During slideshow screen went black
During slideshow screen went black
Hello. Does anyone know how to disable that screen never goes black, never comes up screen saver, never standby and so on... ? I can't find power manager in Puppy. Can anyone expalain me how to do that ?
I've checked bios. there is Video Off Method. The options are "V/HSYNCH Blank", "DPMS" and "Blank Only". http://www.tweaktown.com/articles/192/b ... dex11.html but switching those modes does not help..
Did you dry rjbrewer's suggestion?
I don't think the setting is remembered when you reboot, so you would have to put the right command (I think from memory it is`xset s off`) in a startup script e.g. a script in /root/Startup.
I don't think the setting is remembered when you reboot, so you would have to put the right command (I think from memory it is`xset s off`) in a startup script e.g. a script in /root/Startup.
Do you know a good gtkdialog program? Please post a link here
Classic Puppy quotes
ROOT FOREVER
GTK2 FOREVER
Classic Puppy quotes
ROOT FOREVER
GTK2 FOREVER
Screen Still Goes Black
The check box in the upper left is "Enable Screen Saver". Un-checking that box has no effect what so ever. The screen still goes black after 20 minutes.Menu>desktop>pupx>screensaver.
Uncheck box in upper left>click okay
The Bios power management settings have all been disabled...No change.... The screen still goes black after 2o minutes of idle. As a validation that power management was not the culprit here I re-booted into Ubuntu. Ubuntu has a slideshow option call "picture Folder" in the screen saver, it ran continuously for 1 and 1/2 hours before I moved the mouse, during which time the screen never went black.You might also check your BIOS power settings.
Sometimes it has an option to blank the screen after a certain period of time.
I created a new script in /root/startup, the script was "xset s off" .... No change, the screen still goes black after 20 minutes.`xset s off`) in a startup script e.g. a script in /root/Startup
Is there another option that I am overlooking? If so then what?
Did you restart X after checking it?Un-checking that box has no effect what so ever.
Do you know a good gtkdialog program? Please post a link here
Classic Puppy quotes
ROOT FOREVER
GTK2 FOREVER
Classic Puppy quotes
ROOT FOREVER
GTK2 FOREVER
Trying to stop the Black Screen from appearing
Thank you for the suggestions, I tried them with the following results;
The "No Blankscreen 1.0" feature was not located under any menu item. I also could not find anything that even resembled it under any of the sub menu's. Please be more explicit as to where that feature is located.
Used xset -dpms to disable and then verified that DPMS was disabled and then let the slideshow screensaver kick in. The black screen took over on schedule.
I then selected from the menu "restart xserver" and then let the slideshow screensaver kick in. The black screen took over on schedule.
I then used the console to verify that DPMS was disabled...it was not.. Restarting Xserver automatically resets DPMS to enable.
OK so what am I missing now?
The "No Blankscreen 1.0" feature was not located under any menu item. I also could not find anything that even resembled it under any of the sub menu's. Please be more explicit as to where that feature is located.
Used xset -dpms to disable and then verified that DPMS was disabled and then let the slideshow screensaver kick in. The black screen took over on schedule.
I then selected from the menu "restart xserver" and then let the slideshow screensaver kick in. The black screen took over on schedule.
I then used the console to verify that DPMS was disabled...it was not.. Restarting Xserver automatically resets DPMS to enable.
OK so what am I missing now?
I'm assuming that the "slideshow screensaver" you are using is PuppyScreensaver. If I have assumed incorrectly, please let me know.
Today I downloaded PuppyScreensaver.pet (and the three other files required to run it on Puppy 4.3.1) and tried to reproduce your symptoms. Unfortunately, I was unable to. For me, it ran for half an hour before I canceled it.
It is interesting that DPMS is being re-enabled at some point. We should determine if that is actually the culprit, or just a red herring.
If you disable DPMS, then verify that it is disabled, then let the screensaver kick in, then stop the screensaver and verify DPMS again, is it still disabled?
How about if you do the same, but wait for the screen to go blank before verifying DPMS again?
(Note that you should not restart the X server while making the above tests.)
After checking the above, you might try this:
xset dpms 0 0 0
That should disable the three DPMS modes, even if DPMS is enabled. (Of course, if something else re-enables those too, or if DPMS is not your problem, this won't help.)
