Unnamed pupplet (puppy411 kernel-2.6.27.5 Xorg-7.4 LXDE)
ok got it.
I had to compile the full kernel.
It seems, I needed /usr/src/linux-2.6.27.5/Module.symvers
This was created then.
Now nvidia.ko loads after I recompiled it
I did not run X with it yet, need some sleep first.
But you can download it here:
http://dotpups.de/diverse-tgz/Nvidia-Ke ... 6.27.5.pet
Install it, and the
NVIDIA-71.86.06-k2.6.25.16.pet for prehistoric cards
from: http://www.murga-linux.com/puppy/viewtopic.php?t=34001
Then pray that it works
I'll report back with more details tomorrow.
Mark
I had to compile the full kernel.
It seems, I needed /usr/src/linux-2.6.27.5/Module.symvers
This was created then.
Now nvidia.ko loads after I recompiled it
I did not run X with it yet, need some sleep first.
But you can download it here:
http://dotpups.de/diverse-tgz/Nvidia-Ke ... 6.27.5.pet
Install it, and the
NVIDIA-71.86.06-k2.6.25.16.pet for prehistoric cards
from: http://www.murga-linux.com/puppy/viewtopic.php?t=34001
Then pray that it works
I'll report back with more details tomorrow.
Mark
oh darned
/var/log/Xorg.0.log
That is closed source, so I doubt there will be a patch?
Mark
/var/log/Xorg.0.log
The kernelmodule loads, but the Xorg module is incompatible with Xorg 7.4.(II) Loading /usr/X11R7/lib/xorg/modules/drivers//nvidia_drv.so
dlopen: /usr/X11R7/lib/xorg/modules/drivers//nvidia_drv.so: undefined symbol: AllocateScreenPrivateIndex
(EE) Failed to load /usr/X11R7/lib/xorg/modules/drivers//nvidia_drv.so
(II) UnloadModule: "nvidia"
(EE) Failed to load module "nvidia" (loader failed, 7)
That is closed source, so I doubt there will be a patch?
Mark
Quad Core
Just a note for you that this pup seems to only recognize 2 cores on a quad core. That is all that show in conky anyway. Great pup though!! I have not figured out how to configure lxde yet. Can't change the global font, wallpaper or position of the menu panel to the bottom.
ndiswrapper for this kernel, WARNING: many windows driver will not work...NDISwrapper is a free software driver wrapper that enables the use of Microsoft Windows drivers for wireless network devices (cards, USB modems, and routers), on Unix-like operating systems, for devices sharing the same architecture only, namely either the Intel x86 architecture or x86_64. NDISwrapper works by implementing the Windows kernel and NDIS APIs, and dynamically linking the driver to this implementation.
I will try to compile a newer version(ndiswrapper) later...
- Attachments
-
- ndiswrapper-svn-r2673-k2.6.27.5.pet
- Source code updated on december 24 2008
- (111.88 KiB) Downloaded 729 times
-
- ndiswrapper-1.53-k2.6.27.5.pet
- (111.61 KiB) Downloaded 699 times
Last edited by wow on Mon 29 Dec 2008, 22:28, edited 1 time in total.
[url=http://www.puppylinux.com][img]http://i.imgur.com/M4OyHe1.gif[/img][/url]
@magerlab: "arrow key not work at all"
Ok, it happens when you change keyboard model with 'xkbconfigmanager' in Xorg-7.4
To fix it comment out 'Option "XkbModel" "pc102"' in /etc/X11/ don't worry about removing this, Xorg-7.4 will autoconfigure your keyboard.I edited ~/.xinitrc to read the keyboard layout from /etc/keymap, 'cause X always try to use the 'us' layout. Please use 'input-wizard'>'Choose keyboard layout for your country' to fix this.
_________________________________________________________________
@iscraigh: Edit /etc/xdg/lxsession/LXDE/autostart more info: http://wiki.lxde.org/en/LXSession
@techtype: My Conky cofig file only add the 2nd cpu if detected. To add more edit: /etc/conky/conky.conf Example(untested):
@MU, I used to have a GeForce2, it works with the 96.xx.xx driver. BTW, try to extract the kernel module source code from nVidia installer with something like:
Go to NVIDIA-Linux-x86-96.43.07-pkg1/src and look for any text file explaining how to compile the kernel module.
