Muppy 008.1 Mini + Standard (updated Jan, 22 2008)
files were moved.
use:
Or use Caneries mirror:
Mark
use:
Code: Select all
wget -c --referer=http://puppyisos.org http://puppyisos.org/isos/2008-01-to-06/Muppy-008.1/pfiles/Mini-Muppy-008.1-EN.iso
Code: Select all
wget -c http://puppyfiles.ca/puppyisos/isos/Muppy008.1/Mini-Muppy-008.1-EN.iso
Last edited by MU on Mon 21 Jan 2008, 09:32, edited 1 time in total.
Ok, just managed do get dloads of mini & full 08. Canuck site seems way faster but had multiple interrupted dloads from both including some bad ones. Don't think I got a full dload from mu's site; kept stopping completely (sometimes when almost done..). I used opera for the dloads.
MD5 checks out for both but not getting the same # for the sfs package & got it twice from 2 separate dloads.
- # 85f396fbef8bf3a2899c066da1348693. Could someone verify?
Both sites show that it should be # 39732c5de4d37983227218c8574d4c45
I'll be testing out full 08 on a gateway mt3705 lap with intel dual core mobile pentium (think 1.6) processor, ati radeon xpress 200m graphics & a gig of ram. Wifi is r8185 & I'll be running live cd with a save file to (vista's on it) HD.
MD5 checks out for both but not getting the same # for the sfs package & got it twice from 2 separate dloads.
- # 85f396fbef8bf3a2899c066da1348693. Could someone verify?
Both sites show that it should be # 39732c5de4d37983227218c8574d4c45
I'll be testing out full 08 on a gateway mt3705 lap with intel dual core mobile pentium (think 1.6) processor, ati radeon xpress 200m graphics & a gig of ram. Wifi is r8185 & I'll be running live cd with a save file to (vista's on it) HD.
Last edited by jonyo on Mon 21 Jan 2008, 11:57, edited 3 times in total.
@jonyo
yup..the server has been hammered for the last while....and I need to correct this.
Unfortunately it will cause some problems in East Asia.
I'm still pondering what my solution will be..but probably it's not going to be a happy compromise...sheesh
Eric
yup..the server has been hammered for the last while....and I need to correct this.
Unfortunately it will cause some problems in East Asia.
I'm still pondering what my solution will be..but probably it's not going to be a happy compromise...sheesh
Eric
[color=darkred][i]Be not afraid to grow slowly, only be afraid of standing still.[/i]
Chinese Proverb[/color]
Chinese Proverb[/color]
Ok thx. Got the wifi going via linksys (think wusb 54g) usb adapter for now with a native rt2570 driver that auto loads and using rutilt with wep 64 hex.. Net wiz didn't work for that setup. There's a dodpet for r8185 (which is onboard) but haven't sorted that out & dunno at this point how it works? Pup auto loads r8180 & it can see the network, but I can't connect to it.
Main problem I have right now is no sound (tried the normal stuff), but shouldn't be a huge prob cos I do have sound with tmxxine 3.01. Looking for any tips on how to sort it out though? I'll search out some info in the meantime.. It's quite exciting as it is the first time I have sound on the lap..with ANY linux & I've tried many.
The only other minor problem is when a driver is loaded with ndiss, but is no good & has to be unloaded, the box that comes up to indicate that is half in German. My Sprechen Zie Deutsch is not too swift.. lol.
Main problem I have right now is no sound (tried the normal stuff), but shouldn't be a huge prob cos I do have sound with tmxxine 3.01. Looking for any tips on how to sort it out though? I'll search out some info in the meantime.. It's quite exciting as it is the first time I have sound on the lap..with ANY linux & I've tried many.
The only other minor problem is when a driver is loaded with ndiss, but is no good & has to be unloaded, the box that comes up to indicate that is half in German. My Sprechen Zie Deutsch is not too swift.. lol.
I think some funny scripts are showing up on shutdown..but not sure at this point. At any rate, 'pute's shutting down fine & running good so far.there was a bug in the shutdown script
Last edited by jonyo on Tue 22 Jan 2008, 17:36, edited 1 time in total.
It displays a message what mounted partitions are unmounted, and what swap-partitions (Swapoff).I think some funny scripts are showing up on shutdown
I added this, because on some systems it can last a while until they are unmounted.
So you see that it still works, and does not hang.
Is it this?
You should see something similar to:
unmounting ...
