I have some free time to try OpenObex, but I am not sure if it supports my phone (Samsung E900). May be somebody know this? I dont want to spend time doing useless things...

I had such problem when Linux kernel didn't like my hdd. Everything as you describe, bu with ANY linux kernel, not only puppy... Try "ide=nodma" option. Or try to disable Ide controller in bios and boot from usb (just to find out what is wrong).

Ok, it's good software, thank you for the link. I will try it. But i think i need to find other old hdd, because with this linux kernel can't start, so it will be useless... Damned, my isp said, that "because of technical problems" there will be no internet for 5 days.... so if i will not ...

It seems to be detected correctly. Have you tried to use wizard? What problems do you have? Be more specifk.

So, withot ability to boot from cd in bios and such puppy is useless here
I have installed OpenBSD 3.8, Apache PHP, MySql, vsftpd, squd. It works good, and have 180 mb of free space. So i think it's ideal here. You can see it at http://ddaemon.hopto.org. (it's in russian).

It didn't help. ANY linux kernel hangs up while trying to boot with this hdd attached. I have formated it to fat16 in dos (had only dos6.22, with no fat32 support). It changed nothing. Now i am trying to install OpenBSD. It's kernel boots ok, even enables DMA mode1 on that hdd. Windows 98 installs, ...

I finally tested it. Without hdd it boots and works, slow, of coource (48mb ram without swap). When i connect hdd, it hangs up while initilising ide. if i add ide=nodma, it hangs up while loading fuse. i wonder, what may be happening with hdd, so that it hangs up ANY linux??? I tried dsl, redhat8, s...

it says "-1 unknown symbol in module" i think i need correct drm.ko 2 tempestuous: i have downloaded package, it says version missmatch (lost that log, will try again and attach log) here it is: (EE) ATI(0): [dri] ATIDRIScreenInit failed because of a version mismatch. [dri] mach64.o kernel...

DAMN, I AM FOOL!!!!
there is simply no such module!!!
But i wonder where i can get march64 module for puppy 212.
I attach my log, but it seems to be useless
there is no march64.ko in drm-kernelmodules.pup????[/code]

lsmod gives such result: Module Size Used by ppp_async 11408 1 crc_ccitt 1968 1 ppp_async ppp_generic 27460 5 ppp_async slhc 7056 1 ppp_generic bnep 11536 2 hci_usb 14668 3 rfcomm 33644 4 l2cap 19924 11 bnep,rfcomm bluetooth 43876 8 bnep,hci_usb,rfcomm,l2cap snd_mixer_oss 17328 0 lp 12520 0 parport_...

Yes, you were right, 800x600x16 fixed this memory issue. But now it says: (==) ATI(0): Write-combining range (0xfd000000,0x400000) (II) ATI(0): [drm] SAREA 2200+1208: 3408 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open res...

have you received my pm?

No problems. Puppy runs fine on my laptop. I even can play video with console mplayer, compiled on this CPU (Xine is VERY slow). While working fan dind't start, it will start only after 10-15 minutes of video playback. I think it is because of HARDWARE CPU termal throttling and idle (both options ar...

Yes, i've read this Cards earlier than the ATI 3D Rage Pro don't have a triangle setup engine and are not supported. This includes VT chips, ATI 3D Rage, ATI 3D Rage II/II+/IIc, and ATI 3D Rage LT. Supported cards include ATI 3D Rage Pro, ATI 3D Rage LT Pro , ATI 3D Rage XL or XC, and ATI 3D Rage Mo...

I have installed 3DCC, drm,dri modules, opengl libs, but acceleration didn't work. 3DCC says "DRI-Status: DRI is NOT active, the demo should run slow (< 10 fps)" and demo runs at 4fps. What is wrong? What i made incorrect? SYSINFO in 3DCC says "Your /var/log/Xorg.0.log reports you hav...

I am here :) I will try to make it work today, and will post results as soon as get them. I have puppy 2.12 with devx, kde, openoffice, etc.. running on my old laptop vithout hdd (p2-400, 192mb ram, cd) in mode 13 (boot frome live cd, rest data on usb stick). So can i connect my 540mb hd to laptop t...

The question is: Will puppy run on such pc: Pentium 100/48mb ram/2mb video/540mb hdd/CD-Rom(52x). I don't need GUI at all, i just want my old pc (only mb+power supply with fan turned off, without a case and without monitor) to work as http\ftp\proxy server. Can puppy run from CD with small (e.g. 100...

I have used RedHat Enterprise 4AS, and i am using it now, before that i used Red Hat linux 9.0 for 2 years.
But all this is useless for my old laptop without HDD. Puppy is ideal here.

I have solved my problem with gprs! Now it connects 100% I think speed does not matter, so may be returned to 115200, i made it 56700 just for safety. Here are my pppd config files: Peers: noauth connect "/usr/sbin/chat -v -f /etc/ppp/chatscripts/akos" /dev/rfcomm0 #115200 57600 defaultrou...

I've already understood it.... This driver is realy strange... It detects PCMCI USB well, so it does not matter to what port i connect my stick. It detects my old mp3 player, and flash drive (both 128 mb), 128 mb stick is USB2.0. It detects my phone's storage card (E900, 512mb micro sd) which cannot...