Classic Pup 2.14X -- Updated 2 series
Printing
BOOOOOO No go on printing,,,,in fact strange....
Click printer set up from setup menu or right click set up... first screen is "Usage for x dialog"... looks more like code than anything... asks to print or ok... choose OK... went though the half dozen screens... set up MYprinter... canon... not true... as printer is Brother, but that is what cups says it is ... anyway... open abiword... print to default printer... even insured from Cups that My printer was default.... nothing... simply nothing....
I might note as well... works fine in 4.31.1.... and most other versions. Went to Hardware/Printer-System Information... .NO PRINTER FOUND... I am using a parallel Brother printer.. normally detected...
Click printer set up from setup menu or right click set up... first screen is "Usage for x dialog"... looks more like code than anything... asks to print or ok... choose OK... went though the half dozen screens... set up MYprinter... canon... not true... as printer is Brother, but that is what cups says it is ... anyway... open abiword... print to default printer... even insured from Cups that My printer was default.... nothing... simply nothing....
I might note as well... works fine in 4.31.1.... and most other versions. Went to Hardware/Printer-System Information... .NO PRINTER FOUND... I am using a parallel Brother printer.. normally detected...
zd1211 reminder
Reminder... if you use this today's printer test version for production... it contains the older zd1211 wireless driver and not ther zd1211rw. Thanks.
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Hi Guys this is how I set up printing with the new Cups Gui
ttuuxxx
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
Half a thumbs up
Half.. well I will give you three quarters of a thumbs up... Printer now works.... ONLY IF YOU SET IT AS DEFAULT!
If you follow the directions... it does set up my parallel printer and will print test page and data from abiword. BUT only after going to print set up to set it as default... as the specifically named printer does not show as a printer option when print selected in abiword.
Left Print Manager on the screen to perform test... go back to desktop....and outline-box of Print Manager is displayed... NO information inside of the box????
Changed printer to default... OLD jobs not printing.... will try new print job from abiword...after default is set. ONLY new job printed.. old jobs gone to bit bucket.
Gnumeric prints... assume same as above, since it is using Default... named printer not showing.
If you follow the directions... it does set up my parallel printer and will print test page and data from abiword. BUT only after going to print set up to set it as default... as the specifically named printer does not show as a printer option when print selected in abiword.
Left Print Manager on the screen to perform test... go back to desktop....and outline-box of Print Manager is displayed... NO information inside of the box????
Changed printer to default... OLD jobs not printing.... will try new print job from abiword...after default is set. ONLY new job printed.. old jobs gone to bit bucket.
Gnumeric prints... assume same as above, since it is using Default... named printer not showing.
-
- Posts: 1198
- Joined: Tue 05 Aug 2008, 18:12
- Location: UK
printing
EDIT:
Completely re-edited to make it clearer (hopefully).
Okay so now that I know that Setup>Printer Wizard is to be avoided and to use System>CUPS manage printing instead. Very counter-intuitive. I managed to go through ttuxxx's directions....thanks but still couldn't get my 2 printers to work so went to pup431.1
In Pup431.1 I couldn't find a pre-installed driver for my Samsung ML2010R laser so searched and found one and put in /usr/share/cups/model. Installed and set as default. It worked ie appeared in Abiword>File>Print and printed ok.
Then tried with my HP OfficeJet 6210. No driver for it so found hpliplite-3.9.8-mu-p4.pet and hpijs-2.8.2_static-1.pet. Wasn't sure which to use so installed the latter. Then used cups and it installed and printed ok, appearing as an option in Abiword>File>Print.
Now tried in 214X9.1
Samsung ML2010R: used driver as above and printed okay.
HP couldn't find a hppijs.pet in pet-get so haven't got it working.
But...
Note that in Abiword>File>Print the printers are identified in 431.1 but not in 214X9.1
I have also noticed that in 214X9.1 when I do a "System>CUPS manage printing>Click to install new Printer" the "Puppy Linux Printer Manager" window stays up (as blank) when the web-like CUPs screen starts. Once everything is set up the "Printer Linux Printer Manager screen stays up and sometimes needs killing. This doesn't happen in 431.1 Is a process not completing? Is this the reason the printers are not seen in abiword correctly?
Help
Dave
Completely re-edited to make it clearer (hopefully).
Okay so now that I know that Setup>Printer Wizard is to be avoided and to use System>CUPS manage printing instead. Very counter-intuitive. I managed to go through ttuxxx's directions....thanks but still couldn't get my 2 printers to work so went to pup431.1
In Pup431.1 I couldn't find a pre-installed driver for my Samsung ML2010R laser so searched and found one and put in /usr/share/cups/model. Installed and set as default. It worked ie appeared in Abiword>File>Print and printed ok.
Then tried with my HP OfficeJet 6210. No driver for it so found hpliplite-3.9.8-mu-p4.pet and hpijs-2.8.2_static-1.pet. Wasn't sure which to use so installed the latter. Then used cups and it installed and printed ok, appearing as an option in Abiword>File>Print.