(By the way, these xset commands are all temporary, and won't survive a reboot or restarting the X server. If you find one that works, we'll need to put it in a startup script, or find some other way to make it permanent.)
With a little luck, we'll get this figured out soon.
Today I downloaded PuppyScreensaver.pet (and the three other files required to run it on Puppy 4.3.1) and tried to reproduce your symptoms. Unfortunately, I was unable to. For me, it ran for half an hour before I canceled it.
It is interesting that DPMS is being re-enabled at some point. We should determine if that is actually the culprit, or just a red herring.
If you disable DPMS, then verify that it is disabled, then let the screensaver kick in, then stop the screensaver and verify DPMS again, is it still disabled?
How about if you do the same, but wait for the screen to go blank before verifying DPMS again?
(Note that you should not restart the X server while making the above tests.)
After checking the above, you might try this:
xset dpms 0 0 0
That should disable the three DPMS modes, even if DPMS is enabled. (Of course, if something else re-enables those too, or if DPMS is not your problem, this won't help.)
(By the way, these xset commands are all temporary, and won't survive a reboot or restarting the X server. If you find one that works, we'll need to put it in a startup script, or find some other way to make it permanent.)
With a little luck, we'll get this figured out soon.
Is the screen just going black, or is it actually going blank (so the monitor switches itself off)?
/etc/X11/xorg.conf hasn't somehow got a line like this has it? (not necessarily 5)
/etc/X11/xorg.conf hasn't somehow got a line like this has it?
Code: Select all
Option "OffTime" "5"
Do you know a good gtkdialog program? Please post a link here
Classic Puppy quotes
ROOT FOREVER
GTK2 FOREVER
Classic Puppy quotes
ROOT FOREVER
GTK2 FOREVER
More Test Results - All Negative
npierce
Your assumption is correct....This is the puppy screensaver, However, I am using puppy 4.2
Tests performed this time;
xset -dpms
verified that pdms was disabled
let slideshow kick in
ESC key
verified dpms was still disabled -- it was
let slidshow kick in
let black screen kick in
ESC key
verified dpms was still disabled -- it was
Repeated the above test three times - consistent results
Note: when the screen saver kicks in it centers the curser on the screen, when the black screen kicks in the curser remains in the center of the screen. The black screen is now starting 10 minutes after last mouse movement. prior to tonight it would not start until 20 minutes after the last mouse and it would temporarily bring up the "No Analog Signal" message and the screen would then go completely black as in asleep. The only difference between tonight and the last evenings attemp is that I now have a script "xset s off" in startup. Could that account for this change in the phenomenon?
disciple
With regard to the xorg.conf file; I could not find anything that resembled the line in question, but the screen no-longer turns off as it had. my xorg.conf is as follows;
#Special base config file used in Puppy Linux.
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
Load "freetype"
# This loads xtrap extension, used by xrandr
Load "xtrap"
# This loads the GLX module (if present)
Load "glx"
# This loads dri module (if present)
Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R7/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/X11R7/lib/X11/fonts/misc/"
FontPath "/usr/X11R7/lib/X11/fonts/Type1/"
FontPath "/usr/X11R7/lib/X11/fonts/TTF/"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...
Option "RandR" "on"
EndSection
#everything past here is auto-generated by Puppy's Xorg Wizard...