I'm downloading NVIDIA-Linux-x86-96.43.07-pkg1 (new legacy) driver, I'll make a dotpet tomorrow (22:03 here)
Use 'lxsession-edit' to get rid of xcompmgr and conky at startup (Menu>Preferences>Desktop Session Settings)
Ok, it happens when you change keyboard model with 'xkbconfigmanager' in Xorg-7.4
To fix it comment out 'Option "XkbModel" "pc102"' in /etc/X11/ don't worry about removing this, Xorg-7.4 will autoconfigure your keyboard.
Code: Select all
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
# Option "XkbModel" "pc102"
Option "XkbLayout" "es" #xkeymap0
EndSection
_________________________________________________________________
@iscraigh: Edit /etc/xdg/lxsession/LXDE/autostart more info: http://wiki.lxde.org/en/LXSession
@techtype: My Conky cofig file only add the 2nd cpu if detected. To add more edit: /etc/conky/conky.conf Example(untested):
Code: Select all
...
TEXT
${font Zekton:size=20}puppy linux ${pre_exec head /etc/puppyversion -c 3 | sed 's/[0-9]/&./'}
${font Zekton:size=14}$alignr${execi 4 expr `calcfreespace.sh` / 1024} MB Free
${font Zekton:size=10}
${pre_exec cat /proc/cpuinfo | grep 'model name' | sed -e 's/model name.*: //' | head -1}}
CPU 1: ${cpu cpu1}%
${color lightgray}${cpubar cpu1 7,168}$color
${if_existing /proc/acpi/processor/CPU1/info}CPU 2: ${cpu cpu2}%
${color lightgray}${cpubar cpu2 7,168}$color
$endif
${if_existing /proc/acpi/processor/CPU2/info}CPU 3: ${cpu cpu3}%
${color lightgray}${cpubar cpu3 7,168}$color
$endif
${if_existing /proc/acpi/processor/CPU3/info}CPU 4: ${cpu cpu4}%
${color lightgray}${cpubar cpu4 7,168}$color
$endif
RAM: $memperc%
...
Code: Select all
sh NVIDIA-Linux-x86-96.43.07-pkg1.run -x
I'm downloading NVIDIA-Linux-x86-96.43.07-pkg1 (new legacy) driver, I'll make a dotpet tomorrow (22:03 here)
Use 'lxsession-edit' to get rid of xcompmgr and conky at startup (Menu>Preferences>Desktop Session Settings)
[url=http://www.puppylinux.com][img]http://i.imgur.com/M4OyHe1.gif[/img][/url]
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
UP WOW
very cool!
It certainly is.
Woof Woof
Remember to read the warnings, first post in this thread - this might not work on every machine
I am using an AMD 5000+ 64 bit dual core with Nvdia GF 7050 integrated and 1GB of DDR2 (I have been a good crustacean and Santa came early)
I was impressed with the look and feel - reminded me of GrafPup which I think used this or a similar Window Manager . . . http://www.grafpup.org/
So it looks great
Let us put Unnamed Puplet through its paces . . .
It took me a while to find the Puppy menus (top left - Duh!)
and I moved this to the bottom and the bottom to the top (via the right)
Now I could connect to the net . . .
- usual couple of Puppy clicks and I am auto DHCP and net enabled
I used the Firefox SFS using the bootmanager option
I downloaded the suggested Nvidia graphics support
and the Mesa (open GL) SFS - again used Bootmanager to enable
and ran SecondLife
Done.
OK let us try this lxlauncher thing . . .
Done - I lost Conky AND for the first time ever
I want conky back - Conky always looked intrusive, this implementation seemed integrated.
Anyway lxlauncher runs from the command line and I look forward to lxlauncher as default in the next release or easy to access?
It reminds me of the Xandros interface on the Eeepc
which is designed for people even stupider than me (that is Windows Users and other semi conscious computer users) Excellent ease of use
Name suggestions:
Unnamed Puplet = UP = UltraPup or WOW = World Of Wowcraft
Last edited by Lobster on Wed 17 Dec 2008, 19:14, edited 1 time in total.
