Chinese Language Pets

Message

icake · #561 Post by **icake** » Sun 06 Oct 2019, 23:35

stemsee wrote:hi icake

would consider making a yong package (.sfs) for BionicDog??

Stemsee, if you are referring to bionicpup (rather than bionic dog, which is a debian release), I have made Chinese language pets for the bionicpup32 bit before. Please see my post dated May 31, 2019 on page 37 for more details. Here are the ones for bionicpup64:

666philb has released BionicPup64 8.0 on Sep 18, 2018

More information and forum discussions:
http://murga-linux.com/puppy/viewtopic.php?t=114311

Download:
http://distro.ibiblio.org/puppylinux/puppy-bionic/

I have created 6 half-Chinese language pets for BionicPup64 8.0 :

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-18.0.0.pet (30 mb)

scim Chinese input platform:
scim64_1.4.14-en-zh-bionic-18.0.0.pet (23 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-bionic-18.0.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-bionic-18.0.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-bionic-18.0.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-bionic-18.0.0.pet (9.5 mb)

Plus 2 Chinese language pets for BionicPup64 8.0:
Simplified Chinese:
bionicpup64-8.0-zhcn-18.0.0.pet (3.7 mb)

Traditional Chinese:
bionicpup64-8.0-zhhk-18.0.0.pet (3.6 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in BionicPup64 8.0

(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for BionicPup64 8.0

for more information about the fcitx64 4.2.9 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
for more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

stemsee · #562 Post by **stemsee** » Mon 07 Oct 2019, 19:54

Hi icake

I meant debian'dog' or any of the dogs by fredx, saintless, etp etc!
I tried to install using apt-get but I was not able to invoke the input method even though the tray and menu were there!

thanks for trying though. I will do some other research too.
stemsee

oui · #563 Post by **oui** » Mon 07 Oct 2019, 20:44

icake wrote:The icake language pets use wqy-mircrohei.ttf fonts. I know it can handle both Traditional Chinese and Simplified Chinese but not sure whether it supports Japanese or Korean characters. After a quick search on the web, my view is Pan-CJK or fonts-ttf-wqy-microhei has the best chances to satisfy your needs.

A great "thank you very much" (it will make my Puppy remasters a lot more easy!!!)

icake wrote: fcitx Chinese input platform:
fcitx_4.2.9-en-zh-bionic-18.0.0.pet (30 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-bionic-18.0.0.pet (23 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-bionic-18.0.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-bionic-18.0.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-bionic-18.0.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-bionic-18.0.0.pet (9.5 mb)

To simplify my work, as I write only a bit in far east languages (more to learn them)

and perhaps are more puppyist's in that situation

I use online in my lovely browser (*1 the wonderful site

https://www.inputking.com/

and can forget all the stress to install, set up and care the formal usage difficulties of far east input methods

the only (little) stress is at the side of Linux and Puppy Linux (not able to add them in the list of proposed keyboards (beahbeahbeahbeahbeah Puppy linux! is really poor performance of all developers!)):

add the keyboard layout

US INTL !

but

Code: Select all

# setxkbmap us intl

works in about all linux distros (*2 ! Hurrah!

excepted in the Chinese one: Deepin ! Really fun as it is the international most known Chinese Linux! In Deepin, if you start with or add US INTL using setxkbmap, as soon you use the official deepin integrated console or the official deepin integrated file manager, the setting of us intl is lerased and you have reenter in the console and reactivate the setxkbmap us int command through CTRL or ALT F2 followed by CURSOR UP and enter plus CTRL or ALT F2 to quit the automatic console mode (Proverbe of Deepin: «In Deepin you can do all things in console mode!» and it is true

)

(*1 to make it permanent in Puppy: open the page, start the input king editor page after selecting the mode. close the browser with the option "save it before to close" and remaster Puppy with a copy of /root/.mozilla in it

(*2 so crowned by the input specialist inputking as the most performant keyboard layout at all: it is the standard in inputking and offers support for about all European or the most Latin keyboards plus Chinese pinyin and transcriptions chars using for ex. dots under the signs or chars! But,... it is not offered in the list of keyboard in Puppy able to be taken inconsideration in remasterings etc. using the front ends for those settings...

stemsee · #564 Post by **stemsee** » Tue 08 Oct 2019, 16:42

oui wrote:
icake wrote:The icake language pets use wqy-mircrohei.ttf fonts. I know it can handle both Traditional Chinese and Simplified Chinese but not sure whether it supports Japanese or Korean characters. After a quick search on the web, my view is Pan-CJK or fonts-ttf-wqy-microhei has the best chances to satisfy your needs.
A great "thank you very much" (it will make my Puppy remasters a lot more easy!!!)

