HSF/HCF softmodem dotpup packages
*** Edited ***
I've tested the following successfully
edit /etc/rc.d/rc.local and add one of the following lines depending on your modem.
hsfconfig --serial #for HSF modems
or
hcfpciconfig --serial # for HCF modems
This adds approx 18 seconds to the boot time for puppy on my AMD Athlon 650 MHz.
I'll add a facilitiy to add this option to the rc.local file in the next version of dotpups and pupgets.
I've tested the following successfully
edit /etc/rc.d/rc.local and add one of the following lines depending on your modem.
hsfconfig --serial #for HSF modems
or
hcfpciconfig --serial # for HCF modems
This adds approx 18 seconds to the boot time for puppy on my AMD Athlon 650 MHz.
I'll add a facilitiy to add this option to the rc.local file in the next version of dotpups and pupgets.
I've updated the original packages and added a dotpup to configure modem on startup for those who downloaded the previous version of the dotpups. The pupget package will be updated soon.
NB I have done limited testing of these since the changes are minor. Hopefully there shouldn't be any problems.
Changelog
Installation instructions displayed when installing dotpup and stored in /root/CNXT_INSTALL.txt for reference.
Option to setup modem on boot added to the modem setup/configuration script.
LICENSE file include in /usr/lib/hsf or /usr/lib/hcfpci depending on your modem.
minor configuration script corrections
NB I have done limited testing of these since the changes are minor. Hopefully there shouldn't be any problems.
Changelog
Installation instructions displayed when installing dotpup and stored in /root/CNXT_INSTALL.txt for reference.
Option to setup modem on boot added to the modem setup/configuration script.
LICENSE file include in /usr/lib/hsf or /usr/lib/hcfpci depending on your modem.
minor configuration script corrections
- Attachments
-
- start_modem.pup
- If you have downloaded the previous dotpups, download this file to have the modem auto config whilst booting.
- (6.16 KiB) Downloaded 876 times
Last edited by jcoder24 on Sun 06 Nov 2005, 03:23, edited 1 time in total.
SPAAAAAAAM
THIS IS SPAM, ADMIN PLEASE REMOVE
[quote][/quote]
I could not agree with you more.
[quote][/quote]
I could not agree with you more.
I had a bit of a problem with the hcf/hsf drivers. When you cat for the terms hSF and HCF in cnxtcfg, it does not pick up my conexant modem. "cat /proc/pci" gives the following on my modem...
Bus 2, device 5, function 0:
Communication controller: PCI device 14f1:1085 (Conexant) (rev 137).
IRQ 11.
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xfeaf0000 [0xfeafffff].
I/O at 0xc400 [0xc407].
As you can see, no "hcf" in the output. Once I discovered this, I changed the grep" from "HCF" to "conexant" and things went fine from there.
Other people might have the same problem with this.
Bus 2, device 5, function 0:
Communication controller: PCI device 14f1:1085 (Conexant) (rev 137).
IRQ 11.
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xfeaf0000 [0xfeafffff].
I/O at 0xc400 [0xc407].
As you can see, no "hcf" in the output. Once I discovered this, I changed the grep" from "HCF" to "conexant" and things went fine from there.
Other people might have the same problem with this.
Um, tried your last hcf driver. Pup file installed, I rebooted. Get quick glimpse of desktop and am thrown back to command line. Neither xwin nor startx will start xwindows again. However if I reboot, I again get quick glimpse of desktop.
Cant run dotpup uninstall from command line. What do I delete to stop driver from installing or whatever its doing to crash xwindows?
Cant run dotpup uninstall from command line. What do I delete to stop driver from installing or whatever its doing to crash xwindows?
Gamfa
Thanks, I'll try to see how best I can accomodate this into the drivers packages.
mouldy
Comment out the lines referred to in this post and see what happens. You can also try testing the drivers with a new pup001 file.
http://www.murga.org/~puppy/viewtopic.php?p=37949#37949
Thanks, I'll try to see how best I can accomodate this into the drivers packages.
mouldy
Comment out the lines referred to in this post and see what happens. You can also try testing the drivers with a new pup001 file.
http://www.murga.org/~puppy/viewtopic.php?p=37949#37949
Those lines dont exist and unfortunately I tried this out on a type2 install so no pup file to change. In future think I will try new stuff out on a type1 so can just play with disposable pup files. Ok though, I was going to upgrade to puppy2 when its stablized anyhow.jcoder24 wrote:
mouldy
Comment out the lines referred to in this post and see what happens. You can also try testing the drivers with a new pup001 file.
http://www.murga.org/~puppy/viewtopic.php?p=37949#37949
Conexant HSF of INSPIRON 6000
The HSF drivers are very useful for some modems but after looking through the config file I noticed that there was not an entry for my modem: Conexant D110 MDC (8086:266D). I did find more recent source that did contain an entry for the 8086:266D on the Linuxant website. However, the puppy installer does not want to accept the installation script. So I was wondering if there was a way to re-compile the dot pup to include the 8086:266D and thought I would ask you guys. I guess if make and gcc were included with the puppy distribution, I could attempt to build the modules locally.
