Should pupdial be in the Puppy Package Manager for easy installation and config?
pupdial , depending on the puppy version can be extremely confusing to newbeings ( newbees and newbears )
I can work with it
luci-218/219/220 pupdial are different.
sdiff would show the different lines. 220-pupdial resembles more 4.3 version
You have to rmmod usb_serial or/and modprobe DRIVER at some puppys and watch out for the right nameserver entry(s) at /etc/resolv.conf
I can handle that it presents init1 while it should present init2 at the gui at first startup & probe/choose
also test button has to be applied first and if carrier wasn't detected after the first three attempts it rushes without ever connecting.
then USB modem has to be unplugged, pluggend in, test button hit and with the "spirit or manitou of success" the connect to interet button has to be hit again
HAVE FUN !
log:
Code: Select all
--> WvDial: Internet dialer version 1.53
--> Initializing modem.
--> Sending: AT+CPIN=1628
AT+CPIN=1628
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","web.vodafone.de","",0,0
AT+CGDCONT=1,"IP","web.vodafone.de","",0,0
OK
--> Sending: AT+CGDCONT=1,"IP","web.vodafone.de"
AT+CGDCONT=1,"IP","web.vodafone.de"
OK
--> Modem initialized.
--> Sending: ATX1DT*99#
--> Waiting for carrier.
ATX1DT*99#
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATX1DT*99#
--> Waiting for carrier.
ATX1DT*99#
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATX1DT*99#
--> Waiting for carrier.
ATX1DT*99#
CONNECT 7200000
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sun Aug 29 21:18:20 2010
--> pid of pppd: 21545
Welcome to PupDial, written by Barry Kauler for Puppy Linux.