icake wrote: fcitx Chinese input platform:
fcitx_4.2.9-en-zh-bionic-18.0.0.pet (30 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-bionic-18.0.0.pet (23 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-bionic-18.0.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-bionic-18.0.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-bionic-18.0.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-bionic-18.0.0.pet (9.5 mb)
To simplify my work, as I write only a bit in far east languages (more to learn them)

and perhaps are more puppyist's in that situation

I use online in my lovely browser (*1 the wonderful site

https://www.inputking.com/

and can forget all the stress to install, set up and care the formal usage difficulties of far east input methods

the only (little) stress is at the side of Linux and Puppy Linux (not able to add them in the list of proposed keyboards (beahbeahbeahbeahbeah Puppy linux! is really poor performance of all developers!)):

add the keyboard layout

US INTL !

but
Code: Select all
# setxkbmap us intl
works in about all linux distros (*2 ! Hurrah!

excepted in the Chinese one: Deepin ! Really fun as it is the international most known Chinese Linux! In Deepin, if you start with or add US INTL using setxkbmap, as soon you use the official deepin integrated console or the official deepin integrated file manager, the setting of us intl is lerased and you have reenter in the console and reactivate the setxkbmap us int command through CTRL or ALT F2 followed by CURSOR UP and enter plus CTRL or ALT F2 to quit the automatic console mode (Proverbe of Deepin: «In Deepin you can do all things in console mode!» and it is true )

(*1 to make it permanent in Puppy: open the page, start the input king editor page after selecting the mode. close the browser with the option "save it before to close" and remaster Puppy with a copy of /root/.mozilla in it

(*2 so crowned by the input specialist inputking as the most performant keyboard layout at all: it is the standard in inputking and offers support for about all European or the most Latin keyboards plus Chinese pinyin and transcriptions chars using for ex. dots under the signs or chars! But,... it is not offered in the list of keyboard in Puppy able to be taken inconsideration in remasterings etc. using the front ends for those settings...

trans_tray graphical frontend for google, bing and Yandex translation has a comprehensive keyboard layout selector with many variations. Try it!

fredx181 · #565 Post by **fredx181** » Tue 08 Oct 2019, 17:08

stemsee wrote:trans_tray graphical frontend for google, bing and Yandex translation has a comprehensive keyboard layout selector with many variations. Try it!

Yes, see here ! (shamelessly promoting....

)
http://murga-linux.com/puppy/viewtopic.php?t=116981

Fred

oui · #566 Post by **oui** » Tue 08 Oct 2019, 22:16

Thank you very much Fred! It also works in the extremely tiny wary64-6.99 after load of yad-0.40-amd64.pet!

a bit tedious is the use of the roll down languages / keyboard selectors instead of the usual entries in the old xorg.conf ! but, as German people say: why easy if possible to make difficult!

can that be entered in a text file?

comparaison:

- better in the online editor of inputking : you can use your spell check
- better in the little editor of trans: you have a save key for saving the text (but not the settings?)

----- google translate to Dutch -----
Heel erg bedankt Fred! Het werkt ook in de uiterst kleine omzichtig64-6.99 na belasting van yad-0.40-amd64.pet!

een beetje vervelend is het gebruik van de roll-down talen / toetsenbordkiezers in plaats van de gebruikelijke vermeldingen in de oude xorg.conf! maar, zoals Duitse mensen zeggen: waarom gemakkelijk indien mogelijk moeilijk te maken!

kan dat in een tekstbestand worden ingevoerd?

Ter vergelijking:

- beter in de online editor van invoer: u kunt uw spellingcontrole gebruiken
- beter in de kleine editor van trans: je hebt een sleutel om de tekst op te slaan (maar niet de instellingen?)

oui · #567 Post by **oui** » Wed 09 Oct 2019, 00:17

but it pretty also work in Deepin (actual system) see the 2 red points on the desktop.

installation? rename *.pet into *.gz and decompress the included file system and copy it on the Deepin file system. "trans" and trans_tray can be invoqued through ALT+2 and entering those name in the field on the top of the beautiful deepin app's manager. right mouse key will show an invitation to add to the start of Deepin. All it easy and fast to do with rox (rox is intalled in my deepin and work pretty, see 5th icon from left

).

trans will miss in Deepin the 2 dependencies. Install it with aptitude!

after that, youo can use trans in Deepin

see the printscreen (I did add the communistic background picture

)!

stemsee · #568 Post by **stemsee** » Wed 09 Oct 2019, 14:18

oui wrote: a bit tedious is the use of the roll down languages / keyboard selectors instead of the usual entries in the old xorg.conf !

you can use ctrl+f to search in language / keyboard selectors

oui · #569 Post by **oui** » Wed 09 Oct 2019, 18:12

hm, are all PC user today idiots only able to roll down selectors (else if with help of a search option)

hm, I like deepin and it's devise

«all can be done in commando line!»