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "us" #xkeymap0
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
#Option "Emulate3Timeout" "50"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-82
VertRefresh 56-76
#UseModes "Modes0" #monitor0usemodes
Option "PreferredMode" "1280x1024"
EndSection
Section "Modes"
Identifier "Modes0"
#modes0modeline0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "TurboQueue" # [<bool>]
#Option "FastVram" # [<bool>]
#Option "HostBus" # [<bool>]
#Option "RenderAcceleration" # [<bool>]
#Option "ForceCRT1Type" # <str>
#Option "ForceCRT2Type" # <str>
#Option "ShadowFB" # [<bool>]
#Option "DRI" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "Vesa" # [<bool>]
#Option "MaxXFBMem" # <i>
#Option "EnableSiSCtrl" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "UseColorHWCursor" # [<bool>]
#Option "Rotate" # <str>
#Option "Reflect" # <str>
#Option "Xvideo" # [<bool>]
#Option "InternalModes" # [<bool>]
#Option "OverruleFrequencyRanges" # [<bool>]
#Option "RestoreBySetMode" # [<bool>]
#Option "ForceCRT1" # [<bool>]
#Option "XvOnCRT2" # [<bool>]
#Option "PanelDelayCompensation" # <i>
#Option "PDC" # <i>
#Option "PanelDelayCompensation2" # <i>
#Option "PDC2" # <i>
#Option "PanelDelayCompensation1" # <i>
#Option "PDC1" # <i>
#Option "EMI" # <i>
#Option "LVDSHL" # <i>
#Option "ForcePanelRGB" # <i>
#Option "SpecialTiming" # <str>
#Option "TVStandard" # <str>
#Option "UseROMData" # [<bool>]
#Option "UseOEMData" # [<bool>]
#Option "YV12" # [<bool>]
#Option "CHTVType" # [<bool>]
#Option "CHTVOverscan" # [<bool>]
#Option "CHTVSuperOverscan" # [<bool>]
#Option "CHTVLumaBandwidthCVBS" # <i>
#Option "CHTVLumaBandwidthSVIDEO" # <i>
#Option "CHTVLumaFlickerFilter" # <i>
#Option "CHTVChromaBandwidth" # <i>
#Option "CHTVChromaFlickerFilter" # <i>
#Option "CHTVCVBSColor" # [<bool>]
#Option "CHTVTextEnhance" # <i>
#Option "CHTVContrast" # <i>
#Option "SISTVEdgeEnhance" # <i>
#Option "SISTVAntiFlicker" # <str>
#Option "SISTVSaturation" # <i>
#Option "SISTVCFilter" # [<bool>]
#Option "SISTVYFilter" # <i>
#Option "SISTVColorCalibFine" # <i>
#Option "SISTVColorCalibCoarse" # <i>
#Option "SISTVXScale" # <i>
#Option "SISTVYScale" # <i>
#Option "TVXPosOffset" # <i>
#Option "TVYPosOffset" # <i>
#Option "SIS6326TVAntiFlicker" # <str>
#Option "SIS6326TVEnableYFilter" # [<bool>]
#Option "SIS6326TVYFilterStrong" # [<bool>]
#Option "SIS6326TVForcePlug" # <str>
#Option "SIS6326FSCAdjust" # <i>
#Option "YPbPrAspectRatio" # <str>
#Option "TVBlueWorkAround" # [<bool>]
#Option "ColorHWCursorBlending" # [<bool>]
#Option "ColorHWCursorBlendThreshold" # <i>
#Option "CRT2Detection" # [<bool>]
#Option "ForceCRT2ReDetection" # [<bool>]
#Option "SenseYPbPr" # [<bool>]
#Option "CRT1Gamma" # [<bool>]
#Option "CRT2Gamma" # [<str>]
#Option "GammaBrightness" # <str>
#Option "GammaBrightnessCRT2" # <str>
#Option "CRT2GammaBrightness" # <str>
#Option "Brightness" # <str>
#Option "NewGammaBrightness" # <str>
#Option "CRT2Brightness" # <str>
#Option "CRT2NewGammaBrightness" # <str>
#Option "Contrast" # <str>
#Option "NewGammaContrast" # <str>
#Option "CRT2Contrast" # <str>
#Option "CRT2NewGammaContrast" # <str>
#Option "CRT1Saturation" # <i>
#Option "XvGamma" # [<str>]
#Option "XvDefaultContrast" # <i>
#Option "XvDefaultBrightness" # <i>
#Option "XvDefaultHue" # <i>
#Option "XvDefaultSaturation" # <i>
#Option "XvDefaultDisableGfx" # [<bool>]
#Option "XvDefaultDisableGfxLR" # [<bool>]
#Option "XvChromaMin" # <i>
#Option "XvChromaMax" # <i>
#Option "XvUseChromaKey" # [<bool>]
#Option "XvInsideChromaKey" # [<bool>]
#Option "XvYUVChromaKey" # [<bool>]
#Option "XvDisableColorKey" # [<bool>]
#Option "XvUseMemcpy" # [<bool>]
#Option "BenchmarkMemcpy" # [<bool>]
#Option "UseSSE" # [<bool>]
