4.3.2-SCSI 2.6.30.5 full older modem support
Youtube works pretty well......................once I remembered to install the darn flashplayer
- Attachments
-
- youtube.png
- (132.22 KiB) Downloaded 1653 times
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Hi Thanks to James pointing out to run the sound card wizard I know have sound, Barry has updated woof and when you update woof basically all the startup scripts get updated, The startup scripts are the same ones used in 5.1 by reading the change list. This could be a reason for the soundcards not being automatically picked-up.
scripts like
/usr/bin/xwin
/usr/sbin/delayedrun
/usr/sbin/xorgwizard
etc, etc so its bassically a needle in a haystack. find the right script and revert it back or update it.
ttuuxxx
scripts like
/usr/bin/xwin
/usr/sbin/delayedrun
/usr/sbin/xorgwizard
etc, etc so its bassically a needle in a haystack. find the right script and revert it back or update it.
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
scsijon box1
Welll... what a supprise,
Box 1 (the one that gave me all the video problems with puppy4 and 5)
frugal install, sat access via ethernet,
no problems found so far.
The video works perfectly with xorg from the start, even runs 1024x768@85hz with only a little narrowing of the screen width as it's actually running 1024x768/68.68Khz/84.89Hz.
installed without problems
packages installed no problems
sat working (and seems to be with a faster response than 5.1)
just had to put the results up
on to box 3 next (office users box)
regards
scsijon
Box 1 (the one that gave me all the video problems with puppy4 and 5)
frugal install, sat access via ethernet,
no problems found so far.
The video works perfectly with xorg from the start, even runs 1024x768@85hz with only a little narrowing of the screen width as it's actually running 1024x768/68.68Khz/84.89Hz.
installed without problems
packages installed no problems
sat working (and seems to be with a faster response than 5.1)
just had to put the results up
on to box 3 next (office users box)
regards
scsijon
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
/dev/mixer is missing, When I tried to compile a volume/mixer app I was getting gtk2 gseal errors, So I downgraded gtk2 and the gseal went away, not good. anyways If someone could focus on getting the volume to autostart/detect I could focus on building a new backend, I only have really the weekends to get this in depth and well its Sunday today.
Hmmm maybe gtk3? I haven't tried it but wouldn't mind giving it a shot.
ttuuxxx
Hmmm maybe gtk3? I haven't tried it but wouldn't mind giving it a shot.
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
scsijon's Boxes 3 & 4
Box 3
an older ati system, no web access.
no problems found with both vesa and x-org
installs ok, prints ok
Box 4
a dell optiplex gx280, never had linux only a win parn as it does my leadlighting cad. Want to put 432 and add wine131 as the package works under 131 (still have to check the drum printer will).
yuck, will have to rework this one and try to work out what's going wrong, no video would work to start with, eventually got vesa to work but only at 800x600@60hz
however found a package missing:
Grub, only get error messages saying it's missing or can't be found. even when no-x and grubconfig is called. One for you I fear ttuuxxx!
Dialup (box 2) will have to be tomorrow afternoon, but not expecting too many problems as 431 works brilliantly out off-the-cd on it as did 214ce and 214x.
regards
scsijon
an older ati system, no web access.
no problems found with both vesa and x-org
installs ok, prints ok
Box 4
a dell optiplex gx280, never had linux only a win parn as it does my leadlighting cad. Want to put 432 and add wine131 as the package works under 131 (still have to check the drum printer will).
yuck, will have to rework this one and try to work out what's going wrong, no video would work to start with, eventually got vesa to work but only at 800x600@60hz
however found a package missing:
Grub, only get error messages saying it's missing or can't be found. even when no-x and grubconfig is called. One for you I fear ttuuxxx!
Dialup (box 2) will have to be tomorrow afternoon, but not expecting too many problems as 431 works brilliantly out off-the-cd on it as did 214ce and 214x.
regards
scsijon
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Thanks scsijon looking forward to more results, I've been building a new backend for it, and well its been complicated with gtk issues with compiling but I'm getting around it
ttuuxxx
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Well I compiled the new backend, should extend the shelf-life of 4 series for a couple of years. It will take some time to put it together because I have to work mon-fri and usually pretty tired when I get home so I kind of slowdown during the week, nevertheless I'll plug away at it, If others could find fixes etc it would help to advance this version much quicker. People were asking for months for 4 series to move ahead, well this is your chance.
ttuuxxx
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
Hi ttuuxxx
Wlll try my best (even though I have the technical abilities of a wet paper bag)
tried installing the xorg_xvesa-7.3-1.pet (got it from from the pet 4 folder of woof when I was remastering 4 to try and see if I could get xvesa working better) dont think it makes any difference to xvesa
Hope this helps
Stripe
Wlll try my best (even though I have the technical abilities of a wet paper bag)
tried installing the xorg_xvesa-7.3-1.pet (got it from from the pet 4 folder of woof when I was remastering 4 to try and see if I could get xvesa working better) dont think it makes any difference to xvesa
Hope this helps
Stripe
Hi,
I booted from CD and everything works fine in my old HP L2000 laptop, I have network, sound and Xorg. Non critical errors found, only some minor errors and warnings at xerrs.log:
A small error with powerapplet:
Some errors shown with dmesg for lp module:
Not found any sound or network problem with 4.3.2. For people with issues please post your /tmp/bootsysinit.log and /tmp/bootkernel.log files.
