Quirky 1.2rc feedback

Please post any bugs you have found
Post Reply
Message
Author
User avatar
munduruku
Posts: 10
Joined: Thu 27 Aug 2009, 13:25
Location: City of Porto Alegre in Brazil
Contact:

Linux and Proprietary Drivers both ends against the middle

#81 Post by munduruku »

Dear Fellow Linux,

I tested Quirky 1.1 and it worked better than former puppy versions. I could point out the things which have changed for better a thing you already know, therefore, let me, instead, point out some problems I had.
I used RipperX to convert an audio cd into mp3. I burned a data cd with the mp3 songs inside folders. When I tried to open the data cd to copy the mp3 songs, Quirky 1.1 won't allow mounting the data cd mp3, mistaking it for a raw audio cd, directly open the cd and playing it, as a result of that I had to use the excellent, though not up-to-date, german puppy minisys_083 Muppy to open the files I needed. I wonder if Quirky 1.1 could have a Xorg set
out automatically on boot, it only enters on deskto using
the otherwise excellent VESA. I feel very confortable using
VESA and have not much need for 3D acceleration, still
we cannot loose track of the latest develpments, hence
my request, would you be so kind having a look at the /var/
achieved by ARCH LINUX chakra-i686-panora-alpha5-v4.iso and check out if this confuguration could work out with Quirky 1.1?

(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.4.901, module version = 2.10.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) G33
(--) intel(0): Chipset: "G33"
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 using monitor section Monitor0
(II) intel(0): EDID vendor "AOC"

Arch Linux ( http://chakra-project.org/download.html) ,
successfully affortded automaticaly the detection of all hardaware I use. The motherboard G31VS-M failed with all other Linux Distros, Quirky including, which invariably would result:

(II) Loading /usr/lib/xorg/modules//libvbe.so

(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) VESA(0): initializing int10
(WW) VESA(0): Bad V_BIOS checksum
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 8128 kB
(II) VESA(0): VESA VBE OEM: Intel(r)Q33/Q35/G33 Graphics Chip Accelerated VGA BIOS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
(II) VESA(0): VESA VBE OEM Product: Intel(r)Q33/Q35/G33 Graphics Controller
(II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(==) VESA(0): Depth 16, (--) framebuffer bpp 16
(==) VESA(0): RGB weight 565
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level 2
(II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) VESA(0): VESA VBE DDC read successfully
(II) VESA(0): Manufacturer: AOC

Is it possible to achieve the correct XORG I need using Quirky 1.1. By what

I got from Arch Linux, my correct XORG would be:

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection

Section "Module"
Load "dbe"
Load "dri"
Load "dri2"
Load "extmod"
Load "glx"
Load "record"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "82G33/G31 Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "DRI" "true"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection

Section "DRI"
Group "video"
Mode 0666
EndSection

Just in case any of you speak Portuguese, my
native language, I usually learn about these issues
on the url:

http://www.forumdebian.com.br/viewtopic.php?f=7&t=12415

By the way, I didn't know Quirky 1.1 had the capability
to extract audio files from cd and ended up applying
RipperX instead. After I finish reporting here in the forum
I went right on to add more mp3 to the cd I was building
and, to my surprise, Quirk 1.1 didn't allow me to add extra music to the MULTISESSION CD I was about to have burned, there was a error like non-writable file, music cd cannot add files, enter a valid cd. I am a beginner, I don't know very much about how to make a file writable or not using Bash command lines, and was about to begin to believe the fault was my lack of Linux skills, before fully accepting that conclusion I had a try again with the excellent German puppy minisys_083 Muppy which after ejecting the cd distro I used to try and do the job Quirky 1.1 said was impossible, no sooner I acted pburn all files Quirky 1,1 mysteriously considered non-writable, something about permission, was added to the Multisection CD Quirky 1.1 considered mistakenly closed and after pressing burn there I had the Mp3 CD I needed. All that considered I cannot navigate on puppy minisys_083 Muppy because it is not up-to-date and didn't install the audio drivers in my Intel chipset, Quirky being the best option for Navigation and, who knows, Thanks Barry Kauler Hard Work, in the future, a very workable media station, which I already used to convert some .flv into mp3. God Bless you Barry Kauler! We all love you so much. Keep it up the superb work!
Last edited by munduruku on Fri 21 May 2010, 20:31, edited 7 times in total.
nooby
Posts: 10369
Joined: Sun 29 Jun 2008, 19:05
Location: SwedenEurope

#82 Post by nooby »

JustGreg wrote:Quirky 1.10 will be replacing Puppy 4.31 for me in a week or so. I found the nv xorg driver works better than the nvidia proprietary driver with my Acer Aspire Revo (Ion nvidia chipset) and AOC LCD (1360 by 768) . An interesting thing is the Puppy 5.0 nv driver does not work, but I have to use the Proprietary nvidia driver pet. A bit strange.

