Mozilla only app able to connect thru proxy server
you had an internet connection setup before
if it isn't working now, set it up again the same way
then try:
click Home on the desktop to run rox file manager
click the up arrow on the left a few times
click the etc folder
right click profile and click Copy ... press the right-arrow key then type .local (to copy the file profile to profile.local
right click profile and click Open As Text
type in this, changing the ip numbers to the correct ones:
or you can copy it from this page and paste it into the text editor ... mark the text with the mouse to copy, click the middle mouse button to paste
save the file (click File ... or press ctrl+S then ctrl+Q)
reboot
hopefully, some of your programs should now work with your proxy ... it works with Dillo and Privoxy, i didn't test it with anything else
the instructions sound complicated, but you are just making a file with 3 lines in it then rebooting
if it isn't working now, set it up again the same way
then try:
click Home on the desktop to run rox file manager
click the up arrow on the left a few times
click the etc folder
right click profile and click Copy ... press the right-arrow key then type .local (to copy the file profile to profile.local
right click profile and click Open As Text
type in this, changing the ip numbers to the correct ones:
Code: Select all
export https_proxy=http://111.111.111.111:8088
export http_proxy=http://111.111.111.111:8088
export ftp_proxy=http://111.111.111.111:8088
save the file (click File ... or press ctrl+S then ctrl+Q)
reboot
hopefully, some of your programs should now work with your proxy ... it works with Dillo and Privoxy, i didn't test it with anything else
the instructions sound complicated, but you are just making a file with 3 lines in it then rebooting
Dear GuestTooERROR: 11 IS UNREACHABLE!
...are you connected to the Internet?
...maybe that site is down? Try another.
You have chosen to install these packages in Puppy:
"abs-0.908"
Please connect to the Internet then press a button to choose download site.
If you click on "Local" button, the packages must already be downloaded,
that is, somewhere local.
I did what you advised, and tried to download a package usin Pupget Package Manager. Above is the response I got from it.
Any more ideas guys. It's really getting to a point where I am just gonna Flip out.
When it comes to Puget Packages, I just download them using my Browser to a local directory and Use PupGet Package Manager with Alien option, but what do I do to download my Mail from my POP3 mail account. I get the Connection Error Message in Sylpheed and it really satinks, I followed each of the great helping advices from this thread and still not getting anywhere.
I am using Puppy 1.0.4, liveCD running in ramdisk
you could try changing
export ftp_proxy=http://111.111.111.111:8088
to
export ftp_proxy=ftp://111.111.111.111:8088
it might or might not work
you could also try configuring a .wgetrc file in /root
see: here
it's possible that wget is working, but the ping test that pupget does is not working through your proxy ... you could test wget by using it to download a file ... for example,
open a console (rxvt window) and type
wget www.google.com/favicon.ico
and see if it downloads the favicon.ico file or prints error messages
export ftp_proxy=http://111.111.111.111:8088
to
export ftp_proxy=ftp://111.111.111.111:8088
it might or might not work
you could also try configuring a .wgetrc file in /root
see: here
it's possible that wget is working, but the ping test that pupget does is not working through your proxy ... you could test wget by using it to download a file ... for example,
open a console (rxvt window) and type
wget www.google.com/favicon.ico
and see if it downloads the favicon.ico file or prints error messages
This is what i get in response
BusyBox v0.60.5 (2004.09.18-02:04+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
# wget http://www.google.com/favicon.ico
--22:37:26-- http://www.google.com/favicon.ico
=> `favicon.ico'
Resolving www.google.com... failed: Host not found.
