ZSNES Super Nintendo emulator Puppy 4.0 SDL
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
ZSNES Super Nintendo emulator Puppy 4.0 SDL
Another forum member wanted this emulator so I compiled it and made up an icon for it,
First if you don't have SDLl installed, install the package below
Second install the ZSNES pet package
Enjoy::
ttuuxxx
First if you don't have SDLl installed, install the package below
Second install the ZSNES pet package
Enjoy::
ttuuxxx
- Attachments
-
- zsnes.png
- (9.42 KiB) Downloaded 13915 times
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
Steem is a Atari ST emulator. There is a Linux version available at the site. I have not tried it on puppy but it works great on kubuntu.
http://steem.atari.st/download.htm
http://steem.atari.st/download.htm
-
- Posts: 3
- Joined: Mon 10 Nov 2008, 21:07
Gameboy emulator
Hi,
first of all thanks for this perfect working PET !
Now I am searching for a Gameboy emulator, but nowhere I can find a compiled version
I found the one i attached to this post, but it is source.
I never before compiled software under Linux but I will give it a try.
If I'm successful, i will post it here, but i wont count on it
Perhaps there is someone out there who is capable of this hard task for me, but likely piece of cake for him/her ?
first of all thanks for this perfect working PET !
Now I am searching for a Gameboy emulator, but nowhere I can find a compiled version
I found the one i attached to this post, but it is source.
I never before compiled software under Linux but I will give it a try.
If I'm successful, i will post it here, but i wont count on it
Perhaps there is someone out there who is capable of this hard task for me, but likely piece of cake for him/her ?
-
- Posts: 3
- Joined: Mon 10 Nov 2008, 21:07
so...
I think no chance for a newbie to linux like me.
no problem with setting up the compiling enviroment:
http://puppylinux.com/development/compileapps.htm
in bash gcc returns no fault.
if i unpack the tar.gz file there is a readme and in the readme I am told to look into the install file for further instructions.
Ok, but there is no install file..
so im stuck
after reading about an hour here and there i tried:
-> no such file or directory
Am I wrong or shouldnt there be a file called ./configure or something like that (DANGER NEWBIE ALERT)
but there isn't
takes to much time for me for installing such a mini program...
Tomorrow i will take a look for a deb file for it, perhaps there is a chance to get that installed
no problem with setting up the compiling enviroment:
http://puppylinux.com/development/compileapps.htm
in bash gcc returns no fault.
if i unpack the tar.gz file there is a readme and in the readme I am told to look into the install file for further instructions.
Ok, but there is no install file..
so im stuck
after reading about an hour here and there i tried:
Code: Select all
./configure
./configure --prefix=/usr
Am I wrong or shouldnt there be a file called ./configure or something like that (DANGER NEWBIE ALERT)
but there isn't
takes to much time for me for installing such a mini program...
Tomorrow i will take a look for a deb file for it, perhaps there is a chance to get that installed
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Re: so...
you need to read about "devx" devx is the compiler you need to install first before you compile. It also has to match your version of puppy.katzenkuchen wrote:I think no chance for a newbie to linux like me.
no problem with setting up the compiling enviroment:
http://puppylinux.com/development/compileapps.htm
in bash gcc returns no fault.
if i unpack the tar.gz file there is a readme and in the readme I am told to look into the install file for further instructions.
Ok, but there is no install file..
so im stuck
after reading about an hour here and there i tried:
-> no such file or directoryCode: Select all
./configure ./configure --prefix=/usr
Am I wrong or shouldnt there be a file called ./configure or something like that (DANGER NEWBIE ALERT)
but there isn't
takes to much time for me for installing such a mini program...
Tomorrow i will take a look for a deb file for it, perhaps there is a chance to get that installed
once thats installed then you can use
#./configure --prefix=/usr --build=i386-linux
#make
#new2dir make install
Search the forum and read up on compiling, then download the sfs
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
-
- Posts: 3
- Joined: Mon 10 Nov 2008, 21:07
as i wrote the compiling enviroment is working. I red many posts, but if you don't really know what you are doing...you need to read about "devx" devx is the compiler you need to install first before you compile. It also has to match your version of puppy.
once thats installed then you can use
#./configure --prefix=/usr --build=i386-linux
#make
#new2dir make install
Search the forum and read up on compiling, then download the sfs
ttuuxxx
I can't find a real good complete example/manual for compiling under puppy...sorry!
But here comes the clue. You don't need to compile the package. I'm not sure if i should or
I red the Readme and as i understood it, i had to compile it. Call me an idiot if you have to, I don't know better...
The solution is, in a console start it like this:
Code: Select all
./VisualBoyAdvance nameofrom.gba
But I'm sure if some other newbie will find this post, it would be helpful.
Hi, thank you for zsnes!
I can't get it to work, as when I run it, it abruptly (fancy word user) closes.
Here's the console thingie, in case you may want to help.
Thanks
PD: Not really a big deal to not be able to play znes, don't worry! Thank you for compiling it!
I can't get it to work, as when I run it, it abruptly (fancy word user) closes.
Code: Select all
ZSNES v1.51, (c) 1997-2007, ZSNES Team
Be sure to check http://www.zsnes.com/ for the latest version.
ZSNES is written by the ZSNES Team (See AUTHORS.TXT)
ZSNES comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to redistribute it under certain conditions;
please read 'LICENSE.TXT' thoroughly before doing so.
Use ZSNES -? for command line definitions.
This is a work in progress build. It contains code which
May or may not be complete
If this is supposed to be an official release, you forgot to
run configure with --enable-release, go rebuild.
Starting Mouse detection.
ManyMouse: 0 mice detected.
Audio Opened.