You said that arrow keys doesn't work at all? it happens any time or only with certain apps? Please tell me more.
i noticed that arrows stop to work when i add ru keymap
also i still do not understand why russian keymap disappears after exit from X and why ru_winkeys( the most popular keymap) is not listed in add keymap dialog
pcmanfm is very useful with it's tabs
i also tryed to boot on EEE PC( wifi is recognized but tuochpad do not work properly)
is it possible to include russian UTF-8 locale into iso ?
i noticed that arrows stop to work when i add ru keymap
also i still do not understand why russian keymap disappears after exit from X and why ru_winkeys( the most popular keymap) is not listed in add keymap dialog
pcmanfm is very useful with it's tabs
i also tryed to boot on EEE PC( wifi is recognized but tuochpad do not work properly)
is it possible to include russian UTF-8 locale into iso ?
@MU: I installed NVIDIA-Linux-x86-96.43.07-pkg1.run (it can't be easily compiled, you must edit the source code) and got the same error on Xorg:
@Lobster: Use 'lxsession-edit' to enable/disable conky/xcompmgr/lxlauncher at startup (Menu>Preferences>Desktop Session Settings)
@magerlab: I'll make another sfs with all i18n/locale/translations soon.
EDIT, reason typo "can't be easily..." instead of "can be easily..."
Code: Select all
Loading /usr/X11R7/lib/xorg/modules/drivers//nvidia_drv.so
dlopen: /usr/X11R7/lib/xorg/modules/drivers//nvidia_drv.so: undefined symbol: AllocateScreenPrivateIndex
@magerlab: I'll make another sfs with all i18n/locale/translations soon.
EDIT, reason typo "can't be easily..." instead of "can be easily..."
Last edited by wow on Thu 18 Dec 2008, 00:59, edited 1 time in total.
[url=http://www.puppylinux.com][img]http://i.imgur.com/M4OyHe1.gif[/img][/url]
wow has uploaded the Kernelsource.
I have added 2 pets and some sfs
Screenshot:
full size:
http://noforum.de/pics/Addons-MU.jpg
They are international (include localization).
They were built in Muppy0084 without lzma compression.
So they can be used also in other puplets.
Like this they are slightly larger than needed, e.g. 14 MB instead of 12 MB.
MuppyFiler+Quickmount+Freemem+xscreensize+gqvie
+backgrounds+sfscombiner+clocks+pbdict2_411.sfs (4 MB)
- My filemanager and drivemounter with Gtkbasic and Puppybasic.
- MIME-Editor to edit file associations
- xscreensize to get the screensize in scripts
- gqview is a pictureviewer
- some dark coloured backgrounds
- freememapplet in /root/Startup
- countdowntimer
- alarmclock
- analogclock
- SFS-Combiner to merge several SFS to one
- GtkBasic Panel (the Muppy-panel)
- Pbdict2 (online/offline dictionary with editable dictionaries)
This sfs might be upgraded in future with other small tools.
BUGFIX: REQUIRES:
http://dotpups.de/dotpups/Programming/P ... ic-2.6.pet
Dictionaries-pbdict2-Duden_411.sfs (7 MB)
- german Duden for pbdict2
Gnumeric182_411.sfs (14 MB)
- the Gnome spreadsheet
Python252+gdesklets_411.sfs (25 MB)
- Python_cssm and gdeskletts with 200 clockfaces
Opera-9.62+qt338b+qt-polymer_411.sfs (11 MB)
- Opera 9.62
- QT libraries needed by Opera
- QT theme to give QT a nicer look
Gimp-2.6.1_411.sfs (18 MB)
- the Gnu Image Manipulation Program
OO3-DE-US-FR-NL-IT_411.sfs (230 MB)
- OpenOffice 3 in 5 languages
kde3510_411.sfs (355 MB)
- KDE full from Muppy, english, french, german, dutch
REQUIRED:
* kde-3.5.10-libs_411.sfs
* Opera-9.62+qt338b+qt-polymer_411.sfs
RECOMMENDED for full functionality:
* Xaralx+Imagemagick637_411.sfs
* Python252+gdesklets_411.sfs
kde-3.5.10-libs_411.sfs (1 MB)
- adds missing libraries for KDE
This sfs might be updated on request, it is no checked in detail yet.
