BionicPup32 (UPupBB) (27 June 2020)
-
- Posts: 564
- Joined: Tue 09 Jun 2009, 21:06
Hmmm....24 hours later and how things have changed !
After several reboots and installing a few things as well as Firefox and Apulse,(to remedy the usual sound issues)sound only works for around two hours before a restart is required.
Changed browsers and using the stock light browser,some sites report it is dated and several important buttons in 'Yahoo mail' don't function at all.
Installing Chromium finally broke the system completely.
Now running with a backup save.
After several reboots and installing a few things as well as Firefox and Apulse,(to remedy the usual sound issues)sound only works for around two hours before a restart is required.
Changed browsers and using the stock light browser,some sites report it is dated and several important buttons in 'Yahoo mail' don't function at all.
Installing Chromium finally broke the system completely.
Now running with a backup save.
apulse is in the build....Brown Mouse wrote:Apulse,
light browser,
Installing Chromium finally broke the system completely.
light is what it says - a light browser which should be replaced with a heavyweight....
which Chromium did you install?? There is an sfs available via Get Browser in the Internet menu.....
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
-
- Posts: 564
- Joined: Tue 09 Jun 2009, 21:06
Hi peebeepeebee wrote:apulse is in the build....Brown Mouse wrote:Apulse,
light browser,
Installing Chromium finally broke the system completely.
light is what it says - a light browser which should be replaced with a heavyweight....
which Chromium did you install?? There is an sfs available via Get Browser in the Internet menu.....
I have sound in the built in browser but not in Firefox.That's why I installed Apulse as a test.After that sound worked in FF.
Downloaded both FF and Chromium SFS's from the menu and as soon as I run Chromium it crashes my graphics and I have to then do a hard reset.
I had similar issues when running Xenial on this box.
Stability? could be this -
Stability? could be this - http://murga-linux.com/puppy/viewtopic. ... 82#1009482
Responding to ozsouth's post, http://murga-linux.com/puppy/viewtopic. ... 91#1009491
-
- Posts: 564
- Joined: Tue 09 Jun 2009, 21:06
- perdido
- Posts: 1528
- Joined: Mon 09 Dec 2013, 16:29
- Location: ¿Altair IV , Just north of Eeyore Junction.?
Same here, palemoon makes sound no problem.Brown Mouse wrote:Running well now with Pale Moon installed.
Download the palemoon x86 tarbz2 tarbal from this page.
Extract the .tar.bz2 file and copy to where you want it.
Either mouse click on palemoon executable or mouse drag the palemoon executable to desktop and open by mouse click on palemoon icon.
No need to add anything to bionic for this to work.
.
Browser Alternatives
Hi Brown Mouse,
I'm glad that Palemoon is running well. It's a fine browser for general use. But currently I think it has one drawback. Some (increasingly more) websites will only allow access if you are running the latest Google-Chrome (maybe Chromium will suffice -- I haven't tried), firefox, or whatever microsoft is now pushing. Until Palemoon recently changed its code this didn't present a problem. There was an addon named 'User-agent' which easily enabled you to spoof -- tell Websites that you were using one of the 'permitted'. But, unless I missed it, an examination of the Palemoon's current addons doesn't include it.
Being able to spoof may still be possible. See the end of spiritwild's post, http://murga-linux.com/puppy/viewtopic. ... 674#975674, which provides both a link to a "How to" and his reason, and mine, for not doing it.
The alternative is to also have an "acceptable" web-browser available for those occasions when you need it. The easiest one to set up is fredx181's portable firefox, http://murga-linux.com/puppy/viewtopic. ... 010#978010. I'm not currently in UPupBB, but AFAIR, I have it on that OS. [Will check back later to confirm].
Despite the problems you had with Chromium, you might want to try OscarTalks' Iron, http://murga-linux.com/puppy/viewtopic. ... 36#1009536 or even an earlier version. Iron does support a 'User-Agent' extension.
I'm glad that Palemoon is running well. It's a fine browser for general use. But currently I think it has one drawback. Some (increasingly more) websites will only allow access if you are running the latest Google-Chrome (maybe Chromium will suffice -- I haven't tried), firefox, or whatever microsoft is now pushing. Until Palemoon recently changed its code this didn't present a problem. There was an addon named 'User-agent' which easily enabled you to spoof -- tell Websites that you were using one of the 'permitted'. But, unless I missed it, an examination of the Palemoon's current addons doesn't include it.