Driver: Simple DirectMedia Layer output
Channels: 2
Rate: 32000
ZSNES could not find any joysticks.
Illegal instruction
Thanks
PD: Not really a big deal to not be able to play znes, don't worry! Thank you for compiling it!
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Are you using puppy 4.0 +droope wrote:Hi, thank you for zsnes!
I can't get it to work, as when I run it, it abruptly (fancy word user) closes.
Here's the console thingie, in case you may want to help.Code: Select all
ZSNES v1.51, (c) 1997-2007, ZSNES Team Be sure to check http://www.zsnes.com/ for the latest version. ZSNES is written by the ZSNES Team (See AUTHORS.TXT) ZSNES comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; please read 'LICENSE.TXT' thoroughly before doing so. Use ZSNES -? for command line definitions. This is a work in progress build. It contains code which May or may not be complete If this is supposed to be an official release, you forgot to run configure with --enable-release, go rebuild. Starting Mouse detection. ManyMouse: 0 mice detected. Audio Opened. Driver: Simple DirectMedia Layer output Channels: 2 Rate: 32000 ZSNES could not find any joysticks. Illegal instruction
Thanks
PD: Not really a big deal to not be able to play znes, don't worry! Thank you for compiling it!
did you install SDL from the link above
if so, Once you fixmenus
and restart jwm
or reboot the pc, you'll have a icon in games to click on to start it.
I just tried it and it works fine on series 4.0 +
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://sdlemu.ngemu.com/basdl.php
Gameboy advance LINUX also emulator, for someone who asked here. *too lazy to check.
Cheers!
Gameboy advance LINUX also emulator, for someone who asked here. *too lazy to check.
Cheers!
Thanks for the ZSNES. Had no problem getting it set up, however it's working a bit buggy. The graphics and sound are very jumpy, constantly slowing down and speeding up. Has anyone else had problems with this?
I have a laptop with a 1.8G single core processor and 1G of of RAM. On my old desktop I only had 128Mb of RAM and a 0.6G processor running Win98. And ZSNES ran much smoother on my old computer than on my new one. Also, I copied a ROM that I was half way done playing with from my old computer to a CD-RW and loaded it onto my new one running Puppy, but my save is missing. I think maybe because win98 used FAT32 and Puppy uses ext2(if I remember correctly) that it didn't load right. Could this also be why it runs poorly? I haven't tried running a ROM downloaded off the internet yet, just one that was on my old computer.
I have a laptop with a 1.8G single core processor and 1G of of RAM. On my old desktop I only had 128Mb of RAM and a 0.6G processor running Win98. And ZSNES ran much smoother on my old computer than on my new one. Also, I copied a ROM that I was half way done playing with from my old computer to a CD-RW and loaded it onto my new one running Puppy, but my save is missing. I think maybe because win98 used FAT32 and Puppy uses ext2(if I remember correctly) that it didn't load right. Could this also be why it runs poorly? I haven't tried running a ROM downloaded off the internet yet, just one that was on my old computer.
Lots of emulators
Puppy Arcade has lots of emulators, if you're looking for them.. Can be found here:EmuDan wrote:Excellent. Do you have any other .pets of emulators? I would love some good Linux emulators of the old Ataris, Commodores, Coleco, NES, etc...
Thanks,
Dan
http://www.murga-linux.com/puppy/viewto ... 584#341584
Just installed and it works great on my computer.
The only thing is the netplay internet button is disabled . Any way to fix that? I use this emulator mainly for the netplay between two computers.
If not, maybe an earlier version of ZSNES would have the netplay enabled. I looked at an old thread about 1.4.2 but it is a dotpup and the links do not work anymore.
http://www.murga-linux.com/puppy/viewto ... 544&t=5193
Does anybody have a good version with working netplay?
Thanks!
The only thing is the netplay internet button is disabled . Any way to fix that? I use this emulator mainly for the netplay between two computers.
If not, maybe an earlier version of ZSNES would have the netplay enabled. I looked at an old thread about 1.4.2 but it is a dotpup and the links do not work anymore.
http://www.murga-linux.com/puppy/viewto ... 544&t=5193
Does anybody have a good version with working netplay?
Thanks!
- JoshBeta1
- Posts: 20
- Joined: Sat 04 Jan 2014, 23:27
- Location: Oaxaca de Juárez, Oaxaca, México.
- Contact:
Re: ZSNES Super Nintendo emulator Puppy 4.0 SDL
Your links are broken...ttuuxxx wrote:Another forum member wanted this emulator so I compiled it and made up an icon for it,
First if you don't have SDLl installed, install the package below
Second install the ZSNES pet package
Enjoy::
ttuuxxx
I don't know how to compile. I use Wary 5.5 and I confused. I can't understand none of this thread. I need a verbose explanation for compiling and making a pet archive or at least the pet archives for installing the ZSNES...xD
Let's be clear: I am not a gamer. However, having followed the link from the previous entry, it ends up here: http://murga-linux.com/puppy/viewtopic.php?t=92414
Would it not be easier to download the complete (latest) retro gaming ISO?
Would it not be easier to download the complete (latest) retro gaming ISO?
- JoshBeta1
- Posts: 20
- Joined: Sat 04 Jan 2014, 23:27
- Location: Oaxaca de Juárez, Oaxaca, México.
- Contact:
Well... It seems a radical, drastic solution... Installing another Puppy just for playing a bunch of videogames... Maybe I don't lose anything if I try... When I get to be an expert in Linux...xDFossil wrote:Let's be clear: I am not a gamer. However, having followed the link from the previous entry, it ends up here: http://murga-linux.com/puppy/viewtopic.php?t=92414
Would it not be easier to download the complete (latest) retro gaming ISO?