(old)Puppy Linux Discussion Forum

Posted: **Sun 20 Nov 2011, 23:07**

Dear green_dome,

The wine guys and gals have been busy and 1.3.33 is out: http://www.winehq.org/announce/1.3.33.

Your kind assistance would again......

Many thanks.

With kind regards,
vovchik

Posted: **Mon 21 Nov 2011, 15:43**

Hi Green-dome,

First let me thank you for your wine pets which I use all the time.

My apologies about the following. It is from memory. I intended to post immediately, but got distracted: only remembered when I ran across another post about wine.

I think your latest wine pet may have already solved this problem. But in some of the earlier ones, if you clicked the winetrick's menu link only a notice would appear indicating that it required the install of zenity. Zenity can not be found in any Puppy repo. Googling for it revealed the attached ubuntu deb, which, I think, solved the problem. I don't recall it being specifically limited to Puppies using Ubuntu sources.

Warning: Before installing the deb, note the ambiguity of above statements and create a protected copy of your SaveFile.

mikesLr

Posted: **Thu 01 Dec 2011, 02:57**

my attempt at compiling Wine 1.3.33

Wine 1.3.33_v1
version 1 | stripped=true

Wine 1.3.33_v2
version 2 | stripped=false

md5 | hashdeep

When submitting bug reports to WineHQ, it appears a non stripped Wine provides more information than a stripped Wine.
Non stripped = better for squashing bugs.
[Reference]

-----------------------------------------------------------------------------------------------------------

There are a few scripts that I find useful in creating sfs files.

One is 'pets2sfs'
[forum post] [download] [forum post]

Another is 'createsfs'
[forum post] [download]

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso - [forum post] [mirror 1]
devx_430.sfs - [forum post] [mirror 1]

-----------------------------------------------------------------------------------------------------------

I installed these packages before compiling:

esound-0.2.41-i486.pet [Link]
esound_DEV-0.2.41-i486.pet [Link]
fontconfig-2.7.1-i486-pup4.pet [Link]
fontconfig_DEV-2.7.1-i486-pup4.pet [Link]
gnutls+deps-2.6.6-i486.pet [Link]
gnutls+deps_DEV-2.6.6-i486.pet [Link]
jack-audio-connection-kit-0.116.1-i486.pet [Link]
jack-audio-connection-kit_DEV-0.116.1-i486.pet [Link]
libgphoto2-2.4.6-pup4.pet [Link]
libgphoto2_DEV-2.4.6-pup4.pet [Link]
mpg123-1.12.4.pet [Link]
mpg123_DEV-1.12.4.pet [Link]
openldap-2.4.13-i486.pet [Link]
openldap_DEV-2.4.13-i486.pet [Link]
xorg_xorg_full_dri-7.3.pet [Link]
xorg_xorg_full_dri_DEV-7.3.pet [Link]

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x

Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

For help with Gecko,
http://wiki.winehq.org/Gecko

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h

[Reference]

Posted: **Fri 02 Dec 2011, 21:03**

Dear green_dome,

The Wine guys have just released v. 1.3.4 (http://www.winehq.org/announce/1.3.34). Any chance that you could provide us the pets?

With thanks in advance and kind regards,
vovchik

Posted: **Fri 16 Dec 2011, 02:48**

my attempt at compiling Wine 1.3.34

Wine 1.3.34_v1
version 1 | stripped=true

Wine 1.3.34_v2
version 2 | stripped=false

md5 | hashdeep

When submitting bug reports to WineHQ, it appears a non stripped Wine provides more information than a stripped Wine.
Non stripped = better for squashing bugs.
[Reference]

-----------------------------------------------------------------------------------------------------------

There are a few scripts that I find useful in creating sfs files.

One is 'pets2sfs'
[forum post] [download] [forum post]

Another is 'createsfs'
[forum post] [download]

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso - [forum post] [mirror 1]
devx_430.sfs - [forum post] [mirror 1]

-----------------------------------------------------------------------------------------------------------

I installed these packages before compiling:

esound-0.2.41-i486.pet [Link]
esound_DEV-0.2.41-i486.pet [Link]
fontconfig-2.7.1-i486-pup4.pet [Link]
fontconfig_DEV-2.7.1-i486-pup4.pet [Link]
gnutls+deps-2.6.6-i486.pet [Link]
gnutls+deps_DEV-2.6.6-i486.pet [Link]
jack-audio-connection-kit-0.116.1-i486.pet [Link]
jack-audio-connection-kit_DEV-0.116.1-i486.pet [Link]
libgphoto2-2.4.6-pup4.pet [Link]
libgphoto2_DEV-2.4.6-pup4.pet [Link]
mpg123-1.12.4.pet [Link]
mpg123_DEV-1.12.4.pet [Link]
openldap-2.4.13-i486.pet [Link]
openldap_DEV-2.4.13-i486.pet [Link]
xorg_xorg_full_dri-7.3.pet [Link]
xorg_xorg_full_dri_DEV-7.3.pet [Link]

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x

Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

For help with Gecko,
http://wiki.winehq.org/Gecko

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h

[Reference]

Posted: **Fri 16 Dec 2011, 08:12**

Dear green_dome,

Thanks. As usual, everything works:)

With kind regards,
vovchik

Posted: **Fri 23 Dec 2011, 13:10**

Dear green_dome,

We have a new one: http://www.winehq.org/announce/1.3.35. Any chance?

