Dingo alpha6 feedback/bugs
boot problem
I tried alpha6 on my 5 yr old home computer - booted up fine.
Then tried on my new computer at work - no go.
The live cd gets stuck after searching for puppy files with error message 'cant find puppy_396.sfs'.
This system has a sata hard drive and an IDE DVD-ROM and and IDE DVD RW drive. Puppy 301 works OK on this machine.
Then tried on my new computer at work - no go.
The live cd gets stuck after searching for puppy files with error message 'cant find puppy_396.sfs'.
This system has a sata hard drive and an IDE DVD-ROM and and IDE DVD RW drive. Puppy 301 works OK on this machine.
Hi all,
I just did an upgrade on an Acer Travelmate 4002WLMi
(wide screen) from V2.17 to V396
This upgrade was onto an external USB hard drive and all went
well with it.
The machine uses a German keyboard and here again all went
well.
I like the multimedia player XINE it sure goes well on this machine. I
tested it out using a DVD.
As this machine is on a wireless link this also set up easily,
sad to say I can't get the little antenna down on the tray bottom
right hand side ?
I like the visual antenna better than seeing the two monitors
as this is more positive of a WIFI operation than a LAN connection.
How do I add the antenna in ?
Cheers Tui
I just did an upgrade on an Acer Travelmate 4002WLMi
(wide screen) from V2.17 to V396
This upgrade was onto an external USB hard drive and all went
well with it.
The machine uses a German keyboard and here again all went
well.
I like the multimedia player XINE it sure goes well on this machine. I
tested it out using a DVD.
As this machine is on a wireless link this also set up easily,
sad to say I can't get the little antenna down on the tray bottom
right hand side ?
I like the visual antenna better than seeing the two monitors
as this is more positive of a WIFI operation than a LAN connection.
How do I add the antenna in ?
Cheers Tui
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
I am beginning to suspect - using intuition
as I don't have sufficient neurons for logic
that my problems with xine are memory related.
I enclose info on my running processes under Dingo
just in case they are of use or interest
PS.
Sage made my earlier screen shot smaller
I hope you are having more luck.
I am now going to try Puppy Dingo on a Pentium III
as I don't have sufficient neurons for logic
that my problems with xine are memory related.
I enclose info on my running processes under Dingo
just in case they are of use or interest
Code: Select all
Mem: 338388K used, 177012K free, 0K shrd, 29352K buff, 222848K cached
CPU: 0% usr 0% sys 0% nice 98% idle 0% io 0% irq 0% softirq
Load average: 0.06 0.16 0.09
PID PPID USER STAT VSZ %MEM %CPU COMMAND
11295 11290 root S 148m 29% 1% /usr/lib/seamonkey-1.1.6/seamonkey-bin
3942 3941 root S < 99676 19% 0% X :0 -br -nolisten tcp
1825 1 root S 2772 1% 0% rxvt -font 7x14 -bg #c0c0c0 -fg black -T Top -n Top -e top
4015 4014 root S 17104 3% 0% gtkdialog3 --program Vision
3978 1 root S 14404 3% 0% /usr/local/apps/ROX-Filer/ROX-Filer -p /root/Choices/ROX-Filer/PuppyPin
3992 1 root S 8812 2% 0% blinky -bg #4D525B
3983 3954 root S 8592 2% 0% absvolume -bg #4D525B
3954 3941 root S 5348 1% 0% jwm
3145 1 root S 4636 1% 0% /usr/sbin/cupsd
3986 1 root S 3412 1% 0% xload -nolabel -fg red -hl white -bg #4D525B
3988 1 root S 3384 1% 0% freememapplet -p 13
3958 3957 root S 3068 1% 0% /usr/bin/autocutsel
3842 1 root S 2772 1% 0% -sh
4014 4013 root S 2704 1% 0% /bin/bash /root/Startup/YAP
11290 11270 root S 2688 1% 0% /bin/sh /usr/lib/seamonkey-1.1.6/run-mozilla.sh /usr/lib/seamonkey-1.1.6/seamonkey-bin
3898 3842 root S 2664 1% 0% /bin/sh /usr/X11R7/bin/xwin
11270 3978 root S 2656 1% 0% /bin/sh /usr/bin/mozilla
4013 1 root S 2640 1% 0% /bin/sh /usr/sbin/delayedrun
3957 3954 root S 2632 1% 0% /bin/sh /root/.xinitrc
1826 1825 root R 2312 0% 0% top
3497 1 root S N 2244 0% 0% /bin/sh /usr/sbin/savepuppyd
3941 3898 root S 2224 0% 0% /usr/X11R7/bin/xinit /root/.xinitrc -- -br -nolisten tcp
3734 1 root S 2048 0% 0% /sbin/getty 38400 tty2
1 0 root S 2044 0% 0% init
2652 1 root S 2044 0% 0% klogd
2650 1 root S 2044 0% 0% syslogd -m 0
3602 1 root S 1540 0% 0% dhcpcd -I eth0
2528 3497 root S N 1336 0% 0% sleep 4
Sage made my earlier screen shot smaller
I hope you are having more luck.
