Thanks, that fix is very useful to know. Perhaps that fix could be put in permanently, in woofQ.jamesbond wrote:You can. But you can't do it with /etc/asound.conf. You need to do it with /etc/modprobe.conf because the order is set at module-load time (i.e, at boot time).williams2 wrote:I think you can create software cards in /etc/asound.conf
which can change the card numbers.
I don't know whether that could change the order of the "hardware" cards.
Here is mine:Without anything, I will get HDMI as the 'card 0' and the analog soundcard as 'card 1', which is no good because I don't have a TV connected to my HDMI port.Code: Select all
# lspci -d ::0403 04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 15de 04:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Device 15e3 # aplay -l | grep '^card ' card 0: Generic [HD-Audio Generic], device 0: ALC255 Analog [ALC255 Analog] card 1: HDMI [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
To swap it, this is what I use in /etc/modprobe.conf.d/swap-card.conf:Code: Select all
options snd-hda-intel id=HDMI index=1
EasyOS version 2.3.2, June 22, 2020
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
[url]https://bkhome.org/news/[/url]
I have a nvidia gtx1030 card in PCIe bus and I run fatdog64 802BarryK wrote: I don't know anything about NVIDIA audio, hence these basic questions!
I have it connected to HDMI monitor but it has no audio speaker.
alsamixer output shows nvidia HDMI output as well as intel sound chip hw:0,
but if I choose nvidia sound output there is no sound but I haven't
properly checked with a TV.
So of course I choose the intel chip.
(But I've never checked it for HDMI sound using my TV, only my computer line-out and headphones)
Raspberry pi supports HDMI sound but it's an entirely different architecture.
So I play raspberry pi card sound on my TV.
By the way I also have nvidia video driver working with fatdog64 at same time for acceleration.
________________________________________
XFCE desktop replacement
Hi everyone,
Does anyone have a how-to document to replace the standard desktop with another one ? I'm trying to install XFCE and remove all the un-needed stuff but i'm quite lost in here. I hope to build a good looking build but I also want to get rid with the stuff not used anymore.
By the way is there a thread somewhere for EasyOS Buster derivatives builds like there are for puppy ?
Kind regards
Does anyone have a how-to document to replace the standard desktop with another one ? I'm trying to install XFCE and remove all the un-needed stuff but i'm quite lost in here. I hope to build a good looking build but I also want to get rid with the stuff not used anymore.
By the way is there a thread somewhere for EasyOS Buster derivatives builds like there are for puppy ?
Kind regards
Here is EasyOS website: https://easyos.org/
If you want Puppy with XFCE, why not to try this one first: http://murga-linux.com/puppy/viewtopic.php?t=117201
It is Debian Buster compatible, just like EasyOS 2.2
If you want Puppy with XFCE, why not to try this one first: http://murga-linux.com/puppy/viewtopic.php?t=117201
It is Debian Buster compatible, just like EasyOS 2.2
Nvidia sound doesn't work
continuing this post
I connected my TV to my computer using HDMI cable....
I did a check of the HDMI sound output from a NVIDIA gtx 1030 card,
and as I suspected there is no sound transmitted on HDMI cable, just video.
I did hear one click noise when I tried to play a video file.
Alsamixer said the sound is 'OFF' and I can't change the setting using
alsamixer.
Raspberry pi does work with this TV.
------------------------------------------------------
Image shows alsamixer output....
I also checked a USB sound card dongle (which does work) to see how it is reported.
The command 'lsusb' doesn't mention the dongle but does mention a bluetooth dongle.
The command 'lspci' does mention 'NVIDIA Corporation GP108 High Definition Audio'
________________________________________
I connected my TV to my computer using HDMI cable....
I did a check of the HDMI sound output from a NVIDIA gtx 1030 card,
and as I suspected there is no sound transmitted on HDMI cable, just video.
I did hear one click noise when I tried to play a video file.
Alsamixer said the sound is 'OFF' and I can't change the setting using
alsamixer.
Raspberry pi does work with this TV.
------------------------------------------------------
Image shows alsamixer output....
I also checked a USB sound card dongle (which does work) to see how it is reported.
The command 'lsusb' doesn't mention the dongle but does mention a bluetooth dongle.
