Got it. Many thanks.peebee (in part) wrote:Pre-release....
UPupEE-19.10-PR1
Sheldon
Got it. Many thanks.peebee (in part) wrote:Pre-release....
UPupEE-19.10-PR1
Code: Select all
System: Host: puppypc25146 Kernel: 4.14.141-lxpup-32-pae i686 bits: 32 Desktop: JWM 2.3.7
Distro: UPupEE 19.10
Machine: Device: laptop System: FUJITSU product: LIFEBOOK S761 serial: R1Y00453
Mobo: FUJITSU model: FJNB225 serial: N/A
UEFI [Legacy]: FUJITSU // Phoenix v: Version 1.17 date: 03/14/2012
Battery CMB1: charge: 72.4 Wh 100.0% condition: 72.4/72.4 Wh (100%)
CPU: Dual core Intel Core i5-2520M (-HT-MCP-) speed/max: 910/3200 MHz
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
Display Server: X.Org 1.20.5 drivers: modesetting (unloaded: fbdev,vesa) Resolution: 1366x768@60.00hz
OpenGL: renderer: Mesa DRI Intel Sandybridge Mobile x86/MMX/SSE2 version: 3.3 Mesa 19.1.6
Network: Card: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) driver: ath9k
Drives: HDD Total Size: NA (-)
Info: Processes: 148 Uptime: 27 min Memory: 265.3/5894.9MB Client: Shell (bash) inxi: 2.3.40
Code: Select all
l1tf:Mitigation: PTE Inversion
mds:Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
meltdown:Vulnerable
spec_store_bypass:Vulnerable
swapgs barriers and __user pointer sanitization
spectre_v2:Mitigation: Full generic retpoline, STIBP: disabled, RSB filling
That's odd - works fine for me - what are you trying to play? Are there any errors if you run in a terminal??watchdog wrote:The built-in mplayer does not work for me.
In a live session:peebee wrote:That's odd - works fine for me - what are you trying to play? Are there any errors if you run in a terminal??watchdog wrote:The built-in mplayer does not work for me.
Code: Select all
# mplayer /mnt/sda1/homepup/Save/Part1.mp4
MPlayer 1.4-9 (C) 2000-2019 MPlayer Team
Playing /mnt/sda1/homepup/Save/Part1.mp4.
MPlayer interrupted by signal 4 in module: open_stream
- MPlayer crashed by an 'Illegal Instruction'.
It usually happens when you run it on a CPU different than the one it was
compiled/optimized for.
Verify this!
- MPlayer crashed by bad usage of CPU/FPU/RAM.
Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
#
Code: Select all
System: Host: puppypc10074 Kernel: 4.14.141-lxpup-32-pae i686 (32 bit) Desktop: JWM 2.3.7
Distro: UPupEE 19.10
Machine: Device: laptop System: Hewlett-Packard product: HP 530 Notebook PC v: F.07 serial: CND8160FHM
Mobo: Hewlett-Packard model: 30D5 v: KBC Version 82.15
BIOS: Hewlett-Packard v: 68MVU Ver. F.07 date: 03/18/2008
Battery C1AC: charge: 19.2 Wh 96.0% condition: 20.0/20.0 Wh (100%)
CPU: Single core Intel Celeron M 520 (-UP-) cache: 1024 KB speed/max: 1065/1600 MHz
Graphics: Card: Intel Mobile 945GSE Express Integrated Graphics Controller
Display Server: X.org 1.20.5 driver: intel
tty size: N/A Advanced Data: N/A for root
Audio: Card-1 Intel NM10/ICH7 Family High Definition Audio Controller
driver: snd_hda_intel
Card-2 Generic USB TO IDE Bridge driver: USB Audio
Sound: Advanced Linux Sound Architecture v: k4.14.141-lxpup-32-pae
Network: Card-1: Intel 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile
driver: e100
IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:1e:ec:23:fd:95
Card-2: Broadcom and subsidiaries BCM4312 802.11b/g LP-PHY driver: b43-pci-bridge
IF: wlan0 state: down mac: 00:21:00:09:91:98
Drives: HDD Total Size: 280.1GB (0.4% used)
ID-1: /dev/sda model: TOSHIBA_MK1246GS size: 120.0GB
ID-2: USB /dev/sdb model: USB_Disk size: 160.0GB
Partition: ID-1: swap-1 size: 1.07GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 119 Uptime: 20 min Memory: 288.4/1498.2MB
Client: Shell (urxvt) inxi: 2.3.8
Solved, thanks! But...:peebee wrote:@watchdog @OscarTalks
MPlayer - my bad - sorry - wrong local petbuild used - now fixed in PR1->PR3 delta.