The only problem is with Mplayer. It will not play the mms stream for the "Gulch Short Wave Receiver). Gxine works on it in Puppy 4.31 but not mplayer. Mplayer connects, but no audio is heard. I have set the cache size to 32K and tried both oss (initial setting) and alsa for audio with no luck. Yes, I made sure the volume was up and not muted.

Other than Mplayer, there has been no major problems.
This one works in Q1.00 for me most likely using gxine.

http://www.scannerfood.com/

Some 55 years ago I was into this kind of things.
http://www.frn.net/vines/Forum1/HTML/004132.html
Listening to shortwave radio that is. sorry offtopic
I use Google Search on Puppy Forum
not an ideal solution though
User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

roxrightclicks

#83 Post by bigpup »

How about adding this to the next version of Quirky?

roxrightclicks

http://www.murga-linux.com/puppy/viewtopic.php?t=37410
User avatar
broomdodger
Posts: 279
Joined: Sat 10 May 2008, 02:38
Location: Santa Cruz, CA

vesa radeon works better

#84 Post by broomdodger »

quirky110 frugal
Dell Inspiron 4100 866MHz notebook

Previously reported the radeon driver:
1024x768x16 display very dark, unreadable
1024x768x24 display ok, but keyboard contrast and brightness do NOT work

Now tried the vesa driver:
1024x768x16 display ok, contrast and brightness WORK
1024x768x24 display ok, contrast and brightness WORK

VIDEO REPORT: Quirky, version 110

Chip description:
oem: ATI MOBILITY RADEON

Driver used by Xorg:
vesa

Video mode used by Xorg:
Resolution: Depth 24 Depth: "Display"
User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

#85 Post by Béèm »

I have a radeon video controller as well.
When configuring xorg, the radeon driver was configured.
You could edit the xorg.conf and replace the vesa by the radeon one.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
User avatar
broomdodger
Posts: 279
Joined: Sat 10 May 2008, 02:38
Location: Santa Cruz, CA

#86 Post by broomdodger »

Béèm wrote:I have a radeon video controller as well.
When configuring xorg, the radeon driver was configured.
You could edit the xorg.conf and replace the vesa by the radeon one.
Please explain. Do you mean only change instances of "vesa" with "radeon"?

Hmm, just tried that, did not work.

And what is the advantage?
.
User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

#87 Post by Béèm »

I didn't have to do anything special to get the radeon driver used.

