I have been working with the Alsa sound Wizard and all good until it gets to the Mixer configuration. The wizard is so fast that it is hard to see in the Alsaconf box what errors is going on. My question is, there a way to either single step through the script or stop the config so that I can read the errors?
I have added options=snd-hda-intel model=Idt
options=snd-hda-intel enable_msi=1 in the modprobe.conf
I probably will not have sound until I take care of the errors.
No Sound hp mini 1000
-
- Posts: 2
- Joined: Sat 30 Aug 2008, 12:48
No sound hp mini 1000
I am trying to work between Ubuntu Hardy forums puppy forum to find out how ubuntu have the sound set up and working. Not sure what and where to look. If some one could give me a little hint of what files to look would be most helpful.
Are you sure your using the right modules for your sound card? If so, for Puppy, you need to open /etc/modprobe.conf and delete the last bit that's added by Alsacorf, the bit that looks like this;
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.16 ---
alias snd-card-0 snd-sbawe
alias sound-slot-0 snd-sbawe
# --- END: Generated by ALSACONF, do not edit. ---
Then reboot. Once you've rebooted you shouldn't have any sound modules loaded, you can check with 'lsmod' from the command line.
Then you'll need to load the right modules from the command line. I'm not sure which one's your using, I'm guessing 'snd-intel8x0' but I'm not sure so I'll give you an example with mine.
If something goes wrong you should get a message 'fatal error' of some sort. Not sure what to do if you do get these, but you can check 'lsmod' again to see if anything loaded, also 'dmesg' will show you if something was loaded successfully. You could check the module's dependencies by opening /lib/modules/2.6.25.16/modules.dep scroll down to your module and that whole line tells you what's needed. See if it matches the lsmod output.
Other than that I'm not much help, but if you do find other modules that are loaded as well as yours, they might be conflicting. you could blacklist them via Menu/Setup/PuppyControlPanel/BootConfig but only if they're not already loaded, so either delete the end bit of /etc/modprobe.conf again and reboot or edit /etc/rc.d/rc.local and put in the code to blacklist the module. Example; sbin/modprobe -r pcspkr which removes the pcspkr.
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.16 ---
alias snd-card-0 snd-sbawe
alias sound-slot-0 snd-sbawe
# --- END: Generated by ALSACONF, do not edit. ---
Then reboot. Once you've rebooted you shouldn't have any sound modules loaded, you can check with 'lsmod' from the command line.
Then you'll need to load the right modules from the command line. I'm not sure which one's your using, I'm guessing 'snd-intel8x0' but I'm not sure so I'll give you an example with mine.
Code: Select all
modprobe snd
modprobe snd-sbawe
Other than that I'm not much help, but if you do find other modules that are loaded as well as yours, they might be conflicting. you could blacklist them via Menu/Setup/PuppyControlPanel/BootConfig but only if they're not already loaded, so either delete the end bit of /etc/modprobe.conf again and reboot or edit /etc/rc.d/rc.local and put in the code to blacklist the module. Example; sbin/modprobe -r pcspkr which removes the pcspkr.
- never_stop_learning
- Posts: 65
- Joined: Fri 07 Jul 2006, 16:39
- never_stop_learning
- Posts: 65
- Joined: Fri 07 Jul 2006, 16:39
Generally speaking in puppy...
MENU --> Setup --> ALSA Sound Wizard
On popup 'Adjust levels'
The routine is keyboard only using arrows and ESC key when done. One of the selections to the right is "Auto Mut". Press down-arrow to disable the mute.
For netbooks generally the nb-speakers are turned down in favor of headphones. So settings like 84/84/10/85/0/0/disabled work fine. Down in the tray the <))) icon can still adjust final volume.
MENU --> Setup --> ALSA Sound Wizard
On popup 'Adjust levels'
The routine is keyboard only using arrows and ESC key when done. One of the selections to the right is "Auto Mut". Press down-arrow to disable the mute.
For netbooks generally the nb-speakers are turned down in favor of headphones. So settings like 84/84/10/85/0/0/disabled work fine. Down in the tray the <))) icon can still adjust final volume.
Linux user #498913 "Some people need to reimagine their thinking."
"Zuckerberg: a large city inhabited by mentally challenged people."
"Zuckerberg: a large city inhabited by mentally challenged people."
What does setvol terminal command control?
If I
setvol 0 30
it doesn't reduce the sound level to 30%
If I
setvol 0 30
it doesn't reduce the sound level to 30%
[size=75]( ͡° ͜ʖ ͡°) :wq[/size]
[url=http://murga-linux.com/puppy/viewtopic.php?p=1028256#1028256][size=75]Fatdog multi-session usb[/url][/size]
[size=75][url=https://hashbang.sh]echo url|sed -e 's/^/(c/' -e 's/$/ hashbang.sh)/'|sh[/url][/size]
[url=http://murga-linux.com/puppy/viewtopic.php?p=1028256#1028256][size=75]Fatdog multi-session usb[/url][/size]
[size=75][url=https://hashbang.sh]echo url|sed -e 's/^/(c/' -e 's/$/ hashbang.sh)/'|sh[/url][/size]