Xaralx+Imagemagick637_411.sfs (20 MB)
- Xara is a vectorgrafics drawing program
- imagemagick is a set of tools for imagemanipulation
Gamecollection01+libSDL_411.sfs (69 MB)
- abuse
- AceOfPenguins
- brickshooter-0.04-i486
- descent2
- dreamchess
- dwarfconnect4-1.0-i486
- eggchess
- flashgames
- freecell
- frogger-1.1
- gltron
- gsodoku
- kraptor
- lbreakout
- ltris
- mahjongg3d-0.96-i486
- mahjongx
- pacman
- pinball
- pinball-edit
- seahaven
- stormbaan
- timidity
- tkhearts
- touchmegames-0.2.2-i486
- tuxracer
- xgalaga-2.1.1.0-i486
- xgalaga-plusplus-0.7-i486
- xgammon
- xmgobang-0.52-i486
- xpat2
- xsoldier-1.4
- xtux
- zaxxon
- libSDL 1.2.13 with addons
Most games also need (see first message in this thread):
[More video drivers(opensource), 2D and 3D acceleration ]
or:
[nVidia drivers for Geforce 6 and newer gpus]
filemnt-patched.pet
- filemnt from Muppy, as I could not mount 2fs files with Puppys one.
Revised by wow.
gxmessage+yaf-splash-patched.pet
- replaces xmessage and yaf-splash with gxmessage, needed to display international UTF8 characters
Download:
http://puppyisos.org/isos/2008-07-to-12 ... .5/iso-01/
Get the current password from this message:
http://murga-linux.com/puppy/viewtopic.php?t=28930
Mark
-----------------------------------------------------Another SFS packed with SquashfsLZMA:
linux-2.6.27.5-patched-Nov-12-2008.sfs
linux-2.6.27.5-patched-Nov-12-2008.sfs.md5
Ready to compile new proprietary drivers (I ran "make clean && make oldconfig && make prepare" before made the sfs file)
I have added 2 pets and some sfs
Screenshot:
full size:
http://noforum.de/pics/Addons-MU.jpg
They are international (include localization).
They were built in Muppy0084 without lzma compression.
So they can be used also in other puplets.
Like this they are slightly larger than needed, e.g. 14 MB instead of 12 MB.
MuppyFiler+Quickmount+Freemem+xscreensize+gqvie
+backgrounds+sfscombiner+clocks+pbdict2_411.sfs (4 MB)
- My filemanager and drivemounter with Gtkbasic and Puppybasic.
- MIME-Editor to edit file associations
- xscreensize to get the screensize in scripts
- gqview is a pictureviewer
- some dark coloured backgrounds
- freememapplet in /root/Startup
- countdowntimer
- alarmclock
- analogclock
- SFS-Combiner to merge several SFS to one
- GtkBasic Panel (the Muppy-panel)
- Pbdict2 (online/offline dictionary with editable dictionaries)
This sfs might be upgraded in future with other small tools.
BUGFIX: REQUIRES:
http://dotpups.de/dotpups/Programming/P ... ic-2.6.pet
Dictionaries-pbdict2-Duden_411.sfs (7 MB)
- german Duden for pbdict2
Gnumeric182_411.sfs (14 MB)
- the Gnome spreadsheet
Python252+gdesklets_411.sfs (25 MB)
- Python_cssm and gdeskletts with 200 clockfaces
Opera-9.62+qt338b+qt-polymer_411.sfs (11 MB)
- Opera 9.62
- QT libraries needed by Opera
- QT theme to give QT a nicer look
Gimp-2.6.1_411.sfs (18 MB)
- the Gnu Image Manipulation Program
OO3-DE-US-FR-NL-IT_411.sfs (230 MB)
- OpenOffice 3 in 5 languages
kde3510_411.sfs (355 MB)
- KDE full from Muppy, english, french, german, dutch
REQUIRED:
* kde-3.5.10-libs_411.sfs
* Opera-9.62+qt338b+qt-polymer_411.sfs
RECOMMENDED for full functionality:
* Xaralx+Imagemagick637_411.sfs
* Python252+gdesklets_411.sfs
kde-3.5.10-libs_411.sfs (1 MB)
- adds missing libraries for KDE
This sfs might be updated on request, it is no checked in detail yet.