Being able to spoof may still be possible. See the end of spiritwild's post, http://murga-linux.com/puppy/viewtopic. ... 674#975674, which provides both a link to a "How to" and his reason, and mine, for not doing it.
The alternative is to also have an "acceptable" web-browser available for those occasions when you need it. The easiest one to set up is fredx181's portable firefox, http://murga-linux.com/puppy/viewtopic. ... 010#978010. I'm not currently in UPupBB, but AFAIR, I have it on that OS. [Will check back later to confirm].
Despite the problems you had with Chromium, you might want to try OscarTalks' Iron, http://murga-linux.com/puppy/viewtopic. ... 36#1009536 or even an earlier version. Iron does support a 'User-Agent' extension.
- perdido
- Posts: 1528
- Joined: Mon 09 Dec 2013, 16:29
- Location: ¿Altair IV , Just north of Eeyore Junction.?
Re: Browser Alternatives
Hi mikeslr,
Palemoon has the ability to change user agent built-in now.
Under
Tools--->Preferences--->Advanced--->Compatibility
There is User Agent Mode
That lets you choose between "Firefox" , "Gecko" , or "Native",
I have it set for Firefox and have not been denied access, but maybe I just don't visit those highfalutin places that do that.
I use it to interact with my bank even though I get the "the browser you are using is not supported" heading before I login. I remember that firefox also was not supported, just internet exploder and google
The user agent can also be done for specific websites (if needed) by going into about:config-->https://bgstack15.wordpress.com/2018/05 ... pale-moon/.
Google sure has the internet scared into thinking they are the answer-all as they steal and sell your personal info. Piece of trivia, google has offices in bothell, wa (bot-hell) lol.
.
Palemoon has the ability to change user agent built-in now.
Under
Tools--->Preferences--->Advanced--->Compatibility
There is User Agent Mode
That lets you choose between "Firefox" , "Gecko" , or "Native",
I have it set for Firefox and have not been denied access, but maybe I just don't visit those highfalutin places that do that.
I use it to interact with my bank even though I get the "the browser you are using is not supported" heading before I login. I remember that firefox also was not supported, just internet exploder and google
The user agent can also be done for specific websites (if needed) by going into about:config-->https://bgstack15.wordpress.com/2018/05 ... pale-moon/.
Google sure has the internet scared into thinking they are the answer-all as they steal and sell your personal info. Piece of trivia, google has offices in bothell, wa (bot-hell) lol.
.
Hi perdido,
User-agent builtin. Explains why I couldn't find an addon. So this will be the third time in 24 hours I've posted "I hate change."
Having booted into Upupbb, albeit without yet having installed the latest delta, I can confirm that both firefox-portable (which auto-updates) and Iron, albeit Version 63.0.3300.0 run well. I'm posting from the latter now.
User-agent builtin. Explains why I couldn't find an addon. So this will be the third time in 24 hours I've posted "I hate change."
Having booted into Upupbb, albeit without yet having installed the latest delta, I can confirm that both firefox-portable (which auto-updates) and Iron, albeit Version 63.0.3300.0 run well. I'm posting from the latter now.
-
- Posts: 564
- Joined: Tue 09 Jun 2009, 21:06
Re: Browser Alternatives
Hi mikesirmikeslr wrote:
Despite the problems you had with Chromium, you might want to try OscarTalks' Iron, http://murga-linux.com/puppy/viewtopic. ... 36#1009536 or even an earlier version. Iron does support a 'User-Agent' extension.
Thank you for the help.
I tried the above version of Iron but it has the very same effects that Chromium has and crashes my graphics immediately it starts.
Just not suited to my onboard graphics which is all I have right now.
I shall stick with Pale Moon for this one.Been running many hours now with no problems.
- Max Headroom
- Posts: 421
- Joined: Wed 28 Jun 2006, 07:17
- Location: GodZone Kiwi
- Contact:
G'day there Fellow Puppy Lovers, so I've Successfully installed sc0ttmans cli Package Manager & then it in turn Successfully installed VLC Media Player , Resolving Dependencies as it went, Great!