#Option "XvDefaultAdaptor" # <str>
#Option "ScaleLCD" # [<bool>]
#Option "CenterLCD" # [<bool>]
#Option "EnableHotkey" # [<bool>]
#Option "ForceCRT1VGAAspect" # <str>
#Option "ForceCRT2VGAAspect" # <str>
#Option "MergedFB" # [<str>]
#Option "TwinView" # [<str>]
#Option "MergedFBAuto" # [<bool>]
#Option "CRT2HSync" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "CRT2VRefresh" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "CRT2Position" # <str>
#Option "TwinViewOrientation" # <str>
#Option "MetaModes" # <str>
#Option "MergedDPI" # <str>
#Option "MergedXinerama" # [<bool>]
#Option "TwinviewXineramaInfo" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
Identifier "Card0"
Driver "sis" #card0driver
VendorName "Silicon Integrated Systems [SiS]"
BoardName "661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1280x1024"
EndSubsection
EndSection
#PuppyHardwareProfile=SiSLCD_17
Your assumption is correct....This is the puppy screensaver, However, I am using puppy 4.2
Tests performed this time;
xset -dpms
verified that pdms was disabled
let slideshow kick in
ESC key
verified dpms was still disabled -- it was
let slidshow kick in
let black screen kick in
ESC key
verified dpms was still disabled -- it was
Repeated the above test three times - consistent results
Note: when the screen saver kicks in it centers the curser on the screen, when the black screen kicks in the curser remains in the center of the screen. The black screen is now starting 10 minutes after last mouse movement. prior to tonight it would not start until 20 minutes after the last mouse and it would temporarily bring up the "No Analog Signal" message and the screen would then go completely black as in asleep. The only difference between tonight and the last evenings attemp is that I now have a script "xset s off" in startup. Could that account for this change in the phenomenon?
disciple
With regard to the xorg.conf file; I could not find anything that resembled the line in question, but the screen no-longer turns off as it had. my xorg.conf is as follows;
#Special base config file used in Puppy Linux.
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
Load "freetype"
# This loads xtrap extension, used by xrandr
Load "xtrap"
# This loads the GLX module (if present)
Load "glx"
# This loads dri module (if present)
Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R7/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/X11R7/lib/X11/fonts/misc/"
FontPath "/usr/X11R7/lib/X11/fonts/Type1/"
FontPath "/usr/X11R7/lib/X11/fonts/TTF/"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...
Option "RandR" "on"
EndSection
#everything past here is auto-generated by Puppy's Xorg Wizard...
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "us" #xkeymap0
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
#Option "Emulate3Timeout" "50"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-82
VertRefresh 56-76
#UseModes "Modes0" #monitor0usemodes
Option "PreferredMode" "1280x1024"
EndSection
Section "Modes"
Identifier "Modes0"
#modes0modeline0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "TurboQueue" # [<bool>]
#Option "FastVram" # [<bool>]
#Option "HostBus" # [<bool>]
#Option "RenderAcceleration" # [<bool>]
#Option "ForceCRT1Type" # <str>
#Option "ForceCRT2Type" # <str>
#Option "ShadowFB" # [<bool>]
#Option "DRI" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "Vesa" # [<bool>]
#Option "MaxXFBMem" # <i>
#Option "EnableSiSCtrl" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "UseColorHWCursor" # [<bool>]
#Option "Rotate" # <str>
#Option "Reflect" # <str>
#Option "Xvideo" # [<bool>]
#Option "InternalModes" # [<bool>]
#Option "OverruleFrequencyRanges" # [<bool>]
#Option "RestoreBySetMode" # [<bool>]