Xaralx+Imagemagick637_411.sfs (20 MB)
- Xara is a vectorgrafics drawing program
- imagemagick is a set of tools for imagemanipulation
Gamecollection01+libSDL_411.sfs (69 MB)
- abuse
- AceOfPenguins
- brickshooter-0.04-i486
- descent2
- dreamchess
- dwarfconnect4-1.0-i486
- eggchess
- flashgames
- freecell
- frogger-1.1
- gltron
- gsodoku
- kraptor
- lbreakout
- ltris
- mahjongg3d-0.96-i486
- mahjongx
- pacman
- pinball
- pinball-edit
- seahaven
- stormbaan
- timidity
- tkhearts
- touchmegames-0.2.2-i486
- tuxracer
- xgalaga-2.1.1.0-i486
- xgalaga-plusplus-0.7-i486
- xgammon
- xmgobang-0.52-i486
- xpat2
- xsoldier-1.4
- xtux
- zaxxon
- libSDL 1.2.13 with addons
Most games also need (see first message in this thread):
[More video drivers(opensource), 2D and 3D acceleration ]
or:
[nVidia drivers for Geforce 6 and newer gpus]
filemnt-patched.pet
- filemnt from Muppy, as I could not mount 2fs files with Puppys one.
Revised by wow.
gxmessage+yaf-splash-patched.pet
- replaces xmessage and yaf-splash with gxmessage, needed to display international UTF8 characters
Download:
http://puppyisos.org/isos/2008-07-to-12 ... .5/iso-01/
Get the current password from this message:
http://murga-linux.com/puppy/viewtopic.php?t=28930
Mark
Last edited by MU on Tue 23 Dec 2008, 18:54, edited 4 times in total.
Excellent MU, I'll link them to the first post ASAP (BTW I'm writing this from your Opera sfs on my usb flash drive)
Something else, I edited /usr/sbin/filemnt to work with the current FileManager (example, if you're running konqueror filemnt will open the mounted folder with konqueror)
Thank you
Something else, I edited /usr/sbin/filemnt to work with the current FileManager (example, if you're running konqueror filemnt will open the mounted folder with konqueror)
Thank you
[url=http://www.puppylinux.com][img]http://i.imgur.com/M4OyHe1.gif[/img][/url]
I see.
I will have a closer look when I am offline visiting my mother:
http://www.murga-linux.com/puppy/viewtopic.php?t=36802
I could use a renamed filemnt for Muppyfiler then.
There also might be further small glitches.
E.g. in Muppy, I ran KDE from a script.
When you logged out KDE, a small utility was run, allowing to reboot or other options.
These are some tools I could not quickly port yet, so I will do that while I'm offline
Wish you all the best, please note, that from friday on, I cannot mirror files until I'm back.
But you could post the ftp access data if you need temporary space, so people can download via ftp directly from the incoming folder where you usually upload. But at moment it will be better to use filefront instead.
Mark
I will have a closer look when I am offline visiting my mother:
http://www.murga-linux.com/puppy/viewtopic.php?t=36802
I could use a renamed filemnt for Muppyfiler then.
There also might be further small glitches.
E.g. in Muppy, I ran KDE from a script.
When you logged out KDE, a small utility was run, allowing to reboot or other options.
These are some tools I could not quickly port yet, so I will do that while I'm offline
Wish you all the best, please note, that from friday on, I cannot mirror files until I'm back.
But you could post the ftp access data if you need temporary space, so people can download via ftp directly from the incoming folder where you usually upload. But at moment it will be better to use filefront instead.
Mark
I modified your filemnt script, now it works with pcmanfm:
Code: Select all
#!/bin/bash
############## ROX app.: Click image files to mount & unmount. by: Terry Becker aka: SunBurnt
############## File types = ".2fs, .3fs, .sfs, .iso, & initrd.gz".
# 4.00+LXDE wow: Added support for other file managers (basic implementation)
FILEMGR='rox -d' # use rox by default
# check if a file manager is running and launch it in this order (lightweight to heavy)
# example: if filemnt is launched from a ROX-Filer window and PCmanFM is running, the mounted file will be open in a new PCmanFM tab/window.
pgrep pcmanfm > /dev/null && FILEMGR='pcmanfm -t'
pgrep thunar > /dev/null && FILEMGR=thunar
pgrep nautilus > /dev/null && FILEMGR='nautilus --no-desktop'
pgrep konqueror > /dev/null && FILEMGR=`konqueror`
imgFile="$1"
if [ -z "$imgFile" ] ;then exit 1 ;fi
if [ "`dirname $imgFile`" = '\.' ] ;then
imgFile="`pwd``echo $imgFile |sed 's/^\.//'`"
fi
MntPt='/mnt/'`echo "$imgFile" |sed "s#^\.##g" |sed "s#/#+#g"`
if [ 1 -eq 2 ] ;then ############################################## JUMP OVER this SECTION.
loMnts="`mount |grep '/dev/loop' |awk '{print $1}'`"
echo "$loMnts" |while read LOOP ### test if file's mounted
do
loFile="`losetup-FULL $LOOP |sed 's/^.*(//' |sed 's/).*$//'`"
if [ "$loFile" = "$imgFile" ] ;then
echo -e "\n ### Loop File: $loFile"
break
fi
i=`expr $i + 1`
done
fi ############################################## END of JUMP SECTION.