Greetings,
clarf
I booted from CD and everything works fine in my old HP L2000 laptop, I have network, sound and Xorg. Non critical errors found, only some minor errors and warnings at xerrs.log:
They are loaded when JWM is loading the swallow applications, it's the same info that I get when start these applications from term.killall: freememapplet: no process killed
killall: powerapplet: no process killed
kill: usage: kill [-s sigspec | -n signum | -sigspec] [pid | job]... or kill -l [sigspec]
A small error with powerapplet:
Also found some errors about usb-core and usb-hid missing files, right when startx (xwin) is executed. But lsmod and dmesg show they are actually loaded, I must search the cause of this warning. (I wonder if some usb devices could have problems to load...)powerapplet: /lib/libc.so.6: version `GLIBC_2.7' not found (required by powerapplet)
Some errors shown with dmesg for lp module:
Xorg "ati" driver run but seems unstable...# lp: Unknown symbol parport_unregister_device
bash: lp:: command not found
# lp: Unknown symbol parport_unregister_driver
bash: lp:: command not found
# lp: Unknown symbol parport_negotiate
bash: lp:: command not found
# p: Unknown symbol parport_claim
bash: p:: command not found
# lp: Unknown symbol parp
Not found any sound or network problem with 4.3.2. For people with issues please post your /tmp/bootsysinit.log and /tmp/bootkernel.log files.
Greetings,
clarf
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Hi clarf nice to have you with us I appreciate you lending us a hand
Thanks for helping.
Also thanks Stripe for giving it a shot
ttuuxxx
Thanks for helping.
Also thanks Stripe for giving it a shot
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- abushcrafter
- Posts: 1418
- Joined: Fri 30 Oct 2009, 16:57
- Location: England
- Contact:
I am afraid I will be sticking to 4.3.2 V3 because the idea of not upgrading was so I not have to transfer/update all of my configuration. This was so I would get on/start my GCSES. The only reason for me to use 4.3.* in the future is if it is more compatible with hardware I will be using the most. Other wise if I am going to do all of that work I will put my effort into getting my work into Woof and switching to puppy 5. Sorry for not telling you before. I need to test the compatibility of Lupu with my computers though it should me fine. So you should assume I wont be helping you with this one .
I upgraded SeaMonkey in 4.3.2 V3 and have not noticed it being any slower in a few min test I did.
I upgraded SeaMonkey in 4.3.2 V3 and have not noticed it being any slower in a few min test I did.
[url=http://www.adobe.com/flashplatform/]adobe flash is rubbish![/url]
My Quote:"Humans are stupid, though some are clever but stupid." http://www.dependent.de/media/audio/mp3/System_Syn_Heres_to_You.zip http://www.systemsyn.com/
My Quote:"Humans are stupid, though some are clever but stupid." http://www.dependent.de/media/audio/mp3/System_Syn_Heres_to_You.zip http://www.systemsyn.com/
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
That's ok woof 4 series will take a lot less resources than woof 5 series, currently pup-432.sfs <--78MB, I don't think it will be much over 83MB when I'm done updating it, Plus it will have a much newer backend compared to 5 series. Kind of good reasons to stick with 4 seriesabushcrafter wrote:I am afraid I will be sticking to 4.3.2 V3 because the idea of not upgrading was so I not have to transfer/update all of my configuration. This was so I would get on/start my GCSES. The only reason for me to use 4.3.* in the future is if it is more compatible with hardware I will be using the most. Other wise if I am going to do all of that work I will put my effort into getting my work into Woof and switching to puppy 5. Sorry for not telling you before.
I upgraded SeaMonkey in 4.3.2 V3 and have not noticed it being any slower in a few min test I did.
I'll also update the some of devx later on.
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- abushcrafter
- Posts: 1418
- Joined: Fri 30 Oct 2009, 16:57
- Location: England
- Contact:
Now you made the decision hard .ttuuxxx wrote:That's ok woof 4 series will take a lot less resources than woof 5 series, currently pup-432.sfs <--78MB, I don't think it will be much over 83MB when I'm done updating it, Plus it will have a much newer backend compared to 5 series. Kind of good reasons to stick with 4 seriesabushcrafter wrote:I am afraid I will be sticking to 4.3.2 V3 because the idea of not upgrading was so I not have to transfer/update all of my configuration. This was so I would get on/start my GCSES. The only reason for me to use 4.3.* in the future is if it is more compatible with hardware I will be using the most. Other wise if I am going to do all of that work I will put my effort into getting my work into Woof and switching to puppy 5. Sorry for not telling you before.
I upgraded SeaMonkey in 4.3.2 V3 and have not noticed it being any slower in a few min test I did.
I'll also update the some of devx later on.
ttuuxxx
[url=http://www.adobe.com/flashplatform/]adobe flash is rubbish![/url]
My Quote:"Humans are stupid, though some are clever but stupid." http://www.dependent.de/media/audio/mp3/System_Syn_Heres_to_You.zip http://www.systemsyn.com/
My Quote:"Humans are stupid, though some are clever but stupid." http://www.dependent.de/media/audio/mp3/System_Syn_Heres_to_You.zip http://www.systemsyn.com/
My system wont display the data CDs in the CD drives
Downloaded and MD5 the ISO. Burned to CD under PUP511.
Rebooted the PC and am on desktop.
I cannot display the contents of the CD drives. (this system has 2 SATA DVD readers.)
When I click the sr0 or the sr1 icon at the bottom of the desktop, the Pmount facility launches to the desktop. When I click the Mount button, I get a RED messagebox whose text is "ERROR: unable to mount sr1".
The mount command works fine in a terminal window.
Just a note
Rebooted the PC and am on desktop.
I cannot display the contents of the CD drives. (this system has 2 SATA DVD readers.)
When I click the sr0 or the sr1 icon at the bottom of the desktop, the Pmount facility launches to the desktop. When I click the Mount button, I get a RED messagebox whose text is "ERROR: unable to mount sr1".
The mount command works fine in a terminal window.
Just a note