Code: Select all

Section "Device"
	### Available Driver options are:-
	### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
	### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
	### [arg]: arg optional
	#Option     "NoAccel"            	# [<bool>]
	#Option     "SWcursor"           	# [<bool>]
	#Option     "Dac6Bit"            	# [<bool>]
	#Option     "Dac8Bit"            	# [<bool>]
	#Option     "BusType"            	# [<str>]
	#Option     "CPPIOMode"          	# [<bool>]
	#Option     "CPusecTimeout"      	# <i>
	#Option     "AGPMode"            	# <i>
	#Option     "AGPFastWrite"       	# [<bool>]
	#Option     "AGPSize"            	# <i>
	#Option     "GARTSize"           	# <i>
	#Option     "RingSize"           	# <i>
	#Option     "BufferSize"         	# <i>
	#Option     "EnableDepthMoves"   	# [<bool>]
	#Option     "EnablePageFlip"     	# [<bool>]
	#Option     "NoBackBuffer"       	# [<bool>]
	#Option     "DMAForXv"           	# [<bool>]
	#Option     "FBTexPercent"       	# <i>
	#Option     "DepthBits"          	# <i>
	#Option     "PCIAPERSize"        	# <i>
	#Option     "AccelDFS"           	# [<bool>]
	#Option     "DDCMode"            	# [<bool>]
	#Option     "IgnoreEDID"         	# [<bool>]
	#Option     "DisplayPriority"    	# [<str>]
	#Option     "PanelSize"          	# [<str>]
	#Option     "ForceMinDotClock"   	# <freq>
	#Option     "ColorTiling"        	# [<bool>]
	#Option     "VideoKey"           	# <i>
	#Option     "RageTheatreCrystal" 	# <i>
	#Option     "RageTheatreTunerPort" 	# <i>
	#Option     "RageTheatreCompositePort" 	# <i>
	#Option     "RageTheatreSVideoPort" 	# <i>
	#Option     "TunerType"          	# <i>
	#Option     "RageTheatreMicrocPath" 	# <str>
	#Option     "RageTheatreMicrocType" 	# <str>
	#Option     "ScalerWidth"        	# <i>
	#Option     "RenderAccel"        	# [<bool>]
	#Option     "SubPixelOrder"      	# [<str>]
	#Option     "ShowCache"          	# [<bool>]
	#Option     "DynamicClocks"      	# [<bool>]
	#Option     "VGAAccess"          	# [<bool>]
	#Option     "ReverseDDC"         	# [<bool>]
	#Option     "LVDSProbePLL"       	# [<bool>]
	#Option     "AccelMethod"        	# <str>
	#Option     "DRI"                	# [<bool>]
	#Option     "ConnectorTable"     	# <str>
	#Option     "DefaultConnectorTable" 	# [<bool>]
	#Option     "DefaultTMDSPLL"     	# [<bool>]
	#Option     "TVDACLoadDetect"    	# [<bool>]
	#Option     "ForceTVOut"         	# [<bool>]
	#Option     "TVStandard"         	# <str>
	#Option     "IgnoreLidStatus"    	# [<bool>]
	#Option     "DefaultTVDACAdj"    	# [<bool>]
	#Option     "Int10"              	# [<bool>]
	Identifier  "Card0"
	Driver      "radeon" #card0driver
	VendorName  "ATI Technologies Inc"
	BoardName   "Radeon Mobility M7 LW [Radeon Mobility 7500]"
	BusID       "PCI:1:0:0"
EndSection
In earlier releases the vesa was chosen.
But I must say I didn't notice a difference.
There is even a radeonhd driver. I tried also, but again didn't notice a difference.
Look with the puppysearch link in my sig on f.e. radeon. There are discussions about this issue and for some people it was important to have the adequate drives selected.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
Mysp
Posts: 47
Joined: Mon 08 Jun 2009, 10:39
Location: Czech Republic

Quirky 1.1 xorgwizard: strange/wrong values in setup?

#88 Post by Mysp »

Quirky 1.1 frugal. I have Asus M3A78-EM
ATI Radeon HD 3200 GPU integrated on motherboard
AMD Athlon 64 X2 4850+ processor
LCD monitor ViewSonic VG191b (19 inch, native resolution 1280 x 1024).

During setup, XORGWIZARD did following:
1. It suggested and marked 1024 x 768 as default resolution
(nothing strange, Puppy 4.x did the same, I think it just conservative).
2. It offered me also 1280 x 1024, but it wrote:
a) 16bit OK for monitor, OK for card (I tried this, too - but it is quite dark)
b) 24bit OK for monitor, may be not OK for card.
3. I choosed 1280 x 1024, 24bit (it works OK in Puppy 4.x)
and choosed "Test". It seems to work, but also writes BOTH
Horizontal refresh /Vertical refresh as 0 (ZERO)
Is it strange, wrong or can I ignore it?
4. I choosed Tweak, Tweak refresh rate and choosed
60 (instead of default/marked 56 or so).
I repeated Test and Tweak twice or three times.

Monitor seem to work OK now , but I do not know why 1280 x 1024 / 24 bit was identified as may not OK for card and and
ESPECIALLY why after choosing this, it still writes both Hor./Vert refresh as 0 (ZERO).
Should I be worried or can just ignore it? Thank you for advice and apologize my English.
User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

Re: Mplayer Difficulties

#89 Post by BarryK »

rcrsn51 wrote:
bigpup wrote: Try this;
In Mplayer select edit-Preferences
On the player tab-
make sure these settings look ok for your system. Make sure the audio setting is set for your audio setup.
on the Mplayer tab-
if enable mplayer cache is selected I would set it to 32K
In general look at all the settings in preferences for looking ok.
Changing the audio setting and cache worked for me.
Good call. Under Plugin, I set the Cache Size to 32K and now streams start almost immediately.
I have configured Gnome-mplayer with the mplayer cache disabled. Anyone got any particular thoughts on why that might be a good or bad thing?
[url]https://bkhome.org/news/[/url]
User avatar
rjbrewer
Posts: 4405
Joined: Tue 22 Jan 2008, 21:41
Location: merriam, kansas

#90 Post by rjbrewer »

gnome-mplayer

Was able to get "dvd" sound partially working when playing from
menu by selecting "en" on edit languages while the program was
running....
The sound is badly broken up and from 10 to 30 seconds out of
synch. Varies in speed.
Loud buzzing, popping noises and occasional runaway temperature climb.