### file's not mounted, mount it
# if [ $i -eq 16 ] ;then
imgFileBASE="`basename "$imgFile"`" #BK
if [ ! -d "$MntPt" ] ;then
#BK check if already mounted elsewhere...
for ONELOOP in `mount | grep '^/dev/loop' | cut -f 1 -d ' ' | tr '\n' ' '`
do
MNTDIMG="`losetup-FULL $ONELOOP | cut -f 2 -d '(' | cut -f 1 -d ')'`"
IMGBASE="`basename "$MNTDIMG"`"
#echo "IMGBASE=$IMGBASE imgFileBASE=$imgFileBASE" #TEST
#not perfect, but paths may be symlinks...
if [ "$IMGBASE" = "$imgFileBASE" ];then #if [ "$MNTDIMG" = "$imgFile" ];then
xmessage "Sorry $imgFile is already mounted and in-use by Puppy"
exit
fi
done
Ext=`echo "$imgFile" |sed 's/^.*\.//'` # get file type from extention
if [ "$Ext" = '2fs' ] ;then
Type=''
elif [ "$Ext" = '3fs' ] ;then
Type=''
elif [ "$Ext" = 'sfs' ] ;then
Type='-t squashfs'
elif [ "$Ext" = 'iso' ] ;then
Type='-t iso9660'
# BK
#elif [ "$imgFile" = 'initrd.gz' ] ;then
# Type='ext2'
# gunzip $imgFile # handle gzip image file
# imgFile="echo "$imgFile" |sed 's/.gz$//'"
fi
# echo -e "\nimgFile = $imgFile\t\tExt = $Ext"
# echo -e "MntPt = $MntPt\t\tType = $Type\n"
echo -e "\n ### Mount: $imgFile\n"
mkdir -p "$MntPt"
mount-FULL $Type -o loop "$imgFile" "$MntPt"
Err=$?
if [ $Err -eq 0 ] ;then
$FILEMGR "$MntPt" # mount good, run rox filer
yaf-splash -timeout 6 -font "8x16" -outline 0 -margin 4 -bg green -text "SUCCESS! Click $imgFileBASE icon again to unmount it" & #BK
fi
else ### file's mounted, unmount it
rox -D "$MntPt" #BK
umount-FULL "$MntPt"
Err=$?
rmdir "$MntPt"
if [ "basename $imgFile" = 'initrd' ] ;then gzip -9 $imgFile ;fi
yaf-splash -timeout 3 -font "8x16" -outline 0 -margin 4 -bg orange -text "Unmounting $imgFileBASE" #BK
#Xdialog --title " Notice..." --no-button \
# --infobox "
#UnMounting: $imgFile
#" 0 0 2000
echo -e "\n ### UnMount: $imgFile\n"
fi
if [ $Err -gt 0 ] ;then # ERROR: mount/unmount
xmessage -title " ERROR..." " Failed mounting or unmounting. "
fi
[url=http://www.puppylinux.com][img]http://i.imgur.com/M4OyHe1.gif[/img][/url]
I updated 2 of my SFS.
Python252+gdesklets_411.sfs
- The libxml for python was not added correctly
MuppyFiler+Quickmount+Freemem+xscreensize+gqview +backgrounds+sfscombiner+clocks+pbdict2_411.sfs
- it now adds 3 desktop icons:
--- a "System" folder with all the symlinks wow posted here:
http://www.murga-linux.com/puppy/viewto ... 053#258053
Shown in pcmanfm, this looks a bit like the Windows Control Center
--- an icon to reload lxde, from wows posting here:
http://www.murga-linux.com/puppy/viewto ... 197#257197
--- an icon to manage the desktop icons.
This will launch Muppyfiler with the 2 required folders opened, displaying a short text, that you can copy a .desktop file to add it to the desktop.