The command 'lspci' does mention 'NVIDIA Corporation GP108 High Definition Audio'
________________________________________
Code: Select all
# lsusb
Bus 002 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 002 Device 008: ID 8086:0808 Intel Corp.
Bus 002 Device 007: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 002 Device 005: ID 05dc:a209 Lexar Media, Inc. JumpDrive S70
Bus 002 Device 004: ID 056a:0065 Wacom Co., Ltd MTE-450 [Bamboo]
Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Code: Select all
# lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
00:1f.0 ISA bridge: Intel Corporation Q67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GP108 [GeForce GT 1030] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GP108 High Definition Audio Controller (rev a1)
#
- Attachments
-
- screenshot-usb-sound.png
- (30.14 KiB) Downloaded 699 times
Good evening,
with the system just started I see the following connection in the ipinfo statistics tab:
To be precise I noticed this connection after installing firefox_60.8.0-esr-buster_amd64.sfs as a container.
Best regards
with the system just started I see the following connection in the ipinfo statistics tab:
the connection 104.20.16.242 seems to be cloudflare related, it only happens to me with easy-2.2, on the other puppies that I use, when the system is just started, I get the following:tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN
tcp 0 0 192.168.1.166:53124 104.20.16.242:80 TIME_WAIT
tcp6 0 0 ::1:631 :::* LISTEN
Does it happen to someone else?tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN
tcp6 0 0 ::1:631 :::* LISTEN
To be precise I noticed this connection after installing firefox_60.8.0-esr-buster_amd64.sfs as a container.
Best regards
[b]We are waves of the same sea, leaves of the same tree, flowers of the same garden.[/b]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
I have improved sound profiling:
https://bkhome.org/news/202001/improved ... audio.html
It does have a limitation, cannot distinguish between computers with exactly the same sound chip.
I might be able to handle that. I need to see if any of my computers have the same chip -- I don't think so though, as they are of very different vintages.
https://bkhome.org/news/202001/improved ... audio.html
It does have a limitation, cannot distinguish between computers with exactly the same sound chip.
I might be able to handle that. I need to see if any of my computers have the same chip -- I don't think so though, as they are of very different vintages.
[url]https://bkhome.org/news/[/url]
Yes, thank you, but I could'nt find a tutorial explaining how to get this result and I would like to learn how to do it and train myself. I think it is very important to be able to do it ourselves as well as rely on the work of others, because we could teach kids and share knowledge.Auronius wrote:Here is EasyOS website: https://easyos.org/
If you want Puppy with XFCE, why not to try this one first: http://murga-linux.com/puppy/viewtopic.php?t=117201
It is Debian Buster compatible, just like EasyOS 2.2
Kind regards.
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: XFCE desktop replacement
By "builds" do you mean that you want to build your own EasyOS derivative?lvds wrote:Hi everyone,
Does anyone have a how-to document to replace the standard desktop with another one ? I'm trying to install XFCE and remove all the un-needed stuff but i'm quite lost in here. I hope to build a good looking build but I also want to get rid with the stuff not used anymore.
By the way is there a thread somewhere for EasyOS Buster derivatives builds like there are for puppy ?
Kind regards
Easy is built with woofQ. There is no forum thread, there is only a tarball download, which has some docs in it. Intended for experienced developers, no hand-holding. Hosted here:
http://distro.ibiblio.org/easyos/project/woof/
I usually upload a new tarball whenever there is a new release.
Or, if you want to remaster EasyOS to produce your own variant, it can be done, but there is no documenation.
Easy is pretty much tied into using JWM and ROX-Filer. XFCE is possible but would be a lot of work.
So I recommend go for Puppy, and it is already done, there are XFCE-based puppies.