I am now going to try Puppy Dingo on a Pentium III
Arise, Sir Barry! Multitudinous felicitations.
So now we all know - it's the kernel (colonel?!)
Way out of my depth, but I did note massive inconsistencies in 2.6.24/3 nomenclatures. Sometimes I was reading sda, other times hda - often within the same file. Probably some more homework for for those who know what they're doing.
Thanks a $Am.
So now we all know - it's the kernel (colonel?!)
Way out of my depth, but I did note massive inconsistencies in 2.6.24/3 nomenclatures. Sometimes I was reading sda, other times hda - often within the same file. Probably some more homework for for those who know what they're doing.
Thanks a $Am.
Out of town, no bcm43xx report
I don't have access to my two laptops with bcm43xx on them, so I can't try them with the new (older) kernel. I just have my Nokia N800 handheld computer. I am running the newest Dingo (older kernel ) alpha 6 on a modern Gateway desktop computer, and it looks great. No problems thus far.
-
- Posts: 195
- Joined: Sat 21 Jan 2006, 05:35
- Location: Bedfordshire, UK
Frugal install of 2.6.24 alpha6 (files extracted using Isobuster) on NEC laptop with NTFS hard drive, new menulst entry:
with PUP_396 and ZDRV in C:\
Booted, selected 0 for no save file, got red text something like pup_396 not found.
Rebooted different OS, renamed PUP_396 and ZDRV to lower case, and rebooted, selected 0 for no save file, did keyboard and video selection OK, got to desktop, closed and made save file OK.
(Not sure what determines the upper/lower case when creating the files, maybe Isobuster, or maybe it's a setting in the iso.)
Rebooted, selected save file OK, clicked Connect icon, got choice of ath0 and eth0, put in details, autoDHCP, connected to wireless OK, browsing OK.
Up/down keys by trackpad work, never worked on 3.01 and earlier. Makes navigating some web pages much easier.
Tried BBC radio (I'm a Brit), radio sounded OK but then cut off after 1 min 20 sec or so, tried again and cut off after approx same time. Tried open in standalone player, got very broken sound, and same cut off time.
Youtube video worked fine with clip over 3 mins long.
Abiword, Gnumeric, firewall, CD playing, Fotox OK. (Didn't actually check firewall robustness.) Gnumeric sheet tabs had white text on near-white background until selected (so you didn't know the sheet name until selected so hit and miss), but changing the theme solved this.
Ripoff MP3 rippper seemed very slow, but I'd never used it before, maybe operator error.
Pdf viwer started OK and opened files, but just shut down with no warning if down arrow or page down was used. Repeated with same effect several time. Same/similar pdf viewer in Puppy3.01 (didn't actually check which versions) works fine.
Battery monitor seems to be black on dark grey, no actual %, reported in another thread.
In general, seems quite quick, maybe slightly quicker than other Puppies, a bit too orange for my taste (not worked out how to change that as theme doesn't seem to affect it), generally usable, but would be nice to get the main issues sorted.
I'll play some more....
Code: Select all
title Puppy Linux 400a6
kernel (hd0,1)/boot/puppy400a6/VMLINUZ pmedia=idehd root=/dev/ram0
initrd (hd0,1)/boot/puppy400a6/INITRD.GZ
Booted, selected 0 for no save file, got red text something like pup_396 not found.
Rebooted different OS, renamed PUP_396 and ZDRV to lower case, and rebooted, selected 0 for no save file, did keyboard and video selection OK, got to desktop, closed and made save file OK.
(Not sure what determines the upper/lower case when creating the files, maybe Isobuster, or maybe it's a setting in the iso.)
Rebooted, selected save file OK, clicked Connect icon, got choice of ath0 and eth0, put in details, autoDHCP, connected to wireless OK, browsing OK.
Up/down keys by trackpad work, never worked on 3.01 and earlier. Makes navigating some web pages much easier.
Tried BBC radio (I'm a Brit), radio sounded OK but then cut off after 1 min 20 sec or so, tried again and cut off after approx same time. Tried open in standalone player, got very broken sound, and same cut off time.
Youtube video worked fine with clip over 3 mins long.
