Compiz Fusion 0.7.7 (git 28 Jul 2008)
click at the bottom of the screen the taskbar should reappear
Taking Puppy Linux to the limit of perfection. meanwhile try "puppy pfix=duct_tape" kernel parem eater.
X86: Sager NP6110 3630QM 16GB ram, Tyan Thunder 2 2x 300Mhz
Sun: SS2 , LX , SS5 , SS10 , SS20 ,Ultra 1, Ultra 10 , T2000
Mac: Platinum Plus, SE/30
X86: Sager NP6110 3630QM 16GB ram, Tyan Thunder 2 2x 300Mhz
Sun: SS2 , LX , SS5 , SS10 , SS20 ,Ultra 1, Ultra 10 , T2000
Mac: Platinum Plus, SE/30
I'd got this error:
Please give me some instructions. TK
Code: Select all
sh-3.00# compiz-manager
Checking for Xgl: not present.
No whitelisted driver found
aborting and using fallback: /usr/bin/metacity
no /usr/bin/metacity found, exiting
you haven't actually told US anything!
in order to help you we need to know if you have followed ALL the instructions in the first post?
and if you fail after that... what graphics card do you have?
please compress and upload this file /ect/X11/xorg.conf
I recommend that you read this thread: http://www.murga-linux.com/puppy/viewtopic.php?t=23569
hope you get wobbling!!
in order to help you we need to know if you have followed ALL the instructions in the first post?
and if you fail after that... what graphics card do you have?
please compress and upload this file /ect/X11/xorg.conf
Code: Select all
sh-3.00# compiz-manager
Checking for Xgl: not present.
No whitelisted driver found <<from this i think you have a black listed ati card... don't worry it is probably easy to fix
aborting and using fallback: /usr/bin/metacity
no /usr/bin/metacity found, exiting
hope you get wobbling!!
Taking Puppy Linux to the limit of perfection. meanwhile try "puppy pfix=duct_tape" kernel parem eater.
X86: Sager NP6110 3630QM 16GB ram, Tyan Thunder 2 2x 300Mhz
Sun: SS2 , LX , SS5 , SS10 , SS20 ,Ultra 1, Ultra 10 , T2000
Mac: Platinum Plus, SE/30
X86: Sager NP6110 3630QM 16GB ram, Tyan Thunder 2 2x 300Mhz
Sun: SS2 , LX , SS5 , SS10 , SS20 ,Ultra 1, Ultra 10 , T2000
Mac: Platinum Plus, SE/30
@cb88 and guis
Specifications of my comp:
CPU AMD Socket AM2, Athlon Dual Core.
1 MB RAM
Graphic card on board: ATI Randeon Xpress 1200 Series
I re-install (new) the wnop in frugal mode and executed these step:
1. Frugal install on hda1
2. Boot -> 3. personal file = 0 -> 4. Select keyboard = us -> 5. Choice Xorg - 1024x768x24 -> 6. Choice Compiz-Fusion -> 7. Reboot -> Save pup_save.2fs on hda1 -> 8. Reboot and try this command:
This is my /etc/X11/xorg.conf (zip in xorg_conf.tar.gz)
May I'd missed something? Did I made any errors or some graphics packs?
Please give me some hints? TK
PS: In main menu I'd seen these items: ConfigSetting Manager, Emerald themes manager. But I don't see the item for "glxgears".
Specifications of my comp:
CPU AMD Socket AM2, Athlon Dual Core.
1 MB RAM
Graphic card on board: ATI Randeon Xpress 1200 Series
I re-install (new) the wnop in frugal mode and executed these step:
1. Frugal install on hda1
2. Boot -> 3. personal file = 0 -> 4. Select keyboard = us -> 5. Choice Xorg - 1024x768x24 -> 6. Choice Compiz-Fusion -> 7. Reboot -> Save pup_save.2fs on hda1 -> 8. Reboot and try this command:
Code: Select all
sh-3.00# compiz-manager
Checking for Xgl: not present.
No whitelisted driver found
aborting and using fallback: /usr/bin/metacity
no /usr/bin/metacity found, exiting
sh-3.00#
May I'd missed something? Did I made any errors or some graphics packs?
Please give me some hints? TK
PS: In main menu I'd seen these items: ConfigSetting Manager, Emerald themes manager. But I don't see the item for "glxgears".
- Attachments
-
- xorg_conf.tar.gz
- xorg.conf
- (1.91 KiB) Downloaded 439 times
@vanchutr: You will need the latest proprietary driver: http://ati.amd.com/support/drivers/linu ... adeon.html
But the problem is that it can be hard to install in Puppy-3.xx. Hopefully someone else had compiled the driver for Puppy-3 and search in the Compiz Fusion Forum about configuring your ATI igp.
------------------------------------------------------------
The new URL for my CompizFusion packages is at (Filefront):
PuppyLinux > Puppy3 > WindowManager > CompizFusion
There is a new directory also, which has packages compiled just yesterday (source code updated to 31 December 2007). I haven't made a "test pack", so these are separate packages and without dependencies, if you want to upgrade CompizFusion you must install:
But the problem is that it can be hard to install in Puppy-3.xx. Hopefully someone else had compiled the driver for Puppy-3 and search in the Compiz Fusion Forum about configuring your ATI igp.
