / Software / SFSget ?

sfsget probably shouldn't be in the build as it is accessing a repo that is not updated and is very out of date....

I am not aware of a VirtualBox .sfs I'm afraid - and a quick forum search has failed to find a recent thread - although there are old threads.

There are Slackware packages but they are kernel specific....and the latest isn't there for 32-bit Slackware-14.2

I suspect your request is not possible.

Posted: **Thu 16 Aug 2018, 16:36**

Ok thanks peebee.

Posted: **Sun 16 Sep 2018, 09:20**

ff110f7173f3a4e618a67c43c70d5140 LxPupBionic-18.05+12.iso

{delta}

based on UPupBB-18.05+12

Posted: **Sun 16 Sep 2018, 15:20**

LxPupBionic 18.05 +8 running the 4.17.8 64b kernel updated to 18.05 +12, keeping the 4.17.8 64b kernel (used for mitigations) on the computer below using the delta. The standard Grub4Dos frugal install to SSD.

Code: Select all

# inxi -bw
System:    Host: puppypc6521 Kernel: 4.18.7-lxpup64 x86_64 bits: 64 Desktop: LXDE (Openbox 3.6.1)
           Distro: UPupBB 18.05
Machine:   Device: laptop System: FUJITSU product: LIFEBOOK S761 serial: R2500459
           Mobo: FUJITSU model: FJNB225 serial: N/A
           UEFI [Legacy]: FUJITSU // Phoenix v: Version 1.17 date: 03/14/2012
Battery    CMB1: charge: 47.4 Wh 92.0% condition: 51.5/62.2 Wh (83%)
CPU:       Dual core Intel Core i5-2520M (-HT-MCP-) speed/max: 813/3200 MHz
Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
           Display Server: X.Org 1.19.6 drivers: modesetting (unloaded: fbdev,vesa) Resolution: 1366x768@60.00hz
           OpenGL: renderer: Mesa DRI Intel Sandybridge Mobile x86/MMX/SSE2 version: 3.3 Mesa 18.0.5
Network:   Card: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) driver: ath9k
Drives:    HDD Total Size: 120.0GB (40.4% used)
Weather:   Conditions: 66 F (19 C) - Clear Time: September 16, 9:07 AM CDT
Info:      Processes: 152 Uptime: 2 min Memory: 206.6/4787.8MB Client: Shell (bash) inxi: 2.3.40

md5sum ok, video frame rate, lxtask reported cpu use at idle (1%) and memory use at idle (209 MB) both fine. Dmesg pretty clean. Regulatory firmware loading nag fixed by installing regulatory db as in upupbb and upupcc, the pet I use is attached below. Sorry I haven't chased the backend modprobe failures at all yet or looked at the stock kernel/pristine install wrt that yet. Everything concerning disks and media seems to be working perfectly.

Code: Select all

# dmesg | grep -i failed
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
udevd[1095]: Process '/sbin/pup_event_backend_modprobe' failed with exit code 1.
udevd[931]: Process '/sbin/pup_event_backend_modprobe' failed with exit code 1.
udevd[1505]: Process '/sbin/pup_event_backend_modprobe' failed with exit code 1.
# dmesg | grep -i warning
Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
random: 2 urandom warning(s) missed due to ratelimiting
#

Intel_pstate 'powersave' and acpi_cpufreq 'conservative' governors compared. Both work about equally well on this hardware with this kernel.

No CD/DVD to test, Sylpheed and Slimjet 18.0.5.0 with profiles symlinked to the EXT2 data partition as usual. Shutdown and reboot clean. Remains a very solid pup with perfect lxde/pcmanfm integration IMO.

Thanks,

Posted: **Mon 17 Sep 2018, 06:26**

Hi @Marv

regulatory.db is included in all the builds HOWEVER 3builddistro-Z deletes /lib/firmware and all its contents assuming that zdrv (or fdrv) will provide.

Needs a woof-ce change to fix - https://github.com/puppylinux-woof-CE/w ... ssues/1248

In the meantime, I do have a kludge which will fix new versions pro-tem.

Thanks for reporting.

Posted: **Sat 27 Oct 2018, 16:03**

9529ebb8edd3fae3d70923f5983f86ba LxPupBionic-18.05+16.iso

{delta}

based on UPupBB-18.05+16

Posted: **Sat 10 Nov 2018, 07:52**

peebee wrote:LxPupBionic-18.05+16.iso

Marv wrote:Remains a very solid pup with perfect lxde/pcmanfm integration IMO.

I so very agree - simply fantastic Puppy, peebee! Everything working OOTB just as it should, with all of your great polish/tweaks/feature integration/etc - couldn't wish for anything more.

Code: Select all

System:    Host: puppypc2850 Kernel: 4.9.96-lxpup-32-pae i686 bits: 32
           Desktop: LXDE (Openbox 3.6.1) Distro: UPupBB 18.05
Machine:   Device: desktop System: Dell product: OptiPlex 380 serial: 62B2LN1
           Mobo: Dell model: 0HN7XN v: A01 serial: ..CN1374007U08KF.
           BIOS: Dell v: A01 date: 03/11/2010
CPU:       Dual core Pentium E5400 (-MCP-) cache: 2048 KB
           clock speeds: max: 2700 MHz 1: 2000 MHz 2: 2000 MHz
Graphics:  Card: Intel 4 Series Integrated Graphics Controller
           Display Server: X.Org 1.19.6
           drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1280x1024@60.02hz
           OpenGL: renderer: Mesa DRI Intel G41 x86/MMX/SSE2
           version: 2.1 Mesa 18.0.5
Audio:     Card Intel NM10/ICH7 Family High Def. Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.9.96-lxpup-32-pae
Network:   Card-1: Broadcom Limited NetLink BCM57780 Gigabit Ethernet PCIe
           driver: tg3
           IF: enp2s0 state: down mac: f0:4d:a2:24:1c:26
           Card-2: NetGear WNA1100 Wireless-N 150 [Atheros AR9271]
           driver: ath9k_htc
           IF: wlx08bd437baf6a state: N/A mac: N/A
Drives:    HDD Total Size: NA (-)
           ID-1: /dev/sda model: Hitachi_HDS72101 size: 160.0GB
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 45.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 177 Uptime: 1:34 Memory: 376.8/3936.5MB
           Client: Shell (bash) inxi: 2.3.56

Thanks!

Bob

Posted: **Sat 08 Dec 2018, 11:02**

a15af5b95d6609ed7f124ffe984b1ceb LxPupBionic-18.05+21.iso

{delta}

based on UPupBB-18.05+21

(old)Puppy Linux Discussion Forum

LxPup : a Puppy with LXDE as its desktop environment

Re: Live Mode Only

183 countries as of 19-mar-2018