Tried this dvd on 3 different machines with different sound and
video cards.
Plays flawlessly on 4.xx series puppys with ttuuxxxs vlc8.6h lite
or gxine.

Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs
User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

Re: Mplayer Difficulties

#91 Post by rcrsn51 »

BarryK wrote:I have configured Gnome-mplayer with the mplayer cache disabled. Anyone got any particular thoughts on why that might be a good or bad thing?
If I start with the mplayer cache disabled and load an audio CD, mplayer turns the cache back on. Then if the cache size is too small (32k) the playback is choppy.

For people who really want to play CD's on their computer, pCD is a better program.
User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

Re: Mplayer Difficulties

#92 Post by bigpup »

Gnome-Mplayer seems to work ok for some people and not so good for others. I have found that the cache size does effect how it operates.
BarryK wrote:
rcrsn51 wrote:
bigpup wrote: Try this;
In Mplayer select edit-Preferences
On the player tab-
make sure these settings look ok for your system. Make sure the audio setting is set for your audio setup.
on the Mplayer tab-
if enable mplayer cache is selected I would set it to 32K
In general look at all the settings in preferences for looking ok.
Changing the audio setting and cache worked for me.
Good call. Under Plugin, I set the Cache Size to 32K and now streams start almost immediately.
I have configured Gnome-mplayer with the mplayer cache disabled. Anyone got any particular thoughts on why that might be a good or bad thing?
rcrsn51 wrote:
bigpup wrote:
When playing an audio disc with Gnome-Mplayer. It plays but the CD player does not run at a constant speed. It slows down and speeds up, so the audio goes on and off.

Increase the size of your Mplayer cache.


Yes increase cache size worked but it still leaves the CD player speeding up and slowing down.
Increasing the cache size made Mplayer go back to taking a long time to start playing a audio stream from the INTERNET.
I know cache size should have an effect but Gnome- Mplayer seems to be real sensitive to the cache size.

just an idea, I wonder if their is something missing, that Gnome-Mplayer needs to work properly or if it still has bugs. There are several posts, in this thread, about problems people are having.
Web Site:
http://code.google.com/p/gnome-mplayer/
User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#93 Post by rcrsn51 »

@Béèm:

I have posted an update for the Epson scanner driver here. It is compiled for Quirky and should recognize your RX600.
User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

#94 Post by Béèm »

rcrsn51 wrote:@Béèm:

I have posted an update for the Epson scanner driver here. It is compiled for Quirky and should recognize your RX600.
Thank you.
I appreciate.
I won't have time to test tomorrow, but probably on Monday.
I'll report.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
Firewave
Posts: 21
Joined: Wed 19 May 2010, 15:54

#95 Post by Firewave »

Is there a way to configure your wireless network to use a list of networks to connect to, so you don't have to run the configuration again again and select the network you want to use?
Also...what does the "Advanced" button in the wireless configuration do? The only difference I see is, that the "New Profile" button is misplaced and the "Advanced" button changes to "Basic".
And is there a way to find out which encryption the networks you just found during scanning are using? Would be nice to show it in the list, if possible, so it won't be a try and error to configure it.
User avatar
davids45
Posts: 1326
Joined: Sun 26 Nov 2006, 23:33
Location: Chatswood, NSW

#96 Post by davids45 »

G'day,

Gnome Mplayer on its Play drop down menu lists options to watch digital or/and analogue TV. Clicking on either produces no response.

I could watch DTV on gxine in previous Pups via my hybrid card and good antenna.

How do I activate these TV options in Gnome Mplayer?