Swapoff /dev/...
Mark
I updated the german Mini-Muppy on both servers.
The big ones still upload, I'll report back when it is done.
Fixed:
the german seamonkey was incompatible with other addons.
I updated Puppys seamonkey now.
Also added "skipstone", another browser that needs seamonkeys libraries.
And the mplayer-plugin.
English Muppy-Users can install skipstone with a simple dotpup, see: http://murga-linux.com/puppy/viewtopic.php?t=25643
Mark
The big ones still upload, I'll report back when it is done.
Fixed:
the german seamonkey was incompatible with other addons.
I updated Puppys seamonkey now.
Also added "skipstone", another browser that needs seamonkeys libraries.
And the mplayer-plugin.
English Muppy-Users can install skipstone with a simple dotpup, see: http://murga-linux.com/puppy/viewtopic.php?t=25643
Mark
All isos and addons and the buildsystem are updated now to the same state.
This will remain for some days or weeks.
This includes the Mplayer-Plugins, OpenOfiice 2.3.1 (formerly 2.3.0), Skipstone, fixed german seamonkey.
My colleague Stefan will have a look, too, but if he finds nothing important, this will be the next "stable" release we officially will offer at minisys.org.
The page there is updated less often as the forum-threads, where I announce also minor changes.
Mark
This will remain for some days or weeks.
This includes the Mplayer-Plugins, OpenOfiice 2.3.1 (formerly 2.3.0), Skipstone, fixed german seamonkey.
My colleague Stefan will have a look, too, but if he finds nothing important, this will be the next "stable" release we officially will offer at minisys.org.
The page there is updated less often as the forum-threads, where I announce also minor changes.
Mark
You don't need to update seamonkey, just the german was broken.
Of course you can, if you prefer to have 1.1.7.
I was told that 1.12 is faster, so I kept it.
I'm also not shure, if skipstone works with 1.17.
The mplayer-plugin has a menu-entry in "internet".
That opens a dialog.
Here you can select, if you want to use it in Firefox, Seamonkey, or both.
If you click on "off", it is deactivated.
Then the default-applications will be used again.
For example Mplayer (as external program, not embedded in the browser).
Then some movies are not streamed, but must be downloaded completely to watch them.
This is, what the plugin avoids, it can stream sites.
See screenshot and Page to test it here:
http://murga-linux.com/puppy/viewtopic.php?t=25591
It tells you to visit:
http://www.archive.org/details/the-last-man-on-earth
In the left box there, you see MPEG1 .
If you click on that without the plugin, that will be downloaded to disk.
If the plugin is active, the movie is displayed immedeatly in a rectangular area in your webbrowser (as stream).
Mark
Of course you can, if you prefer to have 1.1.7.
I was told that 1.12 is faster, so I kept it.
I'm also not shure, if skipstone works with 1.17.
The mplayer-plugin has a menu-entry in "internet".
That opens a dialog.
Here you can select, if you want to use it in Firefox, Seamonkey, or both.
If you click on "off", it is deactivated.
Then the default-applications will be used again.
For example Mplayer (as external program, not embedded in the browser).
Then some movies are not streamed, but must be downloaded completely to watch them.
This is, what the plugin avoids, it can stream sites.
See screenshot and Page to test it here:
http://murga-linux.com/puppy/viewtopic.php?t=25591
It tells you to visit:
http://www.archive.org/details/the-last-man-on-earth
In the left box there, you see MPEG1 .
If you click on that without the plugin, that will be downloaded to disk.
If the plugin is active, the movie is displayed immedeatly in a rectangular area in your webbrowser (as stream).
Mark
Ok, Just stumbled on Expose2 window overview..neat! Option comes up when the cursor is at the top of the screen.
Not sure yet at this point if this problem extends to other stuff but when I try to move the clock on the desktop (click on it, hold & drag to another spot), often doesn't work the first time.
Not sure yet at this point if this problem extends to other stuff but when I try to move the clock on the desktop (click on it, hold & drag to another spot), often doesn't work the first time.
yes, it must be clicked first to get the focus.jonyo wrote:Not sure yet at this point if this problem extends to other stuff but when I try to move the clock on the desktop (click on it, hold & drag to another spot), often doesn't work the first time.
I found no solution to avoid this, even after hours of testing and reading the Gtk-documentation.
In jwm you cannot move it at all like this.