Now tried in 214X9.1
Samsung ML2010R: used driver as above and printed okay.
HP couldn't find a hppijs.pet in pet-get so haven't got it working.
But...
Note that in Abiword>File>Print the printers are identified in 431.1 but not in 214X9.1
I have also noticed that in 214X9.1 when I do a "System>CUPS manage printing>Click to install new Printer" the "Puppy Linux Printer Manager" window stays up (as blank) when the web-like CUPs screen starts. Once everything is set up the "Printer Linux Printer Manager screen stays up and sometimes needs killing. This doesn't happen in 431.1 Is a process not completing? Is this the reason the printers are not seen in abiword correctly?
Help
Dave
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
ok I figured out what wasn't working It was a few drivers I had to compile and test and now look below on the options on abiword, using my directions I posted earlier, Just install the package and then reinstall your printer. Thanks
ttuuxxx
ttuuxxx
- Attachments
-
- abiword-cups.jpg
- (44.76 KiB) Downloaded 1487 times
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
-
- Posts: 1198
- Joined: Tue 05 Aug 2008, 18:12
- Location: UK
ttuuxxx,
Installed your pet and it works great now. Congratulations and thanks.
Specifically, both printers now work, they appear in Abiword>File>Print and the Puppy Linux Printer Manager instability seems to have gone.
So now I tried the (even) harder bit and tried to get my test PC which is connected to the printers over the network to work. And it did without any intervention at all. Great.
I did have to install the HP drivers (see previous post) which was a bit surprising as I thought my HP Officejet was quite common and there is a trivial issue where each printer selection appears many time ( see attached) but fundamentally it's working fine.
I have a suggestion however.
The Puppy Linux Printer Manager says:
And by the way it should be "Once you're finished..."
Cheers and thanks once again.
Dave
Installed your pet and it works great now. Congratulations and thanks.
Specifically, both printers now work, they appear in Abiword>File>Print and the Puppy Linux Printer Manager instability seems to have gone.
So now I tried the (even) harder bit and tried to get my test PC which is connected to the printers over the network to work. And it did without any intervention at all. Great.
I did have to install the HP drivers (see previous post) which was a bit surprising as I thought my HP Officejet was quite common and there is a trivial issue where each printer selection appears many time ( see attached) but fundamentally it's working fine.
I have a suggestion however.
The Puppy Linux Printer Manager says:
If I understand this correctly then I think a novice might do this and not realise they are deleting drivers which they may need in the future. This isn't what happens with the network drivers for example.Once your finished installing the printer..... delete ..extra drivers..
And by the way it should be "Once you're finished..."
Cheers and thanks once again.
Dave
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Naaa its ok to delete them once the driver is installed, Gutenprint has them compressed and when you start the install wizard, it decompress all the drivers into a folder, really that folder should be /tmp but its not built that way. Anyways once the driver is selected its copied to another location, then you have 19MB extra drivers sitting around and they all will be recreated once again when you run the new printer setup. SO deleting anytime after the printer is installed won't harm a thingdavesurrey wrote:ttuuxxx,
If I understand this correctly then I think a novice might do this and not realise they are deleting drivers which they may need in the future. This isn't what happens with the network drivers for example.
And by the way it should be "Once you're finished..."
Cheers and thanks once again.
Dave
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
90% pet fix
90% pet fix... printer now shows in abiword and gnumeric, printer prints.
part: As long as cups set up, is still active the Puppy Linux Printer Manager remains a blank box.
2) As per earlier versions of x9... if you put a single letter in the first A column of the spread sheet.. such as
a
a
b
b
b
THIS WILL NOT print.. as the left margin is not defaulted correctly. TTUUXXX you fixed this in a later version... you can see it happening if you select print preview.
And I have to remind you about ZD1211rw for the next version.
Trust the cold is a history issue? Keep well... get some rest...
part: As long as cups set up, is still active the Puppy Linux Printer Manager remains a blank box.
2) As per earlier versions of x9... if you put a single letter in the first A column of the spread sheet.. such as
a
a
b
b
b
THIS WILL NOT print.. as the left margin is not defaulted correctly. TTUUXXX you fixed this in a later version... you can see it happening if you select print preview.
And I have to remind you about ZD1211rw for the next version.
Trust the cold is a history issue? Keep well... get some rest...
