Freecad0.16-17-18/32-64bit+HeeksCAD1.1.0+HeeksCNC+blendercam
Posted: Fri 29 Aug 2014, 18:40
News:
#6feb2019-- Freecad team now got a an app.image of it,(edited :only 64bit),stable and dev ones. Those sfs are now ¨obselete¨, for those big dependencies hungry packages like freecad,appimage are win win solution.So,eventually we will be more likely to see addon of the app.image,sfs or app or pet or modified app.image of ¨official¨ ones.Started a new topic on Freecad appimage topic were we will look at test,revision, perhaps editing if needed...
Heekscad should see here sfs updates...or flag of its appimage if it come to it... and maybe 32bit freecad,if ask for it,because,lets be realistic,it need ram,cpu power,so ,who would run that old hardware,few.
#21dec2018--a fatdog800 freedcad-daily+full dependencies test sfs....100% warranty free..from same tahr builds,not fully functionnal, play safe,backup savefile/folder. (freecad-daily_0.18-beta-fatdog-64bit_2018-12-17=168 Mb),but it may be the only test.
#18dec2018-edited x 2-if you read it before ,it shure was confusing...sorry testing all tahrpup/xenial/32/64bit+bionicpup64+fixes strain the higgledy-piggledy me...
-uploaded(this453deps.sfs) a new freecad 32bit dependencies sfs for 32bit FC found here,in tahrpup & xenial ,old one was missing 1 lib,
libboost_python-py27.so.1.55.0 , fixed in the new 453.sfs and smaller in size than old 452.
Good thing helping "compatibility"of tahr,xenial,bionicpup for those freecad sfs is that they mostly use non native(currently not included within puppy's)
dependencies,so,no rush to make a dedicate version for each puppy...until dev team stop building it for tahr...or get it qt5 only..
#17dec2018-- freecad-daily-0.18-beta sfs updated (64bit)(32bit) --lots new ...
-32bit sfs need the same as before (this452deps.sfs)
-64bit sfs include dependencies.
note:
-1:wont for now try make 32bit freecad for newer puppy,its tahrpup tested and should run on xenialpup,but with tweaks you can use its 64bits sfs with *bionicpup64 .but,you will need qt4"base"+fixes:
-----instal from ppm >qt4 opengl+deps+qt4 svg and (this fixlibs.pet)
-2 feel sorry i left aside blendercad,i liked it a lot,but ,the ambitious project of freecad,the team efforts in development deserve the interest,with the sad "side effect".... next year....soon,should update Heekscad..
#1july2018--freecad-daily-0.18-beta sfs (64bit)(32bit) --path module and many more matured a lot ...unpacked with dependencies fc is fat,no surprises for so much features.
-32bit sfs need the same as before (this452deps.sfs)
-64bit sfs include dependencies.
#16apr2018--freecad-daily-0.18-beta (64bit)(32bit) --not yet qt5 build...so,it work.
No big difference from 0.17 "Roland"release,more of a "test of concept"...
Deleted oldies from this post and Gdrive.
#10apr2018--freecad-0.17 stable sfs(64bit)(32bit)
Again,32bit sfs need (this.sfs)xenialpup CE &tahrpup tested.
New freecad 0.18 will be qt5 build,my few attempt yet with everything touching qt5 where all fruitless -edit:its getting there in 2019...qt5 was officially released on 19 December 2012...outch...
#14feb2018--New freecad-daily 17 alpha1 from
git20180213(64bit)(32bit)
Again,-32bit sfs need (this.sfs)
-64bit sfs include dependencies.
#1dec2017--New freecad-daily 17 alpha1 from
git20171124(64bit)(32bit)
Again,-32bit sfs need (4_52_freecad-dev0.17deps_only_6.0.5.sfs)
-64bit sfs include dependencies.
Deleted old stuff and comments on this post.
#26june2017--Test latest "beta" xenial pup32&64 with freecad only,works.
New freecad-daily 17 alpha1 from
git20170626(64bit)(32bit)
Again,-32bit sfs need (4_52_freecad-dev0.17deps_only_6.0.5.sfs)
-64bit sfs include dependencies
Heekscad sfs from 20170616(32bit)need same deps as freecad32bit,4,52 and (64bit full ,including dependencies)
Cleaned history of sfs build from this post...