ALT+F2 in deepin

and you accede to the commando line (the REAL Linux Level!!!)

egal at which time of process

and can forget all the DIALOGS needing only by the windowers spoiling linux!

icake · #570 Post by **icake** » Fri 11 Oct 2019, 00:18

I found 2 mistakes in the previous posting about bionicpup64 bit Chinese language pet dated Oct 6, 2019.

The correct names of the fcitx and scim pets for bionicpup64 should be:

fcitx64_4.2.9-en-zh-bionic-18.0.0.pet (30 mb) and

scim64_1.4.14-en-zh-bionic-18.0.0.pet (23 mb)

2 "64" were missing in the original posting and are now fixed.

icake · #571 Post by **icake** » Sat 12 Oct 2019, 15:35

stemsee wrote:Hi icake

I meant debian'dog' or any of the dogs by fredx, saintless, etp etc!
I tried to install using apt-get but I was not able to invoke the input method even though the tray and menu were there!

thanks for trying though. I will do some other research too.
stemsee

I have put together a quick and simple deb which can install the yong 2.4.0 input platform to the bionic dog 64 bit system. You can download yong64_2.4.0-en-zh-bionic-1.0.0.deb from : https://tinyurl.com/yxgkevos

Usage, after installing the deb in bionic dog 64 bit, restart x:
open terminal, type "startx" and press enter.

Let me know if you have any more questions.

stemsee · #572 Post by **stemsee** » Sat 12 Oct 2019, 23:28

Thanks icake

Installed and working well so far on BionicDog64.

I'm using Opera 64 browser and it accepts yong input method. I use left ctrl+space to activate.

stemsee

icake · #573 Post by **icake** » Fri 01 Nov 2019, 10:49

Further to the release of LxPupSc64 19.06.00T on Jun 3, 2019, peebee had released LxPupSc64 19.06.05T (Aug 17, 2019) and 19.09.00T (Sep 7, 2019) shortly

Main features:
New Woof-CE build based on Slackware64 Current

More information:
http://murga-linux.com/puppy/viewtopic. ... &start=360

Download iso:
19.06.00T delta to 19.06.05T:
https://sourceforge.net/projects/lxpup/ ... a/download
19.09.00T:
https://sourceforge.net/projects/lxpup/ ... o/download

I have created 6 half-Chinese language pets for

LxPupSc64 19.06.05T and 19.09.00T:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-13.1.7.pet (23 mb)

scim Chinese input platform:
scim64_1.4.14-en-zh-raring-13.1.7.pet (19 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.1.7.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.7.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.7.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.7.pet (9.5 mb)

Plus 2 Chinese language pets for LxPupSc64

19.06.05T and 19.09.00T:
Simplified Chinese:
lxpupsc64-19.06.05T-zhcn-13.1.7.pet (2.4 mb)
lxpupsc64-19.09.00T-zhcn-13.1.7.pet (2.4 mb)

Traditional Chinese:
lxpupsc64-19.06.05T-zhhk-13.1.7.pet (1.6 mb)
lxpupsc64-19.09.00T-zhhk-13.1.7.pet (1.6 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64 19.06.05T and 19.09.00T

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc64 19.06.05T and 19.09.00T

For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
For more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake · #574 Post by **icake** » Fri 01 Nov 2019, 10:52

Further to the release of x-slacko 4.4 slim systems r31, mistfire has released r32 to r35 shortly after

More information:
x-slacko 4.4 slim r31: http://murga-linux.com/puppy/viewtopic. ... &start=945

Download iso:
https://drive.google.com/open?id=1HQiFT ... OQYxG9oV70

I have created 6 half-Chinese language pets for x-slacko 4.4 slim r32 to r35:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-precise-12.2.1.pet (24.6 mb)

scim Chinese input platform:
scim_1.4.9-en-zh-precise-12.2.1.pet (22.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-precise-12.2.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.2.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.2.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.2.1.pet (9.5 mb)