With kind regards,
vovchik

Posted: **Sun 01 Jan 2012, 13:50**

Dear green_dome,

I know it's New Year's day, so I wish you all the best in the new year. If you get a chance, kindly look at this: http://www.winehq.org/announce/1.3.36. We will, as usual, be grateful for your efforts....

With kind regards,
vovchik

Posted: **Thu 12 Jan 2012, 04:56**

my attempt at compiling Wine 1.3.35

wine-1.3.35_v1
version 1 | stripped=true

wine-1.3.35_v2
version 2 | stripped=false

md5 | hashdeep

When submitting bug reports to WineHQ, it appears a non stripped Wine provides more information than a stripped Wine.
Non stripped = better for squashing bugs.
[Reference]

-----------------------------------------------------------------------------------------------------------

There are a few scripts that I find useful in creating sfs files.

One is 'pets2sfs'
[forum post] [download] [forum post]

Another is 'createsfs'
[forum post] [download]

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso - [forum post] [mirror 1]
devx_430.sfs - [forum post] [mirror 1]

-----------------------------------------------------------------------------------------------------------

I installed these packages before compiling:

esound-0.2.41-i486.pet [Link]
esound_DEV-0.2.41-i486.pet [Link]
fontconfig-2.7.1-i486-pup4.pet [Link]
fontconfig_DEV-2.7.1-i486-pup4.pet [Link]
gnutls+deps-2.6.6-i486.pet [Link]
gnutls+deps_DEV-2.6.6-i486.pet [Link]
jack-audio-connection-kit-0.116.1-i486.pet [Link]
jack-audio-connection-kit_DEV-0.116.1-i486.pet [Link]
libgphoto2-2.4.6-pup4.pet [Link]
libgphoto2_DEV-2.4.6-pup4.pet [Link]
mpg123-1.12.4.pet [Link]
mpg123_DEV-1.12.4.pet [Link]
openldap-2.4.13-i486.pet [Link]
openldap_DEV-2.4.13-i486.pet [Link]
xorg_xorg_full_dri-7.3.pet [Link]
xorg_xorg_full_dri_DEV-7.3.pet [Link]

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x

Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

For help with Gecko,
http://wiki.winehq.org/Gecko

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h

[Reference]

* I have read some comments that stated that too many menu entries are created. I have been thinking of removing the menu entries and just relying on using the terminal to run those items. What are your thoughts?

* I will attempt 1.3.36 tomorrow.

Posted: **Thu 12 Jan 2012, 07:47**

G'day green_dome,

Thanks for continuing to compile the ever-improving wine.

I like the Utility menu options for the various functions within wine being there and as they are.

If any change was needed so the 'Utility' menu box was smaller , I would suggest a separate wine menu/category from within the Utility menu classification.

David S.

Posted: **Fri 13 Jan 2012, 04:03**

my attempt at compiling wine-1.3.36

wine-1.3.36_v1
version 1 | stripped=true

wine-1.3.36_v2
version 2 | stripped=false

md5 | hashdeep

When submitting bug reports to WineHQ, it appears a non stripped Wine provides more information than a stripped Wine.
Non stripped = better for squashing bugs.
[Reference]

-----------------------------------------------------------------------------------------------------------

There are a few scripts that I find useful in creating sfs files.

One is 'pets2sfs'
[forum post] [download] [forum post]

Another is 'createsfs'
[forum post] [download]

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso - [forum post] [mirror 1]
devx_430.sfs - [forum post] [mirror 1]

-----------------------------------------------------------------------------------------------------------

I installed these packages before compiling:

esound-0.2.41-i486.pet [Link]
esound_DEV-0.2.41-i486.pet [Link]
fontconfig-2.7.1-i486-pup4.pet [Link]
fontconfig_DEV-2.7.1-i486-pup4.pet [Link]
gnutls+deps-2.6.6-i486.pet [Link]
gnutls+deps_DEV-2.6.6-i486.pet [Link]
jack-audio-connection-kit-0.116.1-i486.pet [Link]
jack-audio-connection-kit_DEV-0.116.1-i486.pet [Link]
libgphoto2-2.4.6-pup4.pet [Link]
libgphoto2_DEV-2.4.6-pup4.pet [Link]
mpg123-1.12.4.pet [Link]
mpg123_DEV-1.12.4.pet [Link]
openldap-2.4.13-i486.pet [Link]
openldap_DEV-2.4.13-i486.pet [Link]
xorg_xorg_full_dri-7.3.pet [Link]
xorg_xorg_full_dri_DEV-7.3.pet [Link]

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x

Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

For help with Gecko,
http://wiki.winehq.org/Gecko

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h

[Reference]

Posted: **Sat 14 Jan 2012, 04:09**

my attempt at compiling wine-1.3.37

wine-1.3.37_v1
version 1 | stripped=true

wine-1.3.37_v2
version 2 | stripped=false

md5 | hashdeep

When submitting bug reports to WineHQ, it appears a non stripped Wine provides more information than a stripped Wine.
Non stripped = better for squashing bugs.
[Reference]

-----------------------------------------------------------------------------------------------------------

There are a few scripts that I find useful in creating sfs files.