-
- Posts: 1198
- Joined: Tue 05 Aug 2008, 18:12
- Location: UK
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Re: 90% pet fix
Minnesota wrote: 90% pet fix... printer now shows in abiword and gnumeric, printer prints.
part: As long as cups set up, is still active the Puppy Linux Printer Manager remains a blank box. (I'll Look into that, strange it works fine on 4.31 and not 2.14X, Its 100% the same script. )
2) As per earlier versions of x9... if you put a single letter in the first A column of the spread sheet.. such as
a
a
b
b
b
THIS WILL NOT print.. as the left margin is not defaulted correctly. TTUUXXX you fixed this in a later version... you can see it happening if you select print preview. (2.14x-v9.1 is only 2.14x-v9 plus printing upgrade, the other fixes seen in higher releases will come Soon
And I have to remind you about ZD1211rw for the next version. (Thanks for reminding me,
Trust the cold is a history issue? Keep well... get some rest... Not yet, really chesty, That's why I haven't been on here much
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Hi Guys found something today I didn't think I would, lol and nooooo its not my brain, lol
Anyways a complete replacement for Galculator and then some
This calculator should be about 4 times the size, its suppose to use a lot of needed Gnome files, but I messed around with the sources and managed to get it working without any extra deps, which is excellent, keeps the size really small, well a bit bigger than Galculator but not much.
I have it set as a basic calculator, but then click the view button.
-basic
-advanced
-Financial
-scientific
-Programming
enjoy
ttuuxxx
Anyways a complete replacement for Galculator and then some
This calculator should be about 4 times the size, its suppose to use a lot of needed Gnome files, but I messed around with the sources and managed to get it working without any extra deps, which is excellent, keeps the size really small, well a bit bigger than Galculator but not much.
I have it set as a basic calculator, but then click the view button.
-basic
-advanced
-Financial
-scientific
-Programming
enjoy
ttuuxxx
- Attachments
-
- 1.jpg
- (21.59 KiB) Downloaded 1395 times
-
- gcalctool-5.28.0-i386.pet
- (114.52 KiB) Downloaded 469 times
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
LOL I went to this site and it said "Free Online Calculator" lol they said it was free, lol. it was flash based, so downloaded and made a menu item etc, Well I can't put it into this release since Its not gpl, but you can try it if you like, lolsinc wrote:i'm probably the only person on here that could use it but any chance of a graphing calculator? i think there's a ti-83 or ti-84 program. if not, whatever, but i would use it.
ttuuxxx
- Attachments
-
- GraphCalculator.pet
- (69.35 KiB) Downloaded 504 times
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- MinHundHettePerro
- Posts: 852
- Joined: Thu 05 Feb 2009, 22:22
- Location: SE
Keyboard Layout
Greetings!
After an unusually hard week, workwise, I finally had some time so look into the keyboard setter issue.
I made some patch & stitch work, so as to utilise the working parts and hide the non-working parts .
Since I found that button 2 in the keyb. setter worked in xvesa (after a restartwm command) I replaced the non-working button 1, and button 2 with one that chooses the script from former button 2 or button 3, depending on if xorg or xvesa is running. If xorg is running, the chosen keymap code is also written to /etc/keymap, so it will be reported on the boot-screen.
Also, before, I had to (using xorg) apply the changes an extra time before it was activated - Now fixed.
I've tested with the attached files squashed into pup_214R.sfs, and it seems to work.
N.b. If changing between xorg and xvesa the keyboard layout might have to be set again (list of layouts in xorg is much longer than in xvesa, also gb-uk discrepancy).
Hopefully, a few rough edges off of 214X . ...maybe...
Try it out /
MHHP
After an unusually hard week, workwise, I finally had some time so look into the keyboard setter issue.
I made some patch & stitch work, so as to utilise the working parts and hide the non-working parts .
Since I found that button 2 in the keyb. setter worked in xvesa (after a restartwm command) I replaced the non-working button 1, and button 2 with one that chooses the script from former button 2 or button 3, depending on if xorg or xvesa is running. If xorg is running, the chosen keymap code is also written to /etc/keymap, so it will be reported on the boot-screen.
Also, before, I had to (using xorg) apply the changes an extra time before it was activated - Now fixed.
I've tested with the attached files squashed into pup_214R.sfs, and it seems to work.
N.b. If changing between xorg and xvesa the keyboard layout might have to be set again (list of layouts in xorg is much longer than in xvesa, also gb-uk discrepancy).
Hopefully, a few rough edges off of 214X . ...maybe...
Try it out /
MHHP
- Attachments
-
- pup214X_keyb_setter_impr.zip
- (8.2 KiB) Downloaded 454 times
[color=green]Celeron 2.8 GHz, 1 GB, i82845, many ptns, modes 12, 13
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
- MinHundHettePerro
- Posts: 852
- Joined: Thu 05 Feb 2009, 22:22
- Location: SE
Now, I see your avatar. Is it, by any chance, a lin-lin-log-scale representation of sinc(r)sinc wrote:i'm probably the only person on here that could use it but any chance of a graphing calculator? i think there's a ti-83 or ti-84 program. if not, whatever, but i would use it.
/MHHP
[color=green]Celeron 2.8 GHz, 1 GB, i82845, many ptns, modes 12, 13
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
-
- Posts: 1198
- Joined: Tue 05 Aug 2008, 18:12
- Location: UK
sinc wrote
Well it's a long while since I studied maths at University but I think I might still have a few uses for such a thing, mr sinx/x .i'm probably the only person on here that could use it
Last edited by davesurrey on Tue 06 Oct 2009, 01:39, edited 1 time in total.