Puppeee 4.3X
this command works for streaming video asx files
Code: Select all
/usr/local/bin/defaultmediaplayer "$@"
- Attachments
-
- asx.jpg
- (29.43 KiB) Downloaded 729 times
@Jemimah,
I'm so excited whether 901 will work with puppeee rc4, but I have to wait until Friday, when I'm home and connect my runcore sd.
With first installation my current sd and usb devices were detected well
What I noticed with the latest rc's, and I think I mentioned that already, is that direct after getting the ip from dhcp the active interface icon will be "red crossed" saying: Active interfaces none ..... But I'm still connected.
The icon will stay like this until rebooting but then the same thing happens again. Sorry if I missed an earlier comment from you on this.
I'm so excited whether 901 will work with puppeee rc4, but I have to wait until Friday, when I'm home and connect my runcore sd.
With first installation my current sd and usb devices were detected well
![Very Happy :D](./images/smilies/icon_biggrin.gif)
What I noticed with the latest rc's, and I think I mentioned that already, is that direct after getting the ip from dhcp the active interface icon will be "red crossed" saying: Active interfaces none ..... But I'm still connected.
The icon will stay like this until rebooting but then the same thing happens again. Sorry if I missed an earlier comment from you on this.
cups in rc4
Jemimah,
there is something wrong or missing with cups.I upgraded cups with cups-1.3.11-i486.pet. I'm using puppeee professional and need to print to several printers. Cups 1.3.11 lets you search for and install ppd files, which the old cups in rc4 does not allow. Once you now upgrade cups, ALL your legacy programs as abi, calc, nico, geany, edit etc will not find the installed printers. The printers will be found by external programs as OO and also Thunderbird!! Can you upgrade either try to upgrade to 1.3.11 or look for this problem !? Thanks a lot. Another few releases and we have the perfect puppeee![Very Happy :D](./images/smilies/icon_biggrin.gif)
there is something wrong or missing with cups.I upgraded cups with cups-1.3.11-i486.pet. I'm using puppeee professional and need to print to several printers. Cups 1.3.11 lets you search for and install ppd files, which the old cups in rc4 does not allow. Once you now upgrade cups, ALL your legacy programs as abi, calc, nico, geany, edit etc will not find the installed printers. The printers will be found by external programs as OO and also Thunderbird!! Can you upgrade either try to upgrade to 1.3.11 or look for this problem !? Thanks a lot. Another few releases and we have the perfect puppeee
![Very Happy :D](./images/smilies/icon_biggrin.gif)
that's what I did: used gtlkp with newer cup 1.3.11, but no printers in programs.I also copied ppd files to /etc/cups/ppd, but when I install new printers that Gutenprint decompresses some ppd files but I still can't find my ppd printer.
BTW in another 8 days I follow your thread now for 1 year. You had a lot of success and it would be great if also my 901 would work by that anniversary.
BTW in another 8 days I follow your thread now for 1 year. You had a lot of success and it would be great if also my 901 would work by that anniversary.
jemimah wrote:Tom, you said you were testing on 512MB drives? And you're not moving or deleting any of the Puppeee files? What size save file are you creating?
I haven't changed the installer recently.
128MB. I haven't touched any of the files myself. When I shut down, I select ext2, default name, 128 MB size.
Tom, all the 512MB drives I had no longer work and I don't know where I can even buy new ones that small. Can you test a larger drive and see if you still have the problem. You're the only one that's complained of that so far.
Also can you test it by making the drive bootable with the BootFlash installer, then copy the files over, and don't run the bootinst.sh?
Also can you test it by making the drive bootable with the BootFlash installer, then copy the files over, and don't run the bootinst.sh?
Hokal, I was unable to reproduce the problem with usb drives on my 701SD. I booted a bunch of times with various drive plugged in and couldn't reproduce the problem, though I have seen it before in the past.
I did test the attached sysinit script and it does boot. This is the full script with none of the speed enhancements I added for Puppeee.
I did test the attached sysinit script and it does boot. This is the full script with none of the speed enhancements I added for Puppeee.
- Attachments
-
- rc.sysinit.gz
- (7.75 KiB) Downloaded 239 times
Also, Hokal, I've compiled the kernel with extra disk drivers for you. I still don't know if that's what the problem was or not, but I guess you'll find out.
http://puppeee.com/files/Drivers/vmlinu ... sk-drivers
http://puppeee.com/files/Drivers/vmlinu ... sk-drivers
jemimah wrote:Please attach the wpa_supplicant log - you can find it on the debug tab, press the Log button.
Also you could paste the contents of the window in the debug tab.
Code: Select all
Wpa_supplicant Status:
-------------------------------------------------
bssid=00:12:bf:18:ba:2f
ssid=Otherside
id=0
pairwise_cipher=TKIP
group_cipher=TKIP
key_mgmt=WPA-PSK
wpa_state=COMPLETED
-------------------------------------------------
wlan0 IEEE 802.11bg ESSID:"Otherside"
Mode:Managed Frequency:2.437 GHz Access Point: 00:12:BF:18:BA:2F
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=39/70 Signal level=-71 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
wlan0 Link encap:Ethernet HWaddr 00:15:AF:87:A0:D1
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3119 (3.0 KiB) TX bytes:1857 (1.8 KiB)
- Attachments
-
- wpa.zip
- Wpa_supplicant
- (2.72 KiB) Downloaded 178 times