Plus 2 Chinese language pets for x-slacko 4.4 slim r32 to r35:
Simplified Chinese:
xslacko-4.4slimr32-zhcn-12.2.1.pet (2.0 mb)
xslacko-4.4slimr33-zhcn-12.2.1.pet (2.0 mb)
xslacko-4.4slimr34-zhcn-12.2.1.pet (2.0 mb)
xslacko-4.4slimr35-zhcn-12.2.1.pet (2.0 mb)

Traditional Chinese:
xslacko-4.4slimr32-zhhk-12.2.1.pet (1.9 mb)
xslacko-4.4slimr33-zhhk-12.2.1.pet (1.9 mb)
xslacko-4.4slimr34-zhhk-12.2.1.pet (1.9 mb)
xslacko-4.4slimr35-zhhk-12.2.1.pet (1.9 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in x-slacko slim r32 to r35
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for x-slacko 4.4 slim r32 to r35

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake · #575 Post by **icake** » Fri 01 Nov 2019, 10:58

Further to the released of19.06.01T-k64 on Jun 10, 2019, LxPupSc 19.06.03T-k64 (released on Jul 14, 2019); 19.06.05T-k64 (released on AUG 17, 2019); 19.09.00T-k64 (released on Sep 1, 2019); 19.09.01T-k64 (released on Sep 12, 2019); 19.09.02T-k64 (released on Sep 20, 2019 and 19.09.03T-k64 (released on Sep 22, 2019) were subsequently released

More information:
http://murga-linux.com/puppy/viewtopic. ... start=1215

Download: https://sourceforge.net/projects/lxpup/ ... r/LxPupSc/

I have created 6 half-Chinese language pets for LxPupSc 19.06.03T-k64 to 19.09.03T-k64:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.1.pet (24.6 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.1.pet (22.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.1.pet (9.5 mb)

Plus 2 Chinese language pets each for LxPupSc 19.06.03T-k64 to 19.09.03T-k64:
Simplified Chinese:
lxpupsc-19.06.03T.k64-zhcn-17.0.1.pet (3.6 mb)
lxpupsc-19.06.05T.k64-zhcn-17.0.1.pet (3.6 mb)
lxpupsc-19.09.00T.k64-zhcn-17.0.1.pet (3.6 mb)
lxpupsc-19.09.01T.k64-zhcn-17.0.1.pet (3.6 mb)
lxpupsc-19.09.02T.k64-zhcn-17.0.1.pet (3.6 mb)
lxpupsc-19.09.03T.k64-zhcn-17.0.1.pet (3.6 mb)

Traditional Chinese:
lxpupsc-19.06.03T.k64-zhhk-17.0.1.pet (3.5 mb)
lxpupsc-19.06.05T.k64-zhhk-17.0.1.pet (3.5 mb)
lxpupsc-19.09.00T.k64-zhhk-17.0.1.pet (3.5 mb)
lxpupsc-19.09.01T.k64-zhhk-17.0.1.pet (3.5 mb)
lxpupsc-19.09.02T.k64-zhhk-17.0.1.pet (3.5 mb)
lxpupsc-19.09.03T.k64-zhhk-17.0.1.pet (3.5 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in 19.06.03T-k64 to 19.09.03T-k64

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for 19.06.03T-k64 to 19.09.03T-k64

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake · #576 Post by **icake** » Sun 01 Dec 2019, 05:03

peebee released a number of upup cc, dd and ee Puppy systems recently.

More information:
upupcc: http://murga-linux.com/puppy/viewtopic.php?t=114505
upupdd: http://murga-linux.com/puppy/viewtopic. ... 5d4b8b0ed3
upupee: http://www.murga-linux.com/puppy/viewtopic.php?t=117170
download: https://sourceforge.net/projects/zestypup/files/

I have created 6 half-Chinese language pets for upupcc 18.10.00; 18.10.18; upupdd 19.04.00; 19.04.14; upupee 19.10.00:
fcitx Chinese input platform:
for upupcc: fcitx_4.2.7-en-zh-xenial-17.0.1.pet (24.6 mb)
for upupdd 19.04.00: fcitx_4.2.7-en-zh-xenial-17.0.2.pet (24.6 mb)
for upupdd 19.04.14 and upupee 19.10.00: fcitx_4.2.7-en-zh-xenial-17.0.2u.pet (24.6 mb)

scim Chinese input platform:
for upupcc: scim_1.4.14-en-zh-xenial-17.0.1.pet (22.1 mb)
for upupdd 19.04.00: scim_1.4.14-en-zh-xenial-17.0.2.pet (22.1 mb)
for upupdd 19.04.14 and upupee 19.10.00: scim_1.4.14-en-zh-xenial-17.0.2u.pet (22.1 mb)

yong Chinese input platform:
for upupcc:
yong3264_4.2.0-en-zh-xenial-17.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.1.pet (9.5 mb)

for upupdd 19.04.00
yong3264_4.2.0-en-zh-xenial-17.0.2.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.2.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.2.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.2.pet (9.5 mb)

for upupdd 19.04.14 and upupee 19.10.00
yong3264_4.2.0-en-zh-xenial-17.0.2u.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.2u.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.2u.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.2u.pet (9.5 mb)