In order to compile you need to download the user_dev.sfs file to your home folder. Reboot and you should have access to the majority of tools needed to compile.
NB The drivers I've upload were compiled in Vector Linux. I tried compiling them under puppy but got a few errors and didn't bother to troubleshoot it.
NB The drivers I've upload were compiled in Vector Linux. I tried compiling them under puppy but got a few errors and didn't bother to troubleshoot it.
Puppy 2.02 modem detection
Hello all
I am new to linux world so please advise in lay man or windows way. I have tried first DSL then Puppy on several computers. Had problems with all types of device drivers display sound modem and printer. Puppy autoconfigures display and sound so no complaints. But I could not get modem and printer to work printer HP all in one psc 1513 is not on printer list and HSF modem is not detected at all. I follow this forum to run dotpup . After telling me device ids it says restart puppy. I did that and there was a new entry in setup for HSF modem when I click it it say no hsf modem found on the system and exits. I have the HSF driver but I dont really know how to manually or auto install . Please help
I am new to linux world so please advise in lay man or windows way. I have tried first DSL then Puppy on several computers. Had problems with all types of device drivers display sound modem and printer. Puppy autoconfigures display and sound so no complaints. But I could not get modem and printer to work printer HP all in one psc 1513 is not on printer list and HSF modem is not detected at all. I follow this forum to run dotpup . After telling me device ids it says restart puppy. I did that and there was a new entry in setup for HSF modem when I click it it say no hsf modem found on the system and exits. I have the HSF driver but I dont really know how to manually or auto install . Please help
Puppy 2.02 modem detection
well
If someone has puppy 2.02 with no pci modem or usb printer support. what is it for then if you cant go to internet to download anything or print what ever you typed. its only a game machine then isnt it. I would appreciate it very much if someone can solve modem or printer problem
If someone has puppy 2.02 with no pci modem or usb printer support. what is it for then if you cant go to internet to download anything or print what ever you typed. its only a game machine then isnt it. I would appreciate it very much if someone can solve modem or printer problem
i understand your frustration, but until hsf drivers are released for 2.6 kernel, or somebody does a hack, i think your best option is to run a pup1xxx version. (depending how you've got 2.02 installed you can have both as they can coexist, then you can use pup1xxx for net).
there is a free driver for 2.6 kernel, from linuxant ( http://www.linuxant.com/company/),
but i think it's at reduced speed. my sister has a hsf winmodem on her computer, and uses pup1.08, and jcoder's dotpup, to surf net quite happily.
as to printer, i can only suggest you look at this link, regarding cups:
http://www.murga.org/%7Epuppy/viewtopic ... light=cups
there is a free driver for 2.6 kernel, from linuxant ( http://www.linuxant.com/company/),
but i think it's at reduced speed. my sister has a hsf winmodem on her computer, and uses pup1.08, and jcoder's dotpup, to surf net quite happily.
as to printer, i can only suggest you look at this link, regarding cups:
http://www.murga.org/%7Epuppy/viewtopic ... light=cups
Last edited by muggins on Thu 14 Sep 2006, 04:46, edited 1 time in total.
Thanks for help I got the driver its fine reduced speed but the problem is I dont know how to install it. When I try installing it gives a message no HSF modem found and exits. what to do is there a way to manually copy driver in some directory and restart the computer and system detects HSF modem. For your information HSF modem is working fine under windows and reported by dotpup rightly as well. how can it report it rightly while it cannot detect it for installation. I am totally confused
i think it depends which package you downloaded. i don't have a hsf modem to test this on, but suspect the best option is the package with the installer, (otherwise i think you would need the devx_202.sfs & need to ./configure, make & make install). the installer package is here:
http://www.linuxant.com/drivers/hsf/dow ... taller.php
maybe try running this. (by the way the site mentions that this is speed limited to 14.4Kbps, but that the 56K version is available for $US20)
http://www.linuxant.com/drivers/hsf/dow ... taller.php
maybe try running this. (by the way the site mentions that this is speed limited to 14.4Kbps, but that the 56K version is available for $US20)