Extra drivers for Puppy 4.1 with 2.6.25.16 kernel
I got wireless working. I booted up unnamed pup 1.1 and it recognized the wireless and loaded the ath5k driver. That's a pup!
So far, I tried 23 different pups and only 2 would boot up on the new presario laptop - all the pups booted up on my other 2 desktops and eee pc,so the burns were good.
One of the things that G_Pup and unnamed pup 1.1 have in common is they both have smp- whatever that is What's going on here?
Don
So far, I tried 23 different pups and only 2 would boot up on the new presario laptop - all the pups booted up on my other 2 desktops and eee pc,so the burns were good.
One of the things that G_Pup and unnamed pup 1.1 have in common is they both have smp- whatever that is What's going on here?
Don
- Dougal
- Posts: 2502
- Joined: Wed 19 Oct 2005, 13:06
- Location: Hell more grotesque than any medieval woodcut
I don't think the support for SMP per se is what makes the difference -- it's the fact that they use a different (most likely newer) kernel than the one in Puppy (and most derivatives).bigbeck wrote: One of the things that G_Pup and unnamed pup 1.1 have in common is they both have smp- whatever that is What's going on here?
What's the ugliest part of your body?
Some say your nose
Some say your toes
But I think it's your mind
Some say your nose
Some say your toes
But I think it's your mind
Maybe I'm misunderstanding something, or something has changed with 4.2, but when I booted 4.2 on my 1002HA, there was certainly no wifi "out-of-the-box." Instead, I get "wireless interface not found" when I use the autoconnect to wireless network feature in the network menu. Will one of these patches fix it?For the ASUS Eee 900A / 901 / 1000 / 1000H / 1000XPH / 1002HA:
Wifi is supported out-of-the-box by the new Ralink rt2860sta module.
Also, what about the multi-touch touchpad on the 1002HA? I want to turn off 'tap-to-click' as discussed here: http://reality.sgiweb.org/davea/eeepc.html
Thanks for the hard work, and I hope these issues can be addressed!
Hi tempestuous and thanks a lot for your job.tempestuous wrote:I managed to patch the following wifi drivers in Puppy 4.1.x's 2.6.25.16 kernel.
- prism2_usb
- hostap (Prism2/2.5/3 PCI & Cardbus)
- iwl3945 & iwl4965 (Intel)
- zd1211rw (Zydas)
After installing any of these wifi drivers, reboot.
The setup of these drivers for use with aircrack-ng is explained at the link provided above.
I installed the pet package for iwl4965, but when i try mode monitor i can't:
I tried to install that packet iw-0.9.7 but i don't know how to do it and this is the error:# airmon-ng start wlan0
Interface Chipset Driver
wlan0 Intel 4965AGN iwl4965 - [phy0]
ERROR: Neither the sysfs interface links nor the iw command is available.
Please download and install iw from
http://wireless.kernel.org/download/iw/iw-0.9.7.tar.bz2
wlan1 Ralink 2573 USB rt73usb - [phy1]
Could you make a pet package or modify the iwl4965 pet package to works correctly.# make
GEN version.h
CC iw.o
CC info.o
CC phy.o
CC interface.o
CC station.o
CC util.o
CC mpath.o
CC reg.o
CC mesh.o
CC genl.o
genl.c: In function 'family_handler':
genl.c:43: error: 'CTRL_ATTR_MCAST_GROUPS' undeclared (first use in this function)
genl.c:43: error: (Each undeclared identifier is reported only once
genl.c:43: error: for each function it appears in.)
genl.c:47: error: 'CTRL_ATTR_MCAST_GRP_MAX' undeclared (first use in this function)
genl.c:52: error: 'CTRL_ATTR_MCAST_GRP_NAME' undeclared (first use in this function)
genl.c:53: error: 'CTRL_ATTR_MCAST_GRP_ID' undeclared (first use in this function)
genl.c:47: warning: unused variable 'tb_mcgrp'
make: *** [genl.o] Error 1
Thanks a lot and sorry for my poor english.