Abiword, Gnumeric, firewall, CD playing, Fotox OK. (Didn't actually check firewall robustness.) Gnumeric sheet tabs had white text on near-white background until selected (so you didn't know the sheet name until selected so hit and miss), but changing the theme solved this.
Ripoff MP3 rippper seemed very slow, but I'd never used it before, maybe operator error.
Pdf viwer started OK and opened files, but just shut down with no warning if down arrow or page down was used. Repeated with same effect several time. Same/similar pdf viewer in Puppy3.01 (didn't actually check which versions) works fine.
Battery monitor seems to be black on dark grey, no actual %, reported in another thread.
In general, seems quite quick, maybe slightly quicker than other Puppies, a bit too orange for my taste (not worked out how to change that as theme doesn't seem to affect it), generally usable, but would be nice to get the main issues sorted.
I'll play some more....
Flash,
All of the options to make pcdripper work are in the [ Click for options ] button at the top of the gui.
All of the options to make pcdripper work are in the [ Click for options ] button at the top of the gui.
- Attachments
-
- pcdripper.jpg
- (55.54 KiB) Downloaded 1605 times
Continuation :
At startup : "Making the file system usable ... /bin/mount/ : line 91 /etc/mtab : Read-only file system".
pppoe is missing :
ftp://ibiblio.org/pub/linux/distributio ... tched1.pet
(for using it, do pppoe-setup and pppoe-start).
Is it possible to have windows key work ?
And Num lock ON at start.
At startup : "Making the file system usable ... /bin/mount/ : line 91 /etc/mtab : Read-only file system".
pppoe is missing :
ftp://ibiblio.org/pub/linux/distributio ... tched1.pet
(for using it, do pppoe-setup and pppoe-start).
Is it possible to have windows key work ?
And Num lock ON at start.
Last edited by linuxcbon on Mon 18 Feb 2008, 19:24, edited 1 time in total.
On the "stay at home" (ZPC-9000) system, my script using the iwpriv commands works and allows me to connect to my wpa2 network. However, my scrpt using wpa_supplicant fails due to lack of RALINK driver support. Trying the network wizard, if also fails. From the appearance of the "blinky" network lights, I suspect it also has wpa_supplicant problem. The wpa_supplicant version is 0.6.0.
On the Eee PC, I have no luck with the ath_pci driver. There is no creation of ath0 interface. The interesting thing is I can turn on or off the card with
Function F2 key, but, still no interface. I have used Raffy's breezy and can connect.
I still get the "unsafe /tmp permissions" error with syslinux on USB installations.
I think going back to the older kernel is not solution. The problem is the kernel modules for the wireless hardware. Having a wpa_supplicant that supports the RALINK and wifi drivers would help. I think the ath0 problem may be a module dependency issue. I will check my notes, I seem to have encounter this with ath_pci driver before.
On the Eee PC, I have no luck with the ath_pci driver. There is no creation of ath0 interface. The interesting thing is I can turn on or off the card with
Function F2 key, but, still no interface. I have used Raffy's breezy and can connect.
I still get the "unsafe /tmp permissions" error with syslinux on USB installations.
I think going back to the older kernel is not solution. The problem is the kernel modules for the wireless hardware. Having a wpa_supplicant that supports the RALINK and wifi drivers would help. I think the ath0 problem may be a module dependency issue. I will check my notes, I seem to have encounter this with ath_pci driver before.
Enjoy life, Just Greg
Live Well, Laugh Often, Love Much
Live Well, Laugh Often, Love Much
I didn't mention this before, but Dingo is looking very good. Seems quite fast.
I've tried it on 2 laptops and 4 desktops (3 with ide, 1 with ide & sata) without problems, except for the bcm43xx on my wife's laptop. That's nothing new though. It's been hit or miss with the bcm43xx for a while. That wireless card has two different kernel modules it could use and two different sets of firmware depending on how old the card is.
The rt2x00 drivers for Ralink have been buggy for quite a while, perhaps now that they're main-lined they'll improve. The legacy Ralink drivers are quite stable.
Probably by the time Dingo gets to beta 2.6.24.1 will be out with a truck load of fixes. Keep pressing foward!
Thanks for your work.
I've tried it on 2 laptops and 4 desktops (3 with ide, 1 with ide & sata) without problems, except for the bcm43xx on my wife's laptop. That's nothing new though. It's been hit or miss with the bcm43xx for a while. That wireless card has two different kernel modules it could use and two different sets of firmware depending on how old the card is.
The rt2x00 drivers for Ralink have been buggy for quite a while, perhaps now that they're main-lined they'll improve. The legacy Ralink drivers are quite stable.