Mark
Python252+gdesklets_411.sfs
- The libxml for python was not added correctly
MuppyFiler+Quickmount+Freemem+xscreensize+gqview +backgrounds+sfscombiner+clocks+pbdict2_411.sfs
- it now adds 3 desktop icons:
--- a "System" folder with all the symlinks wow posted here:
http://www.murga-linux.com/puppy/viewto ... 053#258053
Shown in pcmanfm, this looks a bit like the Windows Control Center
--- an icon to reload lxde, from wows posting here:
http://www.murga-linux.com/puppy/viewto ... 197#257197
--- an icon to manage the desktop icons.
This will launch Muppyfiler with the 2 required folders opened, displaying a short text, that you can copy a .desktop file to add it to the desktop.
Mark
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
MU tried your new xara but . . .
Code: Select all
# ./xaralx
Segmentation fault
#
Open Office seems OK
Games some working - some not - Tuxracer not - that is a surprise as it works on most things. Descent 2 I got working nicely
Gimp seems OK - menu item is GNU Image Manipulation Program under graphcs in case some are unaware of its full title
Thanks Mark, some great programs - some of the best Open Source programs are now available
I hope to be playing one of the star war games (the Force Unleashed) on the Wii over Christmas.
Lobster + 'The Force' = Jedi Crustacean
MicroSith beware
Have a Great Christmas
ok Lobster, I updated the xara sfs.
This was a bit tricky.
Xara requires some older Gtk libraries.
I added them in a folder /usr/local/Gtk-2.12.9.
To avoid conflicts with other programs, they are usually not used.
Only /usr/bin/xaralx will use them.
These old libraries cannot handle the new rgba option in the Murrina themes (that make the menubar transparent).
So I added the same themes without the rgba option, they are called like this: Murrina-Black-norgba.
The xaralx startscript will automatically use these ones, if one of wows rgba themes is active.
Like this I now can start Xara from the menu, open a drawing, and export it as jpg.
Please let me know, if you find other issues.
Mark
This was a bit tricky.
Xara requires some older Gtk libraries.
I added them in a folder /usr/local/Gtk-2.12.9.
To avoid conflicts with other programs, they are usually not used.
Only /usr/bin/xaralx will use them.
These old libraries cannot handle the new rgba option in the Murrina themes (that make the menubar transparent).
So I added the same themes without the rgba option, they are called like this: Murrina-Black-norgba.
The xaralx startscript will automatically use these ones, if one of wows rgba themes is active.
Like this I now can start Xara from the menu, open a drawing, and export it as jpg.
Please let me know, if you find other issues.
Mark
updated:
MuppyFiler+Quickmount+Freemem+xscreensize+gqview +backgrounds+sfscombiner+clocks+pbdict2_411.sfs
Changes:
- MuppyFiler now uses pcmanfm (if available) to open files if you doubleclick them. So the freedesktop.org mimetypes are used, not the one from Rox.
- Added my MIME-Editor. With this program you can modify or add mimetypes.
Example: you load the KDE sfs.
Now run the MIME-Editor, and click on "save changes".
This will update the mime-database.
Now you can open for example JPGs with a rightclick in pcmanfm using one of the KDE image programs.
Before the update, the KDE programs are not listed there.
If you right click a file in pcmanfm, and set the default application in the properties, then also Muppyfiler uses this default.
Or you have a file test.abc.
As files with the suffix .abc have no existing mimetype, you can use the MIME-Editor to create a new one like application/abc.
This then can be associated to a program you have to watch .abc files.
The MIME-Editor also includes a small dialog to create new ".desktop" files.
So you could create new ones if required.
I also plan to write a seperate utility to create .desktop files, that loads quicker.
So for example you have a textfile or script, that you want to add to your desktop.
In Rox, you could drag'n'drop it from a filerwindow.
With lxde, this does not work, as it needs a .desktop file in /root/Desktop/.
So we could need a utility, where you can drag files on, that then creates the new required .desktop file there (with the option to edit it).
Rox is more flexible or intuitive in this concern, as the desktop feature in lxde is pretty new.
Mark
MuppyFiler+Quickmount+Freemem+xscreensize+gqview +backgrounds+sfscombiner+clocks+pbdict2_411.sfs
Changes:
- MuppyFiler now uses pcmanfm (if available) to open files if you doubleclick them. So the freedesktop.org mimetypes are used, not the one from Rox.