Plus 2 Chinese language pets each for upupcc 18.10.00; 18.10.18; upupdd 19.04.00; 19.04.14; upupee 19.10.00:
Simplified Chinese:
upupcc-18.10.00-zhcn-17.0.1.pet (3.7 mb)
upupcc-18.10.18-zhcn-17.0.1.pet (3.7 mb)
upupdd-19.04.00-zhcn-17.0.2.pet (3.7 mb)
upupdd-19.04.14-zhcn-17.0.2u.pet (3.7 mb)
upupee-19.10.00-zhcn-17.0.2u.pet (3.7 mb)

Traditional Chinese:
upupcc-18.10.00-zhhk-17.0.1.pet (3.6 mb)
upupcc-18.10.18-zhhk-17.0.1.pet (3.6 mb)
upupdd-19.04.00-zhhk-17.0.2.pet (3.6 mb)
upupdd-19.04.14-zhhk-17.0.2u.pet (3.6 mb)
upupee-19.10.00-zhhk-17.0.2u.pet (3.6 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in upupcc 18.10.00; 18.10.18; upupdd 19.04.00; 19.04.14; upupee 19.10.00

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for upupcc 18.10.00; 18.10.18; upupdd 19.04.00; 19.04.14; upupee 19.10.00

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake · #577 Post by **icake** » Sun 01 Dec 2019, 05:04

peebee has released BionicPup32 8.0.14 on Oct 20, 2019

More information and forum discussions:
http://murga-linux.com/puppy/viewtopic.php?t=113244

Download: http://distro.ibiblio.org/puppylinux/puppy-bionic/

I have created 6 half-Chinese language pets for BionicPup32 8.0.14:

fcitx Chinese input platform:
fcitx_4.2.7-en-zh-raring-13.0.2.pet (24 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-raring-13.0.2.pet (23 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.0.2.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.0.2.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.0.2.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.0.2.pet (9.5 mb)

Plus 2 Chinese language pets each for BionicPup32 8.0.14:
Simplified Chinese:
bionicpup32-8.0.14-zhcn-13.0.2.pet (2.9 mb)

Traditional Chinese:
bionicpup32-8.0.14-zhhk-13.0.2.pet (2.9 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in BionicPup32 8.0.14

(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for BionicPup32 8.0.14

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake · #578 Post by **icake** » Sun 01 Dec 2019, 05:07

csipesz has released BionicPup64 8.0 vol 2 in Jul 2019

More information and forum discussions:
http://www.murga-linux.com/puppy/viewtopic.php?t=115823

Download: http://archive.org/details/Puppy_Linux_Bionicpup64

I have created 6 half-Chinese language pets for BionicPup64 8.0 vol 2 2019Jul Csipesz :

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-18.0.0.pet (30 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-18.0.0.pet (23 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-bionic-18.0.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-bionic-18.0.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-bionic-18.0.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-bionic-18.0.0.pet (9.5 mb)

Plus 2 Chinese language pets for BionicPup64 8.0 vol 2 2019Jul Csipesz:
Simplified Chinese:
bionicpup648v22019JulCsipesz-zhcn-18.0.0.pet (3.7 mb)

Traditional Chinese:
bionicpup648v22019JulCsipesz-zhhk-18.0.0.pet (3.6 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in BionicPup64 8.0 vol 2 2019Jul Csipesz

(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for BionicPup64 8.0 vol 2 2019Jul Csipesz

for more information about the fcitx64 4.2.9 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
for more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

quenyan · #579 Post by **quenyan** » Mon 02 Dec 2019, 02:55

please guide me, I can't find the pet files, where it is stored? the archive link doesn't have it.

icake · #580 Post by **icake** » Mon 02 Dec 2019, 04:38

quenyan wrote:please guide me, I can't find the pet files, where it is stored? the archive link doesn't have it.

To better help you, I need to know:
1. which puppy systems are your using?
2. which Chinese input platform do you want to install (fcitx, scim, yong)?

Once I know these, I can give your more details.
icake

(old)Puppy Linux Discussion Forum

(old)Puppy Linux Discussion Forum