Probably by the time Dingo gets to beta 2.6.24.1 will be out with a truck load of fixes. Keep pressing foward!
Thanks for your work.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Barry, I recommend reverting to the older 0.5.8 version of wpa_supplicant, patched for Ralink support. I compiled and packaged this version during Puppy4's early stages -JustGreg wrote:my scrpt using wpa_supplicant fails due to lack of RALINK driver support.
http://www.murga-linux.com/puppy/viewto ... 956#151956
wpa-supplicant-0.6.0 was supposed to support Ralink out of the box, but it clearly doesn't work.
That's to be expected. The standard ath_pci driver does not support the particular Atheros chipset in the Eee.JustGreg wrote:On the Eee PC, I have no luck with the ath_pci driver.
Once Puppy4 is finalised we will need to compile the special patched version of the ath_pci driver for you ... but this driver will need to be installed as an add-on, because it breaks compatibility with other Atheros wifi devices.
Hi all,
I have just gone to the site called at BarryK blog
and noticed that the kernel k2.6.21.7 has now been uploaded,
it was not there a few hours ago. I don't know who did the upload?
I have now gone thro' the motion of d/l, checksum and burned cd.
Can't see any change except sda xx is now hda xx and it still
has missing the items I reported on other threads.
So now I have the three versions of kernels with the same puppy
theme. All is well at the moment.
Cheers Tui
I have just gone to the site called at BarryK blog
and noticed that the kernel k2.6.21.7 has now been uploaded,
it was not there a few hours ago. I don't know who did the upload?
I have now gone thro' the motion of d/l, checksum and burned cd.
Can't see any change except sda xx is now hda xx and it still
has missing the items I reported on other threads.
So now I have the three versions of kernels with the same puppy
theme. All is well at the moment.
Cheers Tui
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
I have fixed the tray height.kirk wrote: Thanks for putting in the battery monitor. In order to see the whole battery monitor, /root/.jwmrc-tray line 2 height="26" should be changed to height="28".
Also, The File-Sharing (Pcurlftp) Rox app depends on pure-ftpd. I think you said you were going to include it. Anyway pure-ftpd is a pet package available on Pet-get, but the package has a problem. The folder /root/ftpd needs to have its owner changed to ftp and permissions set to 777 or 755.
Some folks said they had problems with bcm43 wireless. My wife's laptop has a bcm43. It didn't get the module loaded. I ended up having to rmmod the b43 and ssb modules and then modprobe the bcm43xx. If I can get some more time with her laptop I'll try to figure out what's going on.
I changed /root/ftpd owner to 'ftp'.
I have now included pure_ftpd.
Note, the PET package is named 'file_sharing-curlftpfs-mpscan-0.1-0.9.1-0.1.0'.
The fixes did not make it into the alpha6 build with 2.6.21.7 kernel nor the 3.02alpha1.
Yes, weird about the bcm43xx.
[url]https://bkhome.org/news/[/url]
- Béèm
- Posts: 11763
- Joined: Wed 22 Nov 2006, 00:47
- Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win
This annoys me a lot.
A password field lenght issue.
See: http://www.murga-linux.com/puppy/viewto ... 856#170856
I would appreciate a solution.
A password field lenght issue.
See: http://www.murga-linux.com/puppy/viewto ... 856#170856
I would appreciate a solution.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
I've used gFTP for years, never run into a problem with password size.Béèm wrote:This annoys me a lot.
A password field lenght issue.
See: http://www.murga-linux.com/puppy/viewto ... 856#170856
I would appreciate a solution.
I think, from memory, the biggest password I have used is 10 characters.
The problem is more likely to be the ftp server at the other end.
[url]https://bkhome.org/news/[/url]
- Béèm
- Posts: 11763
- Joined: Wed 22 Nov 2006, 00:47
- Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win
The problem is I can't enter a password bigger then 7 characters in the gui field of gFTP. No problem to enter a userid bigger then 7 characters.BarryK wrote:I've used gFTP for years, never run into a problem with password size.Béèm wrote:This annoys me a lot.
A password field lenght issue.
See: http://www.murga-linux.com/puppy/viewto ... 856#170856
I would appreciate a solution.
I think, from memory, the biggest password I have used is 10 characters.
The problem is more likely to be the ftp server at the other end.
It's not a question of a problem at the server end as I can go to it with FileZilla in Windows without a problem.
EDIT
I tried in 3.01 with gFTP at 2.0.18, same problem.
As I had FileZilla in 3.01 installed also I tried and I have no problem to connect to my website.
So definitely a problem in gFTP.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]