#9oct2016-uploaded 32 bit freecad 0.16 stable sfs(freecad-0.16-32bit-stable-oce.17-ccx-assembly2_6.0.5.sfs),need (4_52_freecad-dev0.17deps_only_6.0.5.sfs)
#23july2016-Update Heekscad 1.1.0 32bit to latest build found(here ),need dependencies 4.52 sfs,same as freecad-daily(here)
Uploaded new Heekscad 64bit sfs with latest build found with dependencies(here)
#13july16--Again for curious users,anxious?get off your computer...pump some blood. FreeCAD-daily 0.17- Alpha1,(deleted from drive...so,let it flow)
#jun 15 -- Update Heekscad to 1.1.0 ,again it need same 4_5_freecad-dev0.15deps_only.sfs . Look for Heekscad-1.1.0+Heekscnc.sfs.
Donate ,buy or rent...not sure...ask Mr. Heeks. Great program anyhow!
# mai 15--Guess i could rename title cam/cad/linux/puppy/whatever..
Add a blender cam sfs for testing ,85Mb,same googledrive.Tested only on tahrpup,should work with other as its linux build ,no specific distro.
I did remove libGlU libGl from original causing me problem.
Check your cpu at work with that !
#19 avril 15---Heekscad+Heekscnc 1.0.0.B.sfs now working with 4_5_Freecad deps sfs
#8sept. 14--- add dxf import scripts. Copy scripts from the folder named :importdxfcopytoroot.FreeCAD
to root .FreeCAD...as the name says...
Why?:https://github.com/yorikvanhavre/Draft-dxf-importer
___________________________________________________________________
Tested on :
-tahrpup 5.8.3 & rc1 & 5.8.4&6.0 CE ** NOTE:Qtlibs does NOT like upgraded savefiles ,work fine from fresh install .
-xenialpup64 7.8.5 &xenialpup 7.0.1()freecad only)
-studio v2 OK .
(based on slack/O 13.37,but so much libs installed)
-else with negative test.. dpup,slacko :missing/misdirected/ libs or Qt version prob.
___________________________________________________________________
<***>Know problems&missing,n/a functions & possibles solutions:
lots
look online for changelog /todo or report/suggest some to devs...
Plenty of help and tutorials online.
Again ,save often ..
_____________________________________________________________
http://www.freecadweb.org/
It is very power/features full parametric cad software .
Parts library :https://github.com/yorikvanhavre/FreeCAD-library
Assembly module:https://github.com/hamish2014/FreeCAD_assembly2
Thanks to all.
Packed from Ubuntu build packages:
https://launchpad.net/~freecad-maintain ... ecad-daily
_____________________________________________________________
Heekscad+ Heekscnc
from : https://launchpad.net/~neomilium/+archi ... scnc-devel
It got enough cam functions to do a lot,until freecad got his own cam module .After hours of trials&errors,confirmed:lots of bugs,EDIT: sorry Mr Heeks... when you know what you are doing& what not to... it work very nicely ,the program for now, this linux version(maybe it is the same for the M$ version??!!), just dont give lots of feedback on what problems/design flaws sometime prevent machine/code generation,even in console ,Lets keep in mind the complexity of the task here,it justified the price of Ma$tercam...
or crowdfunding of opensource cam project a must...
A great work in progress ,thank Mr Heeks&all.
https://sites.google.com/site/heekscad/ ... nuxversion
____________________________________________________________
Blendercam 2.70a &cam 0.8.0
from:http://blendercam.blogspot.ca
Few sample: samples:https://blendercam.googlecode.com/files/samples.blend
I did remove libGlU libGl from original causing me problem.
Thanks to Vilém Novák ,Bernhard Braun & all.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Download all sfs&checksum :
here for everything...
Share your experiences & suggestions or weird/unorthodox/strange things you find in that sfs or my average english.....
I'm way far of a puppy,cad,compiling specialist,linux geek,nerd &way farther a developer ,just a daily puppy linux user trying to stay away from M$ with growing knowledge here & there .
Thanks to all linux cad cam puppys debian canonical devs...