- Added my MIME-Editor. With this program you can modify or add mimetypes.
Example: you load the KDE sfs.
Now run the MIME-Editor, and click on "save changes".
This will update the mime-database.
Now you can open for example JPGs with a rightclick in pcmanfm using one of the KDE image programs.
Before the update, the KDE programs are not listed there.
If you right click a file in pcmanfm, and set the default application in the properties, then also Muppyfiler uses this default.
Or you have a file test.abc.
As files with the suffix .abc have no existing mimetype, you can use the MIME-Editor to create a new one like application/abc.
This then can be associated to a program you have to watch .abc files.
The MIME-Editor also includes a small dialog to create new ".desktop" files.
So you could create new ones if required.
I also plan to write a seperate utility to create .desktop files, that loads quicker.
So for example you have a textfile or script, that you want to add to your desktop.
In Rox, you could drag'n'drop it from a filerwindow.
With lxde, this does not work, as it needs a .desktop file in /root/Desktop/.
So we could need a utility, where you can drag files on, that then creates the new required .desktop file there (with the option to edit it).
Rox is more flexible or intuitive in this concern, as the desktop feature in lxde is pretty new.
Mark
International support:
Load this SFS file with "bootmanager", reboot and use the "chooselocale" command to switch to your language.
Download:
Contents: translations for:
Load this SFS file with "bootmanager", reboot and use the "chooselocale" command to switch to your language.
Download:
- [lxde-pup411-i18n-r1.sfs] [18.07 MB]
Code: Select all
ae393b7c446535fcd923271166af96a0 lxde-pup411-i18n-r1.sfs
- ayttm-0.5.0-82
abiword-2.6.4
epdfview-r312-svn
leafpad-0.8.15
mp-5.1.0
osmo-0.2.2
atk-1.24.0
galculator-1.3.1
glib-2.18.2
gnome-menus-2.24.1
gtk+-2.14.4
shared-mime-info-0.23
lxappearance-0.2
lxlauncher-0.2
lxpanel-0.3.8.1
lxsession-edit-0.1
lxrandr-svn-r939
lxsession-lite-svn-r939
obconf-2.0.3
openbox-3.4.7.2
pcmanfm-0.5
wget-1.10.2
util-linux-2.12r
sed-4.1.5
grep-2.5.1
gparted-0.3.3
gftp-2.0.18
gettext-0.15
gcc-4.1.2
findutils-4.2.28
e2fsprogs-1.39
coreutils-6.9
glibc-i18n-2.5-noarch (slackware 12)
rox-filer-2.8
- Galculator, There is no translation for "es" but "es_MX". Copy /usr/share/locale/es_MX/LC_MESSAGES/galculator.mo to /usr/share/locale/es/LC_MESSAGES/
[url=http://www.puppylinux.com][img]http://i.imgur.com/M4OyHe1.gif[/img][/url]
BUG: XKB Configuration Manager(xkbconfigmanager) can't successfully set the keyboard layout.
Workaround (Only for Xorg)
Use "setxkbmap" from command line, add this line to the end of your "/root/.xinitrc" file, just before "#exec $CURRENTWM" (around line 172), example for russian:
ru,us: "ru" is the main layout and "us" an alternate layout.
Now install lxpanel-0.3.8.1-xkb_applet-i686.pet (attached below), press the right mouse button over any panel and choose[Add/Remove panel items] -> [Panel Applets] tab and press [Add] -> select [Keyboard layout switcher], press [Add] -> finally restart X (run "restartwm" in terminal)
Workaround (Only for Xorg)
Use "setxkbmap" from command line, add this line to the end of your "/root/.xinitrc" file, just before "#exec $CURRENTWM" (around line 172), example for russian:
Code: Select all
setxkbmap -rules evdev -model evdev -layout ru,us -v
Now install lxpanel-0.3.8.1-xkb_applet-i686.pet (attached below), press the right mouse button over any panel and choose[Add/Remove panel items] -> [Panel Applets] tab and press [Add] -> select [Keyboard layout switcher], press [Add] -> finally restart X (run "restartwm" in terminal)
- Attachments
-
- lxpanel-0.3.8.1-xkb_applet-i686.pet
- Keyboard layout switcher
- (67.46 KiB) Downloaded 723 times
[url=http://www.puppylinux.com][img]http://i.imgur.com/M4OyHe1.gif[/img][/url]