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
OK. The word to search for is "remastering", for example:lvds wrote:Yes, thank you, but I could'nt find a tutorial explaining how to get this result and I would like to learn how to do it and train myself. I think it is very important to be able to do it ourselves as well as rely on the work of others, because we could teach kids and share knowledge.Auronius wrote:Here is EasyOS website: https://easyos.org/
If you want Puppy with XFCE, why not to try this one first: http://murga-linux.com/puppy/viewtopic.php?t=117201
It is Debian Buster compatible, just like EasyOS 2.2
Kind regards.
http://wikka.puppylinux.com/Remastering
[url]https://bkhome.org/news/[/url]
Great thank you very much. I was considering buying a chromebook because of the january sales here and was planning to reformat it for using puppy or EasyOs, but after reading this thread i wonder if this is still a good idea. Is there any hardware problem at running EasyOs on a chromebook ? which chromebook would be the best choice (whatever the price) ?BarryK wrote:OK. The word to search for is "remastering", for example:lvds wrote:Yes, thank you, but I could'nt find a tutorial explaining how to get this result and I would like to learn how to do it and train myself. I think it is very important to be able to do it ourselves as well as rely on the work of others, because we could teach kids and share knowledge.Auronius wrote:Here is EasyOS website: https://easyos.org/
If you want Puppy with XFCE, why not to try this one first: http://murga-linux.com/puppy/viewtopic.php?t=117201
It is Debian Buster compatible, just like EasyOS 2.2
Kind regards.
http://wikka.puppylinux.com/Remastering
Kind regards,
Laurent.
It is possible to find the USB sound card on fatdog64 .
It doesn't give manufacturer name.
I haven't tested with EASY.
It doesn't give manufacturer name.
I haven't tested with EASY.
Code: Select all
# aplay -l | grep '^card '
card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
card 2: Device [USB PnP Sound Device], device 0: USB Audio [USB Audio]
# lspci -d ::0403
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
01:00.1 Audio device: NVIDIA Corporation GP108 High Definition Audio Controller (rev a1)
#
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
This might help you to determine if a sound card is pci or usb, by looking at the path:don570 wrote:It is possible to find the USB sound card on fatdog64 .
It doesn't give manufacturer name.
I haven't tested with EASY.Code: Select all
# aplay -l | grep '^card ' card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog] card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] card 2: Device [USB PnP Sound Device], device 0: USB Audio [USB Audio] # lspci -d ::0403 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 01:00.1 Audio device: NVIDIA Corporation GP108 High Definition Audio Controller (rev a1) #
Code: Select all
# readlink /sys/class/sound/card[0-9]
[url]https://bkhome.org/news/[/url]
RE: remastering
https://bkhome.org/linux/easyos-a-simpl ... ution.html
https://bkhome.org/linux/easyos-a-simpl ... ution.html
Barry, Does your fundamental rethinking include features already found in Easy that might offer practical alternatives to remastering?EasyOS, a simple and secure Linux distribution
January 06, 2019 — BarryK
EasyOS, also known as Easy OS, Easy Linux, or just "Easy", is an experimental distribution, a "new paradigm"; a blend of the best ideas from Puppy and Quirky, and a fundamental rethink of the security, maintainability and ease-of-use.
RAS
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
I am getting forgetful in my dotage ...actually, I have always been forgetful, I remember my dad telling me that I would lose my head if it wasn't screwed on.ras wrote:RE: remastering
https://bkhome.org/linux/easyos-a-simpl ... ution.htmlBarry, Does your fundamental rethinking include features already found in Easy that might offer practical alternatives to remastering?EasyOS, a simple and secure Linux distribution
January 06, 2019 — BarryK
EasyOS, also known as Easy OS, Easy Linux, or just "Easy", is an experimental distribution, a "new paradigm"; a blend of the best ideas from Puppy and Quirky, and a fundamental rethink of the security, maintainability and ease-of-use.
Anyway, Easy has menu "Setup -> Remaster Easy Linux". I did this ages ago, in the early days of easy, and completely forgot it is there.
This creates a new 'easy.sfs'. menu "Setup -> Remove inbuilt packages" can be used to ewmove whatever you don't want, then you install what you want, then you create the new easy.sfs.
Just trying it now, interesting. If you you want to see what it actually does, the menu entry runs /usr/sbin/easy-remaster
So, EasyOS DOES SUPPORT REMASTERING!
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
If you don't have any alsa configuration at all, no asound.conf, nothing to affect snd module parameters, etc., will alsa always default to using card 0 and device 0 for sound output? and ctrl 0?jamesbond wrote:You can. But you can't do it with /etc/asound.conf. You need to do it with /etc/modprobe.conf because the order is set at module-load time (i.e, at boot time).williams2 wrote:I think you can create software cards in /etc/asound.conf
which can change the card numbers.