Thanks,

David S.
disciple
Posts: 6984
Joined: Sun 21 May 2006, 01:46
Location: Auckland, New Zealand

#97 Post by disciple »

Mplayer in Quirky can't play common old realaudio files like those found at one-way.org
http://one-way.org/jesusmusic/eband
These are playable in old Mplayer versions (IIRC I'm still using this one from Tempestuous), without binary Windows codecs or anything :)

This is what Mplayer in Quirky says:

Code: Select all

# mplayer *.ra
MPlayer SVN-r30341-snapshot-4.3.4 (C) 2000-2009 MPlayer Team

Playing arthurblessitt.ra.
REALAUDIO file format detected.
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
[ac3 @ 0x842fed0]frame sync error
AUDIO: 11025 Hz, 1 ch, s16le, 176.4 kbit/100.00% (ratio: 22050->22050)
Selected audio codec: [ffac3] afm: ffmpeg (FFmpeg AC-3)
==========================================================================
AO: [oss] 11025Hz 1ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A:   1.0 (01.0) of 16.1 (16.0) ??,?% 

Exiting... (End of file)
This is what a working Mplayer says:

Code: Select all

/initrd/mnt/dev_save/My Documents/Alister New/Multimedia# mplayer *.ra
MPlayer 1.0rc2-3.4.4 (C) 2000-2007 MPlayer Team
CPU: AMD Athlon(tm) processor (Family: 6, Model: 4, Stepping: 2)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
Compiled with runtime CPU detection.
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing arthurblessitt.ra.
Cache fill: 16.89% (354272 bytes)   
REALAUDIO file format detected.
==========================================================================
Opening audio decoder: [liba52] AC3 decoding with liba52
Using 3DNowEx optimized IMDCT transform
Using MMX optimized resampler
AUDIO: 11025 Hz, 2 ch, s16le, 16.0 kbit/4.54% (ratio: 2000->44100)
Selected audio codec: [a52] afm: liba52 (AC3-liba52)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A:  18.3 (18.2) of 177.1 (02:57.1)  1.6% 15% 
Exiting... (Quit)
Quirky includes liba52, but Mplayer doesn't seem to be compiled against it. I don't know if that's intentional, or a mistake, or because the Mplayer people think they can do without liba52 now...
Do you know a good gtkdialog program? Please post a link here

Classic Puppy quotes

ROOT FOREVER
GTK2 FOREVER
jpeps
Posts: 3179
Joined: Sat 31 May 2008, 19:00

#98 Post by jpeps »

Installing gxine is simple enough, and works well in quirky. There's gxine-0.5.903-patched-MU
http://murga-linux.com/puppy/viewtopic. ... 16659964d9

It needs the xine-lib-1.1.8, which can be installed from the puppy-4.0 rep in the package manager.
disciple
Posts: 6984
Joined: Sun 21 May 2006, 01:46
Location: Auckland, New Zealand

#99 Post by disciple »

Hmmm.
I just checked in my 4.1.1 install, and neither ffmpeg (Patriot's 0.5 package) nor Mplayer seems to be linked to liba52... I guess maybe it was compiled statically into one of them? Does anyone know about this?
Do you know a good gtkdialog program? Please post a link here

Classic Puppy quotes

ROOT FOREVER
GTK2 FOREVER
User avatar
davids45
Posts: 1326
Joined: Sun 26 Nov 2006, 23:33
Location: Chatswood, NSW

#100 Post by davids45 »

G'day,

Trying to play anything that has sound (mp3, movie clips) produces stuttering like sound from the file or device.
Trying the Alsa wizard, I get the double bark repeated ad infinitum (woof,woof,woof,woof,woof,woof,woof,woof,woof,woof,.. - well, until I kill it).

I just got xine to install from a pet and open my digital TV, but the sound is also a continual stammering.
Previously pet-installed xines in quirky would start to start - that is, the black video frame, a partial image of the 'control' and then just disappear. The console told me there was nothing wrong (when running xine from the console, not the menu). So at least I've now got a working combination of xine, xine-lib and xine-plug-in, but the sound is still faulty.

I recall this quirky xine and sound problem on my desktop has been in a lot of recent quirky pups - I think this is probably the first sound issue I've had, from Puppy 2.something to now. Old Pups are still perfect.

David S.

I've checked through my thirty odd Frugals and find this stuttering occurred in all Pups using the 33 kernel - all 31 kernels and lower Pups playing perfect sound. Has this computer reached its new kernel limit (I must become WARY?) or is there a sound fix available?
Last edited by davids45 on Wed 26 May 2010, 00:51, edited 1 time in total.
Post Reply