One is 'pets2sfs'
[forum post] [download] [forum post]

Another is 'createsfs'
[forum post] [download]

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso - [forum post] [mirror 1]
devx_430.sfs - [forum post] [mirror 1]

-----------------------------------------------------------------------------------------------------------

I installed these packages before compiling:

esound-0.2.41-i486.pet [Link]
esound_DEV-0.2.41-i486.pet [Link]
fontconfig-2.7.1-i486-pup4.pet [Link]
fontconfig_DEV-2.7.1-i486-pup4.pet [Link]
gnutls+deps-2.6.6-i486.pet [Link]
gnutls+deps_DEV-2.6.6-i486.pet [Link]
jack-audio-connection-kit-0.116.1-i486.pet [Link]
jack-audio-connection-kit_DEV-0.116.1-i486.pet [Link]
libgphoto2-2.4.6-pup4.pet [Link]
libgphoto2_DEV-2.4.6-pup4.pet [Link]
mpg123-1.12.4.pet [Link]
mpg123_DEV-1.12.4.pet [Link]
openldap-2.4.13-i486.pet [Link]
openldap_DEV-2.4.13-i486.pet [Link]
xorg_xorg_full_dri-7.3.pet [Link]
xorg_xorg_full_dri_DEV-7.3.pet [Link]

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x

Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

For help with Gecko,
http://wiki.winehq.org/Gecko

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h

[Reference]

Posted: **Sat 14 Jan 2012, 21:59**

Dear green_dome,

I can't believe how fast you did three versions, including the latest, 1.3.37, which came out yesterday. Great work. The last version works well for me - as did all the others. Thanks.

With kind regards,
vovchik

Posted: **Sun 05 Feb 2012, 01:51**

winehq.org has binary distributions for Debian, SUSE, Mandriva, Slackware, and so forth. Naive question, maybe, so feel free to apply the 2x4 if appropriate - but is there any chance of getting your .pets added to Wine's official binary list? I guess that would entail registering as an official maintainer of Wine for our favorite distro.

Posted: **Mon 20 Feb 2012, 04:30**

placeholder

Posted: **Mon 20 Feb 2012, 04:30**

placeholder

Posted: **Mon 20 Feb 2012, 04:31**

placeholder

Posted: **Mon 20 Feb 2012, 04:48**

my attempt at compiling wine-1.4-rc4

wine-1.4-rc4_v1
version 1 | stripped=true

wine-1.4-rc4_v2
version 2 | stripped=false

md5 | hashdeep

When submitting bug reports to WineHQ, it appears a non stripped Wine provides more information than a stripped Wine.
Non stripped = better for squashing bugs.
[Reference]

-----------------------------------------------------------------------------------------------------------

There are a few scripts that I find useful in creating sfs files.

One is 'pets2sfs'
[forum post] [download] [forum post]

Another is 'createsfs'
[forum post] [download]

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso - [forum post] [mirror 1]
devx_430.sfs - [forum post] [mirror 1]

-----------------------------------------------------------------------------------------------------------

I installed these packages before compiling:

esound-0.2.41-i486.pet [Link]
esound_DEV-0.2.41-i486.pet [Link]
fontconfig-2.7.1-i486-pup4.pet [Link]
fontconfig_DEV-2.7.1-i486-pup4.pet [Link]
gnutls+deps-2.6.6-i486.pet [Link]
gnutls+deps_DEV-2.6.6-i486.pet [Link]
jack-audio-connection-kit-0.116.1-i486.pet [Link]
jack-audio-connection-kit_DEV-0.116.1-i486.pet [Link]
libgphoto2-2.4.6-pup4.pet [Link]
libgphoto2_DEV-2.4.6-pup4.pet [Link]
mpg123-1.12.4.pet [Link]
mpg123_DEV-1.12.4.pet [Link]
openldap-2.4.13-i486.pet [Link]
openldap_DEV-2.4.13-i486.pet [Link]
xorg_xorg_full_dri-7.3.pet [Link]
xorg_xorg_full_dri_DEV-7.3.pet [Link]

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x

Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

For help with Gecko,
http://wiki.winehq.org/Gecko

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h

[Reference]

Posted: **Mon 20 Feb 2012, 10:34**

@gree_dome
Thanks for the update...

Posted: **Tue 21 Feb 2012, 08:01**

Dear green_dome,

Thanks from me, too. Your latest works fine....

With kind regards,
vovchik

(old)Puppy Linux Discussion Forum

Wine

wine 1.3.33 released

Winetrick's GUI requires Zenity

Wine 1.3.33

Wine 1.3.34 now out

Wine 1.3.34

Wine development release 1.3.36 is now available

Wine 1.3.35

menu entries for wine

wine-1.3.36

wine-1.3.37

wine-1.4-rc4