Instead, you must right-click on the clock-entry in the taskbar -> move.
Mark
Last edited by MU on Sat 26 Jan 2008, 18:53, edited 1 time in total.
Broken Cups?
ok, I'm now in the house of my colleague, so I can test printing.
I get an error about that application/postscript cannot be used.
It seems on my update to Cups 1.3.5 I missed files.
Stefan says, I maybe must enable the PDF-printing again.
If I just knew how that is added
I will try to repair that in the next days, and also add more drivers again.
If someone already had success in setting up the printing, I'd be glad if you could tell me, what you changed.
Mark
ok, I'm now in the house of my colleague, so I can test printing.
I get an error about that application/postscript cannot be used.
It seems on my update to Cups 1.3.5 I missed files.
Stefan says, I maybe must enable the PDF-printing again.
If I just knew how that is added
I will try to repair that in the next days, and also add more drivers again.
If someone already had success in setting up the printing, I'd be glad if you could tell me, what you changed.
Mark
- Béèm
- Posts: 11763
- Joined: Wed 22 Nov 2006, 00:47
- Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win
Just installed the 008.1 as fugal.
I kept the pup_save from the 008 by renaming it to msy_save.
After a short time when loading f.e. Seamonkey the system almost comes to a stop.
RAM % was at about 33%
CPU 1396 Mhz, which is ok.
CPU usage at about 5%
So I don't know why it was like this. I have 256MB RAM.
When I used a swap file things were much better, alltho not as quick as 008.
Downloaded the addon and booted with it.
Forgot the swap and opening OO writer took > 10 minutes.
Again no real indication why.
After activating the swap performance was much better, but still not at the level of 008.
Swap is at 35% now.
So clearly 008.1 isn't for small (256MB RAM) machines.
I look at top, 251440K is used, 3964K free, 17788K buff, 127988K cached.
Any idea why so slow?
I kept the pup_save from the 008 by renaming it to msy_save.
After a short time when loading f.e. Seamonkey the system almost comes to a stop.
RAM % was at about 33%
CPU 1396 Mhz, which is ok.
CPU usage at about 5%
So I don't know why it was like this. I have 256MB RAM.
When I used a swap file things were much better, alltho not as quick as 008.
Downloaded the addon and booted with it.
Forgot the swap and opening OO writer took > 10 minutes.
Again no real indication why.
After activating the swap performance was much better, but still not at the level of 008.
Swap is at 35% now.
So clearly 008.1 isn't for small (256MB RAM) machines.
I look at top, 251440K is used, 3964K free, 17788K buff, 127988K cached.
Any idea why so slow?
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
Printing with Cups in Muppy 008.1 Mini
For MU:
After installing cups-install-v0.3.pup, I was able to set up my HP Officejet All-in-One Printer successfully.
I am very new to Linux, Puppy Linux and the various Puppy Derivatives that have been developed. Thank you for Muppy 008.1 Mini, it is an extraordinary achievement. Your efforts are appreciated.
Very Respectfully,
Devildog
After installing cups-install-v0.3.pup, I was able to set up my HP Officejet All-in-One Printer successfully.
I am very new to Linux, Puppy Linux and the various Puppy Derivatives that have been developed. Thank you for Muppy 008.1 Mini, it is an extraordinary achievement. Your efforts are appreciated.
Very Respectfully,
Devildog
Hello MU,
nice job done and I enjoy it, but there is a little point, I like to mentioned.
To be able to use a "german" version of Puppy is realy nice, but do you miss to compile it with the "german" letters???
I do have standard a german keyboard, of course, but I am stongly missing "ÄäÖöÜüß" with it.
Would be nice to see it in your nice compilation to be able to use a full german keyboard within the programs.
Another interesting ADD to your compilation would be the programs from "SoftMaker", maybee you can think about this and ADD it in future releases. There are some Trial versions available at: www.softmaker.de
Regards
nice job done and I enjoy it, but there is a little point, I like to mentioned.
To be able to use a "german" version of Puppy is realy nice, but do you miss to compile it with the "german" letters???
I do have standard a german keyboard, of course, but I am stongly missing "ÄäÖöÜüß" with it.
Would be nice to see it in your nice compilation to be able to use a full german keyboard within the programs.
Another interesting ADD to your compilation would be the programs from "SoftMaker", maybee you can think about this and ADD it in future releases. There are some Trial versions available at: www.softmaker.de
Regards