However I've got a Problem getting Compiz working...
I'd Appreciate any Help Please....
;-\K
However I've got a Problem getting Compiz working...
I'd Appreciate any Help Please....
;-\K
- Attachments
-
- Screenshot3.png
- (177.65 KiB) Downloaded 213 times
PC is Not Political Correctness :P , it's a Personal Computer! Boycott the Evil M$ & Google!
My HP laptop has broadcom wireless chip which works only with proprietary wl.ko kernel module. I searched ARCH linux recipe for needed patches and I used also the source package from that page.
https://aur.archlinux.org/packages/broadcom-wl-ck/
After patching the source I compiled the wl.ko module and I am using it now so it works.
I didnt find existing wl,ko module so I uploaded it if someone else also needs it.
http://smokey01.com/pemasu/UpupBionicBe ... 4.9.96.pet
https://aur.archlinux.org/packages/broadcom-wl-ck/
After patching the source I compiled the wl.ko module and I am using it now so it works.
I didnt find existing wl,ko module so I uploaded it if someone else also needs it.
http://smokey01.com/pemasu/UpupBionicBe ... 4.9.96.pet
Thanks pemasupemasu wrote:I didnt find existing wl,ko module so I uploaded it if someone else also needs it.
Uploaded to: https://sourceforge.net/projects/zestyp ... c/drivers/
and added to post #3
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
- Max Headroom
- Posts: 421
- Joined: Wed 28 Jun 2006, 07:17
- Location: GodZone Kiwi
- Contact:
Sorry Guys, I can't find the info or remember the How 2 Edit the xorg.conf file from a Decade ago, 2 get Compiz working... Has anybody got a Template? Please
;-\K
;-\K
- Attachments
-
- Screenshot4.png
- (241.23 KiB) Downloaded 194 times
PC is Not Political Correctness :P , it's a Personal Computer! Boycott the Evil M$ & Google!
ndiswrapper
I've deleted the ndiswrapper .pets
I've now got an .inf file for the wifi in my laptop so I can test. It works with an old slacko kernel and ndiswrapper.
ndiswrapper compiles ok but crashes when run under kernel 4.9
I can't find any relevant patches.
Sorry! There will be no ndiswrapper for UPupBB with kernel 4.9 unless somebody else can produce a working version.
I've now got an .inf file for the wifi in my laptop so I can test. It works with an old slacko kernel and ndiswrapper.
ndiswrapper compiles ok but crashes when run under kernel 4.9
I can't find any relevant patches.
Sorry! There will be no ndiswrapper for UPupBB with kernel 4.9 unless somebody else can produce a working version.
ath9k: ath9k: Driver unloaded
ndiswrapper: loading out-of-tree module taints kernel.
ndiswrapper: module verification failed: signature and/or required key missing - tainting kernel
Disabling lock debugging due to kernel taint
ndiswrapper: module license taints kernel.
ndiswrapper version 1.62 loaded (smp=yes, preempt=no)
udevd[3418]: Specified group 'input' unknown
udevd[3418]: /etc/udev/rules.d/55-cups.rules:5: NAME="%k" is ignored, because it breaks kernel supplied names; please remove
BUG: unable to handle kernel paging request at f9e89890
IP: [<f9e89890>] 0xf9e89890
*pdpt = 0000000001cbf001 *pde = 000000002d5e4067
*pte = 800000011f998163
Oops: 0011 [#1] SMP