Code: Select all
# mplayer /mnt/home/homepup/Save/Part1.mp4
MPlayer 1.4-9 (C) 2000-2019 MPlayer Team
Playing /mnt/home/homepup/Save/Part1.mp4.
libavformat version 58.27.102 (internal)
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x1579280]Protocol name not provided, cannot determine if input is local or a network protocol, buffers and access patterns cannot be configured optimally without knowing the protocol
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (aac), -aid 0, -alang und
VIDEO: [H264] 640x480 24bpp 25.000 fps 697.8 kbps (85.2 kbyte/s)
Failed to open VDPAU backend libvdpau_va_gl.so: cannot open shared object file: No such file or directory
[vdpau] Error when calling vdp_device_create_x11: 1
Using the pr1 release and found /usr/local/petget/check_deps.shpeebee wrote:Pre-release....
UPupEE-19.10-PR1 + delta to PR6
md5 = 047b70402709e5ed837e12c234a24614 upupee-19.10-PR6-uefi.iso
I just got the PR6 delta, generated new iso, put essential files in directory, booted without save directory.darry19662018 (in part) wrote:Using the pr1 release and found /usr/local/petget/check_deps.shpeebee (in part) wrote: UPupEE-19.10-PR1 + delta to PR6
wasn't working had this read out in terminal...# /usr/local/petget/check_deps.sh
/usr/local/petget/check_deps.sh: line 26: /tmp/petget_proc/missinglibs.txt: No such file or directory ...
Code: Select all
checkdeps -system
peebee, sorry if I said something unclear: I was not trying to achieve.peebee (in part) wrote:.. @sheldonisaac
What are you trying to achieve by running that component of PPM stand-alone??
If you want to check the system for missing dependenices run:Does PPM work as expected?Code: Select all
checkdeps -system
Code: Select all
checkdeps -system
Feature works in busterpup - I have always clicked deps in a package and I see it is now in pupcontrol panel - Just expected it would it work.peebee wrote:@darry19662018 @sheldonisaac
What are you trying to achieve by running that component of PPM stand-alone??
If you want to check the system for missing dependencies run:Does PPM work as expected?Code: Select all
checkdeps -system
Thanks
Code: Select all
System: Host: puppypc25146 Kernel: 4.14.141-lxpup-32-pae i686 bits: 32 Desktop: JWM 2.3.7
Distro: UPupEE 19.10
Machine: Device: laptop System: FUJITSU product: LIFEBOOK S761 serial: R1Y00453
Mobo: FUJITSU model: FJNB225 serial: N/A
UEFI [Legacy]: FUJITSU // Phoenix v: Version 1.17 date: 03/14/2012
Battery CMB1: charge: 68.0 Wh 94.0% condition: 72.4/72.4 Wh (100%)
CPU: Dual core Intel Core i5-2520M (-HT-MCP-) speed/max: 840/3200 MHz
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
Display Server: X.Org 1.20.5 drivers: modesetting (unloaded: fbdev,vesa) Resolution: 1366x768@60.00hz
OpenGL: renderer: Mesa DRI Intel Sandybridge Mobile x86/MMX/SSE2 version: 3.3 Mesa 19.2.0
Network: Card: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) driver: ath9k
Drives: HDD Total Size: NA (-)
Info: Processes: 202 Uptime: 7 min Memory: 168.1
Code: Select all
brightness=`cat /sys/class/backlight/acpi_video0/max_brightness`
echo $brightness > /sys/class/backlight/acpi_video0/brightness
sed -i '/save2flash/d' /root/Choices/ROX-Filer/PuppyPin