I don't know whether that could change the order of the "hardware" cards.
Here is mine:Without anything, I will get HDMI as the 'card 0' and the analog soundcard as 'card 1', which is no good because I don't have a TV connected to my HDMI port.Code: Select all
# lspci -d ::0403 04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 15de 04:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Device 15e3 # aplay -l | grep '^card ' card 0: Generic [HD-Audio Generic], device 0: ALC255 Analog [ALC255 Analog] card 1: HDMI [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
To swap it, this is what I use in /etc/modprobe.conf.d/swap-card.conf:Code: Select all
options snd-hda-intel id=HDMI index=1
Also, there doesn't seem to be any utility that will return the current default card, device and ctrl numbers. I suppose it is possible to find that info in /sys/sound?
[url]https://bkhome.org/news/[/url]
EasyOS Pyro 1.3, Buster 2.2.3, December 27, 2019
Installed to a 32gb flash drive with easydd:
Summary
Computer
Processor 2x Pentium(R) Dual-Core CPU E5200 @ 2.50GHz
Memory 4037MB (264MB used)
Machine Type Physical machine
Operating System Easy Buster64
User Name root (root)
Date/Time Fri Jan 17 23:14:44 2020
Display
Resolution 1920x1080 pixels
OpenGL Renderer NVC1
X11 Vendor The X.Org Foundation
VGA compatible controller NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
(prog-if 00 [VGA controller])
Audio Devices
Audio Adapter HDA-Intel - HDA Intel (using this one)
Audio Adapter HDA-Intel - HDA NVidia
I used sfsget to install the devx amd kernel source sfs, attempted to install the
proprietary nvidia driver but had no success with that,
(may have used the wrong method?)
The nouveau driver is working okay for watching videos on youtube etc.
Summary
Computer
Processor 2x Pentium(R) Dual-Core CPU E5200 @ 2.50GHz
Memory 4037MB (264MB used)
Machine Type Physical machine
Operating System Easy Buster64
User Name root (root)
Date/Time Fri Jan 17 23:14:44 2020
Display
Resolution 1920x1080 pixels
OpenGL Renderer NVC1
X11 Vendor The X.Org Foundation
VGA compatible controller NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
(prog-if 00 [VGA controller])
Audio Devices
Audio Adapter HDA-Intel - HDA Intel (using this one)
Audio Adapter HDA-Intel - HDA NVidia
I used sfsget to install the devx amd kernel source sfs, attempted to install the
proprietary nvidia driver but had no success with that,
(may have used the wrong method?)
The nouveau driver is working okay for watching videos on youtube etc.
- Attachments
-
- capture16222.jpg
- (64.3 KiB) Downloaded 334 times
Thank you very much !! I love itBarryK wrote:I am getting forgetful in my dotage ...actually, I have always been forgetful, I remember my dad telling me that I would lose my head if it wasn't screwed on.ras wrote:RE: remastering
https://bkhome.org/linux/easyos-a-simpl ... ution.htmlBarry, Does your fundamental rethinking include features already found in Easy that might offer practical alternatives to remastering?EasyOS, a simple and secure Linux distribution
January 06, 2019 — BarryK
EasyOS, also known as Easy OS, Easy Linux, or just "Easy", is an experimental distribution, a "new paradigm"; a blend of the best ideas from Puppy and Quirky, and a fundamental rethink of the security, maintainability and ease-of-use.
Anyway, Easy has menu "Setup -> Remaster Easy Linux". I did this ages ago, in the early days of easy, and completely forgot it is there.
This creates a new 'easy.sfs'. menu "Setup -> Remove inbuilt packages" can be used to ewmove whatever you don't want, then you install what you want, then you create the new easy.sfs.
Just trying it now, interesting. If you you want to see what it actually does, the menu entry runs /usr/sbin/easy-remaster
So, EasyOS DOES SUPPORT REMASTERING!
Now we need a thread "My EasyOs is better looking than yours !" where everyone will post screenshots. Probably the best video game ever
Kind regards,
Laurent.