Modules linked in: ndiswrapper(OE+) coretemp hwmon iptable_filter ip_tables fan snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev media rtsx_pci_sdmmc rtsx_pci_ms snd_pcsp snd_hda_intel snd_hda_codec snd_hda_core snd_pcm_oss snd_mixer_oss ath9k_common ath9k_hw sg snd_seq_dummy snd_pcm ath mac80211 snd_seq_oss cfg80211 rfkill snd_seq_midi rtsx_pci r8169 mii snd_seq_midi_event i2c_i801 snd_rawmidi i2c_smbus i915 snd_seq lpc_ich snd_seq_device snd_timer snd i2c_algo_bit drm_kms_helper soundcore syscopyarea sysfillrect sysimgblt fb_sys_fops drm wmi battery ac [last unloaded: ath9k]
CPU: 0 PID: 12417 Comm: loadndisdriver Tainted: P OE 4.9.96-lxpup-32-pae #1
Hardware name: ASUSTeK COMPUTER INC. X551MA/X551MA, BIOS X551MA.513 09/09/2014
task: f4cbec80 task.stack: ed7a8000
EIP: 0060:[<f9e89890>] EFLAGS: 00010286 CPU: 0
EIP is at 0xf9e89890
EAX: f9e89890 EBX: ed646720 ECX: 00000001 EDX: 0020f100
ESI: ed64673c EDI: ed799808 EBP: f9dafd68 ESP: ed7a9e30
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 80050033 CR2: f9e89890 CR3: 2fe2d620 CR4: 001006f0
Stack:
f9d7aca3 ed646720 ed64673c ed7a9e5c ed7a9e58 f9dac000 00000028 ed799888
effe5038 ed646720 effe500c 4d36e972 c113b721 c18fa648 eb9a4280 c14546b1
c18fa648 eb99ae38 c145795d 00000000 00000000 eb9a4280 00000000 efd26010
Call Trace:
[<f9d7aca3>] ? wrapper_ioctl+0x833/0xab0 [ndiswrapper]
[<c113b721>] ? path_lookupat+0x101/0x110
[<c18fa648>] ? down_write+0x8/0x30
[<c14546b1>] ? di_write_lock+0x11/0x30
[<c18fa648>] ? down_write+0x8/0x30
[<c145795d>] ? au_reval_and_lock_fdi+0x6d/0x6a0
[<c18fa618>] ? down_read+0x8/0x30
[<c1459210>] ? test_empty_cb+0xf0/0xf0
[<c14d7835>] ? __copy_to_user_ll+0x55/0x60
[<f9d7a470>] ? unload_wrap_driver+0x120/0x120 [ndiswrapper]
[<c113ffae>] ? do_vfs_ioctl+0x7e/0x700
[<c11488a7>] ? touch_atime+0x17/0x90
[<c11406c0>] ? iterate_dir+0x40/0x180
[<c1140c26>] ? SyS_getdents+0x66/0xe0
[<c1140900>] ? fillonedir+0x100/0x100
[<c114065e>] ? SyS_ioctl+0x2e/0x50
[<c100142c>] ? do_fast_syscall_32+0x8c/0x150
[<c18fc263>] ? sysenter_past_esp+0x40/0x6a
Code: c6 86 46 53 00 00 01 81 88 2c 07 00 00 00 00 01 00 56 e8 f4 fb ff ff 68 c0 93 f4 f9 e8 ba 9d fd ff 83 c4 04 5f 5e 5b c2 04 00 cc <81> ec 80 00 00 00 8b 8c 24 88 00 00 00 8b 84 24 84 00 00 00 53
EIP: [<f9e89890>]
0xf9e89890
SS:ESP 0068:ed7a9e30
CR2: 00000000f9e89890
---[ end trace 67c07d7f111d701b ]---
ndiswrapper (load_wrap_driver:103): couldn't load driver netathw; check system log for messages from 'loadndisdriver'
usbcore: registered new interface driver ndiswrapper
# loadndisdriver -v
version: 1.9
# ndiswrapper -v
utils version: '1.9', utils version needed by module: '1.9'
module details:
filename: /lib/modules/4.9.96-lxpup-32-pae/misc/ndiswrapper.ko
version: 1.62
vermagic: 4.9.96-lxpup-32-pae SMP mod_unload modversions 686
# ndiswrapper -l
netathw : driver installed
device (168C:0032) present (alternate driver: ath9k)
#
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
- perdido
- Posts: 1528
- Joined: Mon 09 Dec 2013, 16:29
- Location: ¿Altair IV , Just north of Eeyore Junction.?
Shinobar has a new sfs of nvidia x86 390.97 for bionic beaver with kernel 4.9.96
Click this link to see which cards it supports
https://www.nvidia.com/download/driverR ... 7418/en-us
The sfs is available here
http://shinobar.server-on.net/puppy/opt/pup5/bionic/
.
Click this link to see which cards it supports
https://www.nvidia.com/download/driverR ... 7418/en-us
The sfs is available here
http://shinobar.server-on.net/puppy/opt/pup5/bionic/
.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64