#Option "ForceCRT1" # [<bool>]
#Option "XvOnCRT2" # [<bool>]
#Option "PanelDelayCompensation" # <i>
#Option "PDC" # <i>
#Option "PanelDelayCompensation2" # <i>
#Option "PDC2" # <i>
#Option "PanelDelayCompensation1" # <i>
#Option "PDC1" # <i>
#Option "EMI" # <i>
#Option "LVDSHL" # <i>
#Option "ForcePanelRGB" # <i>
#Option "SpecialTiming" # <str>
#Option "TVStandard" # <str>
#Option "UseROMData" # [<bool>]
#Option "UseOEMData" # [<bool>]
#Option "YV12" # [<bool>]
#Option "CHTVType" # [<bool>]
#Option "CHTVOverscan" # [<bool>]
#Option "CHTVSuperOverscan" # [<bool>]
#Option "CHTVLumaBandwidthCVBS" # <i>
#Option "CHTVLumaBandwidthSVIDEO" # <i>
#Option "CHTVLumaFlickerFilter" # <i>
#Option "CHTVChromaBandwidth" # <i>
#Option "CHTVChromaFlickerFilter" # <i>
#Option "CHTVCVBSColor" # [<bool>]
#Option "CHTVTextEnhance" # <i>
#Option "CHTVContrast" # <i>
#Option "SISTVEdgeEnhance" # <i>
#Option "SISTVAntiFlicker" # <str>
#Option "SISTVSaturation" # <i>
#Option "SISTVCFilter" # [<bool>]
#Option "SISTVYFilter" # <i>
#Option "SISTVColorCalibFine" # <i>
#Option "SISTVColorCalibCoarse" # <i>
#Option "SISTVXScale" # <i>
#Option "SISTVYScale" # <i>
#Option "TVXPosOffset" # <i>
#Option "TVYPosOffset" # <i>
#Option "SIS6326TVAntiFlicker" # <str>
#Option "SIS6326TVEnableYFilter" # [<bool>]
#Option "SIS6326TVYFilterStrong" # [<bool>]
#Option "SIS6326TVForcePlug" # <str>
#Option "SIS6326FSCAdjust" # <i>
#Option "YPbPrAspectRatio" # <str>
#Option "TVBlueWorkAround" # [<bool>]
#Option "ColorHWCursorBlending" # [<bool>]
#Option "ColorHWCursorBlendThreshold" # <i>
#Option "CRT2Detection" # [<bool>]
#Option "ForceCRT2ReDetection" # [<bool>]
#Option "SenseYPbPr" # [<bool>]
#Option "CRT1Gamma" # [<bool>]
#Option "CRT2Gamma" # [<str>]
#Option "GammaBrightness" # <str>
#Option "GammaBrightnessCRT2" # <str>
#Option "CRT2GammaBrightness" # <str>
#Option "Brightness" # <str>
#Option "NewGammaBrightness" # <str>
#Option "CRT2Brightness" # <str>
#Option "CRT2NewGammaBrightness" # <str>
#Option "Contrast" # <str>
#Option "NewGammaContrast" # <str>
#Option "CRT2Contrast" # <str>
#Option "CRT2NewGammaContrast" # <str>
#Option "CRT1Saturation" # <i>
#Option "XvGamma" # [<str>]
#Option "XvDefaultContrast" # <i>
#Option "XvDefaultBrightness" # <i>
#Option "XvDefaultHue" # <i>
#Option "XvDefaultSaturation" # <i>
#Option "XvDefaultDisableGfx" # [<bool>]
#Option "XvDefaultDisableGfxLR" # [<bool>]
#Option "XvChromaMin" # <i>
#Option "XvChromaMax" # <i>
#Option "XvUseChromaKey" # [<bool>]
#Option "XvInsideChromaKey" # [<bool>]
#Option "XvYUVChromaKey" # [<bool>]
#Option "XvDisableColorKey" # [<bool>]
#Option "XvUseMemcpy" # [<bool>]
#Option "BenchmarkMemcpy" # [<bool>]
#Option "UseSSE" # [<bool>]
#Option "XvDefaultAdaptor" # <str>
#Option "ScaleLCD" # [<bool>]
#Option "CenterLCD" # [<bool>]
#Option "EnableHotkey" # [<bool>]
#Option "ForceCRT1VGAAspect" # <str>
#Option "ForceCRT2VGAAspect" # <str>
#Option "MergedFB" # [<str>]
#Option "TwinView" # [<str>]
#Option "MergedFBAuto" # [<bool>]
#Option "CRT2HSync" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "CRT2VRefresh" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "CRT2Position" # <str>
#Option "TwinViewOrientation" # <str>
#Option "MetaModes" # <str>
#Option "MergedDPI" # <str>
#Option "MergedXinerama" # [<bool>]
#Option "TwinviewXineramaInfo" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
Identifier "Card0"
Driver "sis" #card0driver
VendorName "Silicon Integrated Systems [SiS]"
BoardName "661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1280x1024"
EndSubsection
EndSection
#PuppyHardwareProfile=SiSLCD_17
Maybe you could post a list of the programs that are running in the background, so we can see if there is anything unusual, that might be causing this.