Does include docs,not all.No src as I had nothing to compile,lazy me
#6feb2019-- Freecad team now got a an app.image of it,(edited :only 64bit),stable and dev ones. Those sfs are now ¨obselete¨, for those big dependencies hungry packages like freecad,appimage are win win solution.So,eventually we will be more likely to see addon of the app.image,sfs or app or pet or modified app.image of ¨official¨ ones.Started a new topic on Freecad appimage topic were we will look at test,revision, perhaps editing if needed...
Heekscad should see here sfs updates...or flag of its appimage if it come to it... and maybe 32bit freecad,if ask for it,because,lets be realistic,it need ram,cpu power,so ,who would run that old hardware,few.
#21dec2018--a fatdog800 freedcad-daily+full dependencies test sfs....100% warranty free..from same tahr builds,not fully functionnal, play safe,backup savefile/folder. (freecad-daily_0.18-beta-fatdog-64bit_2018-12-17=168 Mb),but it may be the only test.
#18dec2018-edited x 2-if you read it before ,it shure was confusing...sorry testing all tahrpup/xenial/32/64bit+bionicpup64+fixes strain the higgledy-piggledy me...
-uploaded(this453deps.sfs) a new freecad 32bit dependencies sfs for 32bit FC found here,in tahrpup & xenial ,old one was missing 1 lib,
libboost_python-py27.so.1.55.0 , fixed in the new 453.sfs and smaller in size than old 452.
Good thing helping "compatibility"of tahr,xenial,bionicpup for those freecad sfs is that they mostly use non native(currently not included within puppy's)
dependencies,so,no rush to make a dedicate version for each puppy...until dev team stop building it for tahr...or get it qt5 only..
#17dec2018-- freecad-daily-0.18-beta sfs updated (64bit)(32bit) --lots new ...
-32bit sfs need the same as before (this452deps.sfs)
-64bit sfs include dependencies.
note:
-1:wont for now try make 32bit freecad for newer puppy,its tahrpup tested and should run on xenialpup,but with tweaks you can use its 64bits sfs with *bionicpup64 .but,you will need qt4"base"+fixes:
-----instal from ppm >qt4 opengl+deps+qt4 svg and (this fixlibs.pet)
-2 feel sorry i left aside blendercad,i liked it a lot,but ,the ambitious project of freecad,the team efforts in development deserve the interest,with the sad "side effect".... next year....soon,should update Heekscad..
#1july2018--freecad-daily-0.18-beta sfs (64bit)(32bit) --path module and many more matured a lot ...unpacked with dependencies fc is fat,no surprises for so much features.
-32bit sfs need the same as before (this452deps.sfs)
-64bit sfs include dependencies.
#16apr2018--freecad-daily-0.18-beta (64bit)(32bit) --not yet qt5 build...so,it work.
No big difference from 0.17 "Roland"release,more of a "test of concept"...
Deleted oldies from this post and Gdrive.
#10apr2018--freecad-0.17 stable sfs(64bit)(32bit)
Again,32bit sfs need (this.sfs)xenialpup CE &tahrpup tested.
New freecad 0.18 will be qt5 build,my few attempt yet with everything touching qt5 where all fruitless -edit:its getting there in 2019...qt5 was officially released on 19 December 2012...outch...
#14feb2018--New freecad-daily 17 alpha1 from
git20180213(64bit)(32bit)
Again,-32bit sfs need (this.sfs)
-64bit sfs include dependencies.
#1dec2017--New freecad-daily 17 alpha1 from
git20171124(64bit)(32bit)
Again,-32bit sfs need (4_52_freecad-dev0.17deps_only_6.0.5.sfs)
-64bit sfs include dependencies.
Deleted old stuff and comments on this post.
#26june2017--Test latest "beta" xenial pup32&64 with freecad only,works.
New freecad-daily 17 alpha1 from
git20170626(64bit)(32bit)
Again,-32bit sfs need (4_52_freecad-dev0.17deps_only_6.0.5.sfs)
-64bit sfs include dependencies
Heekscad sfs from 20170616(32bit)need same deps as freecad32bit,4,52 and (64bit full ,including dependencies)
Cleaned history of sfs build from this post...
