I've a problem here, I've installed xenial puppy 7.5 in a partition of my hard drive called sda4, in sda 3 I've windows 10 and I don't want to modify the mbr of windows so the alternative is to install grub in the same partition of the puppy installation
Then the live CD offers to install grub4Dos, when I select the partition of puppy (PBS) and after that I press the Ok button, then en "Grub4DosConfig - List of fetected operating systems it shows Frugal installed Puppy at the left side of the window and in the right side of the window it shows the windows operatind systems like follows:
1st line: Windows
2nd line: Windows (sda1)
3rd line: Windows (sda3)
I click the ok button and it shows a message saying "Confirmation: the boot loader (Grub4Dos) will be installed on: sda4"
i press "Ok" again and after several seconds it shows another message saying that it was an error, the log says this:
Code: Select all
/usr/sbin/grub4dosconfig PBS
version 1.9.2
Mon Nov 18 10:54:15 +08 2019
BINSTALLER=bootlace.com
298.1GiB
1036288
11878400
267737088
31918080
3.9GiB
4029376
sda|298kB_ATA_SAMSUNG_HM321HI
sda1|(ntfs)_1012MB_System
sda2|(ntfs)_11.3GB_Recovery
sda3|(ntfs)_255.3GB_OS
sda4|(ext2)_30.4GB_Linux
sdb|3kB_Generic_STORAGE_DEVICE
sdb1|(vfat)_3.8GB_MYLINUXLIVE
PCPARTS:
/dev/sda1|ntfs|1036288
/dev/sda2|ntfs|11878400
/dev/sda3|ntfs|267737088
/dev/sda4|ext2|31918080
/dev/sdb1|vfat|4029376
LPART:/dev/sda4|ext2|31918080
MYPUPPY=sdb1/puppy_xenialpup_7.5.sfs
sdb1/puppy_xenialpup_7.5.sfs,initrd.gz|puppy_xenialpup_7.5
sda1/bootmgr|Windows
sda3/bootmgr|Windows
sda4/menu.lst|Puppy_xenialpup_7.5_(sdb1)
WIN:sda1/bootmgr|Windows
WIN:sda3/bootmgr|Windows
Writing... /mnt/sda4/menu.lst
sdb1/puppy_xenialpup_7.5.sfs,initrd.gz|puppy_xenialpup_7.5
:Windows:
:Windows (sda1):
:Windows (sda3):
Installing grldr ...
'/usr/lib/grub4dos/grldr' -> '/mnt/sda4/grldr'
/dev/sda4 561305600 625141759 63836160 30.5G 83 Linux
Installing bootloader on /dev/sda4(PBS)...
Error: More than one files specified.
BOOTLACE writes GRLDR BOOT RECORD to MBR or to the boot area of a file system.
Usage: bootlace.com [OPTIONS] DEVICE_OR_FILE
Options: --read-only, --floppy[=N], --boot-prevmbr-first, --boot-prevmbr-last,
--no-backup-mbr, --force-backup-mbr, --mbr-enable-floppy, --mbr-disable-floppy,
--mbr-enable-osbr, --mbr-disable-osbr, --duce, --time-out=T, --hot-key=K,
--preferred-drive=D, --preferred-partition=P, --sectors-per-track=S, --heads=H,
--start-sector=B, --total-sectors=C, --install-partition=I, --lba, --chs,
--fat12, --fat16, --fat32, --vfat, --ntfs, --ext2, --serial-number=SN,
--restore-mbr, --mbr-no-bpb, --chs-no-tune
DEVICE_OR_FILE: Filename of the device or image. For DOS, a BIOS drive number
(in hex 0xHH or decimal DDD format)can be used to access the drive.
Failed to install bootlace.com.
/dev/sda Bootalbe: yes,
Can you help solve this problem?