#
wget is what pupget uses to download filespitbos wrote:# wget http://www.google.com/favicon.ico
resolving www.google.com... failed: Host not found
wget is using http protocol to download favicon.ico from google ... that same as Mozilla
basically, wget is trying to get the file directly from the internet and is not using your proxy
when i type in a console (rxvt window):
export http_proxy=http://111.111.111.111:8088
wget http://www.google.com/favicon.ico
it tries to use that proxy (it doesn't work of course, i don't have a proxy there to use)
--14:18:45-- http://www.google.com/favicon.ico
=> `favicon.ico'
Connecting to 111.111.111.111:8088...
the method does seem to work
are you sure you have http_proxy setup?
what do you get if you type in a console:
set | grep -i proxy
pupget might work if you type this in a console:
export http_proxy=http://111.111.111.111:8088
pupget
(using the correct proxy address of course)
pitbos wget does work with the proxy variable. I installed a localhost proxy yesterday
Here is the input
----------------------------------------------
Here is the output
As far as your computer is concerned, the guy is apparently not providing you with DHCP. It may be the only thing he is providing you is an HTTP proxy.
If true, then you are limited to HTTP. I think most programs that use HTTP will use the variable. I think programs that have entries for setting up a proxy like Mozilla, may not use it, but that's not a problem.
Sincerely, it appears you are expecting more than what is made available to you by the host. Also I don't think you have your http_proxy environment set, but that is beside the major point I wish to make, which is: maybe all you got is an HTTP proxy available to you.
Here is the input
----------------------------------------------
Here is the output
- wget http://www.google.com/favicon.ico
--11:59:42-- http://www.google.com/favicon.ico
=> `favicon.ico'
Connecting to 127.0.0.1:9090... connected.
Proxy request sent, awaiting response... 200 OK
Length: 1,406 [image/x-icon]
100%[====================================>] 1,406 1.34M/s ETA 00:00
11:59:44 (1.34 MB/s) - `favicon.ico' saved [1406/1406]
As far as your computer is concerned, the guy is apparently not providing you with DHCP. It may be the only thing he is providing you is an HTTP proxy.
If true, then you are limited to HTTP. I think most programs that use HTTP will use the variable. I think programs that have entries for setting up a proxy like Mozilla, may not use it, but that's not a problem.
Sincerely, it appears you are expecting more than what is made available to you by the host. Also I don't think you have your http_proxy environment set, but that is beside the major point I wish to make, which is: maybe all you got is an HTTP proxy available to you.
I tried something I saw in some other thread
I created a file named .wgetrc in /root
I typed http_proxy=http://192.xxx.xxx.xxx:8080
(xxx=quad)
and again used console to download favicon.ico from google and guess what?
It Did
I then started PupGet Manager and tried to install a package from http site
guess what? again
It Did Not
Any ideas ? anyone
I created a file named .wgetrc in /root
I typed http_proxy=http://192.xxx.xxx.xxx:8080
(xxx=quad)
and again used console to download favicon.ico from google and guess what?
It Did
I then started PupGet Manager and tried to install a package from http site
guess what? again
It Did Not
Any ideas ? anyone
ideas? ... yes
you have got wget to work with http protocol thru your proxy ... it probably stiill does not work with ftp protocol ... if you chose the ibiblio website, it is an ftp website and the wget test may be usng ftp protocol, so the wget test in pupget might fail
if you try the nluug.nl site, it uses http protocol and might work
basically, all you have to do to get many of your programs to work with your proxy is to put
export https_proxy=http://xxx.xxx.xxx.xxx:8088
export http_proxy=http://xxx.xxx.xxx.xxx:8088
export ftp_proxy=http://xxx.xxx.xxx.xxx:8088
in the file /etc/profile.local
if the file doesn't exist, you would need to create it
you could put it in /etc/profile, but profile.local is a better place to put it
i'm not sure if
export https_proxy=xxx.xxx.xxx.xxx:8088
would work
i'm not sure if
export ftp_proxy=http://xxx.xxx.xxx.xxx:8088
should be
export ftp_proxy=ftp://xxx.xxx.xxx.xxx:8088
you probably have to setup Sylpheed email in the sylpheed options
you have got wget to work with http protocol thru your proxy ... it probably stiill does not work with ftp protocol ... if you chose the ibiblio website, it is an ftp website and the wget test may be usng ftp protocol, so the wget test in pupget might fail
if you try the nluug.nl site, it uses http protocol and might work
basically, all you have to do to get many of your programs to work with your proxy is to put
export https_proxy=http://xxx.xxx.xxx.xxx:8088
export http_proxy=http://xxx.xxx.xxx.xxx:8088
export ftp_proxy=http://xxx.xxx.xxx.xxx:8088
in the file /etc/profile.local
if the file doesn't exist, you would need to create it
you could put it in /etc/profile, but profile.local is a better place to put it
i'm not sure if
export https_proxy=xxx.xxx.xxx.xxx:8088
would work
i'm not sure if
export ftp_proxy=http://xxx.xxx.xxx.xxx:8088
should be
export ftp_proxy=ftp://xxx.xxx.xxx.xxx:8088
you probably have to setup Sylpheed email in the sylpheed options
Here is how my .wgetrc file looks like
wget http://www.google.com/favicon.ico
wget worked like a charm and downloaded the file to root
Now I tried your idea with /root/.etc/profile.local
No Luck Sylpheed yet
Then I created a file .sylpheedrc in /root and make it look like .wgetrc. the Godforsaken Sylpheed didn't work
What next ?