------------------------------------------------------------
The new URL for my CompizFusion packages is at (Filefront):
PuppyLinux > Puppy3 > WindowManager > CompizFusion
There is a new directory also, which has packages compiled just yesterday (source code updated to 31 December 2007). I haven't made a "test pack", so these are separate packages and without dependencies, if you want to upgrade CompizFusion you must install:
- - compiz.pet (core)
- libcompizconfig.pet
- compizconfig-python.pet
- ccsm.pet
- plugins-main.pet
everything else is optional(e.g. plugins-extra, simple-ccsm, freewins)
[url=http://www.puppylinux.com][img]http://i.imgur.com/M4OyHe1.gif[/img][/url]
Just been trying out your latest dotpets and they seem to do that funny bug where the pet isn't installed but just plonked in root. Nevertheless the resulting dotpet can then be executed and does install properly.
I've just done the minimal upgrade so far and tried simple-ccsm and shelf, all seems fine. Although, compiz still returns version 0.5.5 but I assume that's because of git and it not being an official release?
I've just done the minimal upgrade so far and tried simple-ccsm and shelf, all seems fine. Although, compiz still returns version 0.5.5 but I assume that's because of git and it not being an official release?
That's strange, I've tested some of those dotpets in a new pup_save file and they installed without problems.tombh wrote:Just been trying out your latest dotpets and they seem to do that funny bug where the pet isn't installed but just plonked in root.
The answer:tombh wrote:compiz still returns version 0.5.5 but I assume that's because of git and it not being an official release?
Deciare wrote:The definitive word on this can be found in this post by a core developer.
The git master version of Compiz currently identifies itself as version 0.5.5, which is indeed the latest version. Other components to be found in git may be identified as version 0.6.99. The whole collection will likely be released as 0.7 when the next stable release rolls around.
As for confusion between the communities, what kind? A few people have been wandering onto the old site, but most of us should be gathered here.
[url=http://www.puppylinux.com][img]http://i.imgur.com/M4OyHe1.gif[/img][/url]
@tombh I have that problem with ALL dotpets after it starts doing it i just gets hung up copying to / and i have PLENTY space
looking into vector linux they have my nvidia driver auto compiled at installation and it is multiuser and fast (they have a rep for speed as a binary distro) but I will still mess with puppy for fun vector is lacking a f77 compiler sofar no compileing R just yet
looking into vector linux they have my nvidia driver auto compiled at installation and it is multiuser and fast (they have a rep for speed as a binary distro) but I will still mess with puppy for fun vector is lacking a f77 compiler sofar no compileing R just yet
Taking Puppy Linux to the limit of perfection. meanwhile try "puppy pfix=duct_tape" kernel parem eater.
X86: Sager NP6110 3630QM 16GB ram, Tyan Thunder 2 2x 300Mhz
Sun: SS2 , LX , SS5 , SS10 , SS20 ,Ultra 1, Ultra 10 , T2000
Mac: Platinum Plus, SE/30
X86: Sager NP6110 3630QM 16GB ram, Tyan Thunder 2 2x 300Mhz
Sun: SS2 , LX , SS5 , SS10 , SS20 ,Ultra 1, Ultra 10 , T2000
Mac: Platinum Plus, SE/30
How do you mean? Have you made the fusion-06Oct07-test02wow.pet and the recent filefront files into ONE SINGLE pet? As a lot of the files would jsut cancel each other out! I assume you mean you've just made a pet of all wow's recent Dec31 files? If that's the case I can provide a compiled version of CCSM that doesn't require python -- it could be included in the pet, thus creating a compiz-fusion package that has 'no' dependencies.
Well here is CCSM -- it is tar.gz, after unpacking it is about 4.5MB.
After unpacking it must replace the file /usr/bin/ccsm in your new dotpet.
The Wobble Fairy Button is unique to wNOP. It is a small script that detects for Compiz-Fusion and Emerald as running processes, executing either if they are not detected as running. The 'magic' is that it will not just crudely execute both programs 'blindly' without checking to see if they are running already. You see, sometimes Emerald will crash on its own, whilst Compiz-Fusion is still happily going strong.
After unpacking it must replace the file /usr/bin/ccsm in your new dotpet.
The Wobble Fairy Button is unique to wNOP. It is a small script that detects for Compiz-Fusion and Emerald as running processes, executing either if they are not detected as running. The 'magic' is that it will not just crudely execute both programs 'blindly' without checking to see if they are running already. You see, sometimes Emerald will crash on its own, whilst Compiz-Fusion is still happily going strong.
Sad to say your gpu is not supported:
http://wiki.compiz-fusion.org/Troubleshooting wrote:ATI Cards
If you are using an ATI card, Compiz Fusion requires at least a Radeon 7000 (or M6). From the 7000 to the X1050, you can use AIGLX with the open source ati driver. All X1xxx series cards and the Xpress 200(M) must use the proprietary fglrx driver with Xgl.
[url=http://www.puppylinux.com][img]http://i.imgur.com/M4OyHe1.gif[/img][/url]