- Dougal
- Posts: 2502
- Joined: Wed 19 Oct 2005, 13:06
- Location: Hell more grotesque than any medieval woodcut
I compiled iw a while ago, here it is along with libnl (which it depends on).
- Attachments
-
- iw-0.9.9.pet
- (12.93 KiB) Downloaded 1393 times
-
- libnl-1.1.pet
- (99.76 KiB) Downloaded 1407 times
What's the ugliest part of your body?
Some say your nose
Some say your toes
But I think it's your mind
Some say your nose
Some say your toes
But I think it's your mind
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Well done guys.
But does that mean that the other 35 people who downloaded iwl3945-iwl4965-aircrack-k2.6.25.16 dotpet would have failed to launch the aircrack utilities, too?
If so, I'm stunned that people would download a driver for such a specific purpose, then not bother to report something as obvious as a missing wifi utility such as this! We get some strange behaviour on this forum.
But does that mean that the other 35 people who downloaded iwl3945-iwl4965-aircrack-k2.6.25.16 dotpet would have failed to launch the aircrack utilities, too?
If so, I'm stunned that people would download a driver for such a specific purpose, then not bother to report something as obvious as a missing wifi utility such as this! We get some strange behaviour on this forum.
- Dougal
- Posts: 2502
- Joined: Wed 19 Oct 2005, 13:06
- Location: Hell more grotesque than any medieval woodcut
The errors you got were from undeclared functions, which most likely meant you were missing the header files for libnl (they include a list of functions contained in the library, so the application knows what's there to use).caka wrote:I don't know why i can't compile iw in my system?
This was probably the result of not having libnl...
What's the ugliest part of your body?
Some say your nose
Some say your toes
But I think it's your mind
Some say your nose
Some say your toes
But I think it's your mind
- Dougal
- Posts: 2502
- Joined: Wed 19 Oct 2005, 13:06
- Location: Hell more grotesque than any medieval woodcut
Yeah... whenever you fix something, all these people start popping up saying "we've also had that problem for ages", but they never bothered reporting/investigating it...tempestuous wrote:But does that mean that the other 35 people who downloaded iwl3945-iwl4965-aircrack-k2.6.25.16 dotpet would have failed to launch the aircrack utilities, too?
What's the ugliest part of your body?
Some say your nose
Some say your toes
But I think it's your mind
Some say your nose
Some say your toes
But I think it's your mind
I only want to say THANKS to tempestuous for the job with the wireless drivers. Yo have compiled a lot of them and i couldn't make that job because i have a low knowledge in linux.tempestuous wrote:Well done guys.
But does that mean that the other 35 people who downloaded iwl3945-iwl4965-aircrack-k2.6.25.16 dotpet would have failed to launch the aircrack utilities, too?
If so, I'm stunned that people would download a driver for such a specific purpose, then not bother to report something as obvious as a missing wifi utility such as this! We get some strange behaviour on this forum.
A lot of thanks for your explanation. I like to learn to compile programs and to know why there is an error.Dougal wrote:The errors you got were from undeclared functions, which most likely meant you were missing the header files for libnl (they include a list of functions contained in the library, so the application knows what's there to use).caka wrote:I don't know why i can't compile iw in my system?
This was probably the result of not having libnl...
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Here is an updated version of the snd-hda-intel ALSA audio driver.
I specifically patched it to support the ALC663 variant of Intel HDA-based audio devices, using a patch from here
http://marc.info/?l=linux-kernel&m=121602662531525&w=2
but as you can see from that link, many more updates are included.
Also, I added this latest patch on top of earlier patches for the ALC269 device in recent ASUS Eee models, so this audio driver is now relatively up to date, albeit heavily patched.