Do you know a good gtkdialog program? Please post a link here
Classic Puppy quotes
ROOT FOREVER
GTK2 FOREVER
Classic Puppy quotes
ROOT FOREVER
GTK2 FOREVER
run:The "No Blankscreen 1.0" feature was not located under any menu item. I also could not find anything that even resembled it under any of the sub menu's. Please be more explicit as to where that feature is located.
Code: Select all
fixmenus
Battling with the Black screen
Disciple
trio
You just went over my head, so I guessed that RUN: fixmenus means open a consule window and type fixmenus and hit enter (did that) as far as restart windows manager...I guessed that meant restart JWM (did that) Nothing changed. What was I really supposed to do here?
I do not know how to do this. How do I obtain a list of running programs?Maybe you could post a list of the programs that are running in the background, so we can see if there is anything unusual, that might be causing this.
trio
You just went over my head, so I guessed that RUN: fixmenus means open a consule window and type fixmenus and hit enter (did that) as far as restart windows manager...I guessed that meant restart JWM (did that) Nothing changed. What was I really supposed to do here?
well, that's how you do it. If I remember correctly menu item should be under desktop group. Anyway, what puppy are you on?
Another way is to run:
Another way is to run:
Code: Select all
noblankscreen
Okay, it looks like there are at least a couple of problems happening here, and the combination of their symptoms makes it hard to see either problem clearly.
One problem is the "No Analog Signal" problem, which is probably related to DPMS. But since your screen is now blanking before you get the "No Analog Signal" message, we need to deal with this new problem first.
Your new problem would not be related to DPMS, nor do I think it is related to the "xset s off" in your startup script. If DPMS or the screensaver built into the X server kicked in, you would not still see a cursor on the screen.
Have you recently removed some images or increased the rate at which the images change?
How many image files are in the directory?
Do the images change at the rate of once every 5 seconds? (This is probably the case, since it is the usual rate, and it is not something that you can change in Puppy Screensaver Setup.)
Try the following 3 commands. Note that you will need to use your Esc key (as you do from the screensaver) to exit. Note also that there is a period just before the slash at the end of the second command. Your first image should appear with a pair of numbers in the lower right-hand corner -- for instance "1/246". What numbers do you see?
If the second number is less than 300 or so, your new problem may be related to the screensaver itself.
Finally, when the screensaver goes blank with the cursor still on the screen, or when it "freezes" on one image, what happens when you click the right mouse button?
Depending upon the answers to these questions, I may have a possible solution.
One problem is the "No Analog Signal" problem, which is probably related to DPMS. But since your screen is now blanking before you get the "No Analog Signal" message, we need to deal with this new problem first.
Your new problem would not be related to DPMS, nor do I think it is related to the "xset s off" in your startup script. If DPMS or the screensaver built into the X server kicked in, you would not still see a cursor on the screen.
Have you recently removed some images or increased the rate at which the images change?
How many image files are in the directory?
Do the images change at the rate of once every 5 seconds? (This is probably the case, since it is the usual rate, and it is not something that you can change in Puppy Screensaver Setup.)
Try the following 3 commands. Note that you will need to use your Esc key (as you do from the screensaver) to exit. Note also that there is a period just before the slash at the end of the second command. Your first image should appear with a pair of numbers in the lower right-hand corner -- for instance "1/246". What numbers do you see?
Code: Select all
pushd /usr/local/PuppyBasicScreensaver02/resource/slideshow/
slideshow -name -sort n+ -recurse ./
popd
Finally, when the screensaver goes blank with the cursor still on the screen, or when it "freezes" on one image, what happens when you click the right mouse button?
Depending upon the answers to these questions, I may have a possible solution.