#9oct2016-uploaded 32 bit freecad 0.16 stable sfs(freecad-0.16-32bit-stable-oce.17-ccx-assembly2_6.0.5.sfs),need (4_52_freecad-dev0.17deps_only_6.0.5.sfs)
#23july2016-Update Heekscad 1.1.0 32bit to latest build found(here ),need dependencies 4.52 sfs,same as freecad-daily(here)
Uploaded new Heekscad 64bit sfs with latest build found with dependencies(here)
#13july16--Again for curious users,anxious?get off your computer...pump some blood. FreeCAD-daily 0.17- Alpha1,(deleted from drive...so,let it flow)
#jun 15 -- Update Heekscad to 1.1.0 ,again it need same 4_5_freecad-dev0.15deps_only.sfs . Look for Heekscad-1.1.0+Heekscnc.sfs.
Donate ,buy or rent...not sure...ask Mr. Heeks. Great program anyhow!
# mai 15--Guess i could rename title cam/cad/linux/puppy/whatever..
Add a blender cam sfs for testing ,85Mb,same googledrive.Tested only on tahrpup,should work with other as its linux build ,no specific distro.
I did remove libGlU libGl from original causing me problem.
Check your cpu at work with that !
#19 avril 15---Heekscad+Heekscnc 1.0.0.B.sfs now working with 4_5_Freecad deps sfs
#8sept. 14--- add dxf import scripts. Copy scripts from the folder named :importdxfcopytoroot.FreeCAD
to root .FreeCAD...as the name says...
Why?:https://github.com/yorikvanhavre/Draft-dxf-importer
___________________________________________________________________
Tested on :
-tahrpup 5.8.3 & rc1 & 5.8.4&6.0 CE ** NOTE:Qtlibs does NOT like upgraded savefiles ,work fine from fresh install .
-xenialpup64 7.8.5 &xenialpup 7.0.1()freecad only)
-studio v2 OK .
(based on slack/O 13.37,but so much libs installed)
-else with negative test.. dpup,slacko :missing/misdirected/ libs or Qt version prob.
___________________________________________________________________
<***>Know problems&missing,n/a functions & possibles solutions:
lots
look online for changelog /todo or report/suggest some to devs...
Plenty of help and tutorials online.
Again ,save often ..
_____________________________________________________________
http://www.freecadweb.org/
It is very power/features full parametric cad software .
Parts library :https://github.com/yorikvanhavre/FreeCAD-library
Assembly module:https://github.com/hamish2014/FreeCAD_assembly2
Thanks to all.
Packed from Ubuntu build packages:
https://launchpad.net/~freecad-maintain ... ecad-daily
_____________________________________________________________
Heekscad+ Heekscnc
from : https://launchpad.net/~neomilium/+archi ... scnc-devel
It got enough cam functions to do a lot,until freecad got his own cam module .After hours of trials&errors,confirmed:lots of bugs,EDIT: sorry Mr Heeks... when you know what you are doing& what not to... it work very nicely ,the program for now, this linux version(maybe it is the same for the M$ version??!!), just dont give lots of feedback on what problems/design flaws sometime prevent machine/code generation,even in console ,Lets keep in mind the complexity of the task here,it justified the price of Ma$tercam...
or crowdfunding of opensource cam project a must...
A great work in progress ,thank Mr Heeks&all.
https://sites.google.com/site/heekscad/ ... nuxversion
____________________________________________________________
Blendercam 2.70a &cam 0.8.0
from:http://blendercam.blogspot.ca
Few sample: samples:https://blendercam.googlecode.com/files/samples.blend
I did remove libGlU libGl from original causing me problem.
Thanks to Vilém Novák ,Bernhard Braun & all.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Download all sfs&checksum :
here for everything...
Share your experiences & suggestions or weird/unorthodox/strange things you find in that sfs or my average english.....
I'm way far of a puppy,cad,compiling specialist,linux geek,nerd &way farther a developer ,just a daily puppy linux user trying to stay away from M$ with growing knowledge here & there .
Thanks to all linux cad cam puppys debian canonical devs...
Does include docs,not all.No src as I had nothing to compile,lazy me