If you have an HDA-based audio device which still does not work with this driver, I suggest that you should use a Puppy derivative with newer kernel and newer ALSA audio drivers, such as wow's "Unnamed pupplet (puppy411 kernel-2.6.27.5 Xorg-7.4 LXDE)"
http://www.murga-linux.com/puppy/viewtopic.php?t=36592
or kirk's "Fatdog 112"
http://www.murga-linux.com/puppy/viewtopic.php?t=41102
I specifically patched it to support the ALC663 variant of Intel HDA-based audio devices, using a patch from here
http://marc.info/?l=linux-kernel&m=121602662531525&w=2
but as you can see from that link, many more updates are included.
Also, I added this latest patch on top of earlier patches for the ALC269 device in recent ASUS Eee models, so this audio driver is now relatively up to date, albeit heavily patched.
If you have an HDA-based audio device which still does not work with this driver, I suggest that you should use a Puppy derivative with newer kernel and newer ALSA audio drivers, such as wow's "Unnamed pupplet (puppy411 kernel-2.6.27.5 Xorg-7.4 LXDE)"
http://www.murga-linux.com/puppy/viewtopic.php?t=36592
or kirk's "Fatdog 112"
http://www.murga-linux.com/puppy/viewtopic.php?t=41102
- Attachments
-
- snd-hda-intel-patchedApril09-k2.6.29.16.pet
- for Puppy 4.1.x
- (120.5 KiB) Downloaded 927 times
I'm not sure this is the proper place to post this but I was redirected here from another post so here goes...
I have an eBox 3300 but the NIC isn't being detected. I've downloaded the driver from the manufacturer's site but am not sure how to compile it. I'm using Puppy 4.0 but I think this is also an issue with newer versions as well.
Would anyone be able to help me out?
I've attached the source for the r6040 ethernet drivers.
Kind regards.
I have an eBox 3300 but the NIC isn't being detected. I've downloaded the driver from the manufacturer's site but am not sure how to compile it. I'm using Puppy 4.0 but I think this is also an issue with newer versions as well.
Would anyone be able to help me out?
I've attached the source for the r6040 ethernet drivers.
Kind regards.
Last edited by bondo08 on Mon 13 Apr 2009, 20:07, edited 1 time in total.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
I attached the source code for the drivers in my previous message and was hoping someone might be able to compile them for me.tempestuous wrote:Puppy 4.0 has an older kernel, and does not contain the "r6040" ethernet driver.
I would upgrade but that isn't an option right now. I've customized 4.0 quite a lot and am unable to upgrade to the newer version for a while.tempestuous wrote:I suggest you use Puppy 4.1.2.
I'm really hoping there is a way to get it working in Puppy 4.0. Thx.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Then your request should go in the forum thread which deals with that earlier kernel;bondo08 wrote:I'm really hoping there is a way to get it working in Puppy 4.0.
"Extras for Puppy 3.x and 4.0"
http://www.murga-linux.com/puppy/viewto ... 970#294970
r6040 driver now attached there.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Here is the "w35und" driver for the Winbond W89C35D wifi device, which is apparently found in certain Koshinja laptops.
The source code is from
http://code.google.com/p/winbondport/
After installing this dotpet, reboot.
Puppy should automatically load the w35und driver, but if not, you can load it from the Network Wizard.
The source code is from
http://code.google.com/p/winbondport/
After installing this dotpet, reboot.
Puppy should automatically load the w35und driver, but if not, you can load it from the Network Wizard.
- Attachments
-
- w35und-030408-k2.6.25.16.pet
- for Puppy 4.1.x
- (116.09 KiB) Downloaded 896 times
-
- Posts: 5
- Joined: Sun 05 Apr 2009, 17:25
Thank you so much Tempestuous, module loaded, seems to be working, but I cannot connect to internet via wireless. LAN ethernet works fine, as usual... what should I do to make it work? I'm so excited since I've been trying ti load the module since 6 months ago!
I will appreciate any suggestion.
Best.
I will appreciate any suggestion.
Best.