i opened up console and typedhttp_proxy = 192.168.0.2:8080
ftp_proxy = 192.168.0.2:8080
https_proxy = 192.168.0.2:8080
wget http://www.google.com/favicon.ico
wget worked like a charm and downloaded the file to root
Now I tried your idea with /root/.etc/profile.local
No Luck Sylpheed yet
Then I created a file .sylpheedrc in /root and make it look like .wgetrc. the Godforsaken Sylpheed didn't work
What next ?
- Pizzasgood
- Posts: 6183
- Joined: Wed 04 May 2005, 20:28
- Location: Knoxville, TN, USA
If push comes to shove, use webmail. If your mail service doesn't have a webmail feature, I know there are other sites that can access any POP3 account and load the files to them. They can also access multiple accounts, sort of like an online email-client. The one I used to use also let you change your address, and I played a little prank on my sister and mom with itwhat do I do to download my Mail from my POP3 mail account
[size=75]Between depriving a man of one hour from his life and depriving him of his life there exists only a difference of degree. --Muad'Dib[/size]
[img]http://www.browserloadofcoolness.com/sig.png[/img]
[img]http://www.browserloadofcoolness.com/sig.png[/img]
i've never configured Sylpheed to use a proxy
something like this might (or might not) work:
click Configuration, Preference for Current Account
you can configure Server Information on the basic tab
there are different protocols ... i use pop3
for Server For Receiving you would put the address of your proxy
probably for SMTP Server (send) too
for User ID you would put my-id@my-mail-server.com
you might have to set the port on the advanced tab
something like what they do here, except the address of their proxy is 127.0.0.1, and they only have it setup for receiving
i don't think there's an easier way to do it
something like this might (or might not) work:
click Configuration, Preference for Current Account
you can configure Server Information on the basic tab
there are different protocols ... i use pop3
for Server For Receiving you would put the address of your proxy
probably for SMTP Server (send) too
for User ID you would put my-id@my-mail-server.com
you might have to set the port on the advanced tab
something like what they do here, except the address of their proxy is 127.0.0.1, and they only have it setup for receiving
i don't think there's an easier way to do it
of course, you could download and install another email program, like Thunderbird ... it would probably be easier to configure than Sylpheed ... just put the ip and port in the proxy section of options
i just threw that in for the people reading this thread that might not know about local and external addresses
if the address of your proxy is 192.168.0.2, that is a local ip ... only machines on your local network (lan) can use your proxy
there are proxies that have internet addresses, and anyone connected to the internet can connect to the proxy and use it ... usually they have id's and passwords ... a person might use the proxy to do something disreputable, and records would show that the proxy machine was doing it, and not the person going through the proxy
the point is, it's safe to tell people what the address of your proxy is, if it's a local address like 192.168.0.2
if the address of your proxy is 192.168.0.2, that is a local ip ... only machines on your local network (lan) can use your proxy
there are proxies that have internet addresses, and anyone connected to the internet can connect to the proxy and use it ... usually they have id's and passwords ... a person might use the proxy to do something disreputable, and records would show that the proxy machine was doing it, and not the person going through the proxy
the point is, it's safe to tell people what the address of your proxy is, if it's a local address like 192.168.0.2