Want to uninstall programs in a full install *SOLVED*

Booting, installing, newbie
Post Reply
Message
Author
cjs0216
Posts: 26
Joined: Wed 10 Nov 2010, 06:04

Want to uninstall programs in a full install *SOLVED*

#1 Post by cjs0216 »

I have done some searching around on the forums and this wasn't clear to me. What I want to do is uninstall some of the software that comes with Puppy. I read about Pet-be-gone, but it seems it doesn't work with the newest version of PL. Am I wrong in this assumption? I've also read that when you do unistall, it isn't an unistall in a traditional sense, but a sort of hiding of programs you don't want. To be clear, I'm using Lucid Puppy and I've done a full install on a 6GB hdd and while I understand that these apps don't take up much space, I'm trying to conserve as much HD space as possible. I've Googled around for Puplets that might be setup the way I want, but to no avail. That and I am a do it yourself type person, and, well, I want to do it myself. Thanks in advance as I know I've been asking a lot of questions that seem to hold seemingly easy answers.
Last edited by cjs0216 on Thu 11 Nov 2010, 19:21, edited 4 times in total.
User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

#2 Post by Béèm »

Don't apologize for asking questions, that's the purpose of forums.
But give a meaningful subject to you initial post, so people know what you are looking for.

I never did this, but there are a lot of posts about this.

The function is remastering.

But I don't know if it is possible to do from a FULL install.

As far as I remember the questions were mostly from people with frugal installs.
I even think people have done it when booting only from the live CD.

So I propose you edit the subject of your initial post to something like: Want to remaster a FULL install.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
cjs0216
Posts: 26
Joined: Wed 10 Nov 2010, 06:04

#3 Post by cjs0216 »

Subject edited. Yeah I went through what seemed to be a million posts, but either I did not understand fully or they just simply didn't address how to do such a thing on a Full install. I've been reading up on woof, but it seems it's not completed, nor is it aimed at Linux beginners.
Kal
Posts: 626
Joined: Thu 05 May 2005, 16:59
Location: California, High Desert

Package Removal

#4 Post by Kal »

This pet may work for you, it does for me in Quirky full install.

http://murga-linux.com/puppy/viewtopic. ... 50&#422950
cjs0216
Posts: 26
Joined: Wed 10 Nov 2010, 06:04

#5 Post by cjs0216 »

Seems ilke it worked. I tried uninstalling gtkam and it seemed to work, though the item is still in the menu. I'll assume that it's gone because when I click it in the menu, nothing happens and whe I try to run it from the console, it says command not found. Is this normal? I don't care if I have to edit the menu, I've figured out how to do that, I guess I'm asking if that's normal.
Kal
Posts: 626
Joined: Thu 05 May 2005, 16:59
Location: California, High Desert

#6 Post by Kal »

In terminal console do a “fixmenus
Last edited by Kal on Thu 11 Nov 2010, 19:18, edited 1 time in total.
User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

#7 Post by Béèm »

Didn't know about that pet.
Well yes it seems to work, because you have a FULL install.
Apparently menu entries aren't removed automatically.
If you run fixmenus in a console and restart JWM is the entry still there?

If yes, you have to go to /usr/share/applications and find the corresponding desktop file for the removed application and do the fixmenus sequence again.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
cjs0216
Posts: 26
Joined: Wed 10 Nov 2010, 06:04

#8 Post by cjs0216 »

The fixmenu thing did the trick...thanks guys
User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

#9 Post by Béèm »

Good.
For the sake of fellow posters can you edit the subject of your initial post and add [SOLVED] at the end.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
User avatar
rjbrewer
Posts: 4405
Joined: Tue 22 Jan 2008, 21:41
Location: merriam, kansas

#10 Post by rjbrewer »

Dougals remaster script, as used in Fluppy, will also work.

The most significant hard drive space saving would be to use
ext2 instead of ext3 or ext4 partitions.

Ext2 on 6gb partition uses 106mb space;
ext3 or 4 uses 234mb.

Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs
cjs0216
Posts: 26
Joined: Wed 10 Nov 2010, 06:04

#11 Post by cjs0216 »

yeah, i'm using ext 2
User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

#12 Post by Béèm »

rjbrewer wrote:Dougals remaster script, as used in Fluppy, will also work.
You mean, also in a FULL install?
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
User avatar
rjbrewer
Posts: 4405
Joined: Tue 22 Jan 2008, 21:41
Location: merriam, kansas

#13 Post by rjbrewer »

Béèm wrote:
rjbrewer wrote:Dougals remaster script, as used in Fluppy, will also work.
You mean, also in a FULL install?
Yes;
Fluppy has 2 remaster apps.
One for cd remaster and one (based on dougals script) for
full installs.

Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs
User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

#14 Post by Béèm »

Are these scripts available for other puppy's?
In the form of a pet package?
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
User avatar
rjbrewer
Posts: 4405
Joined: Tue 22 Jan 2008, 21:41
Location: merriam, kansas

#15 Post by rjbrewer »

Béèm wrote:Are these scripts available for other puppy's?
In the form of a pet package?
Not that I'm aware of.

The remaster for full consists of 5 files; 3 of them I copied to the
same locations on a Luci install.

Don't have a Luci install right now; I'll do another and give
directions.

Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs
User avatar
duke93535
Posts: 194
Joined: Thu 05 May 2005, 16:45
Location: California , High Desert

#16 Post by duke93535 »

Unlike a frugal install, there is no need to remaster a full install to change what is there, it is changed, good or bad. There is no layering system used, so there is no initrd directory in the root of a full install.

The remastering is only needed for convenience, if you plan on transfering the full install to another machine with a live CD.

duke
User avatar
rjbrewer
Posts: 4405
Joined: Tue 22 Jan 2008, 21:41
Location: merriam, kansas

#17 Post by rjbrewer »

duke93535 wrote:Unlike a frugal install, there is no need to remaster a full install to change what is there, it is changed, good or bad. There is no layering system used, so there is no initrd directory in the root of a full install.

The remastering is only needed for convenience, if you plan on transfering the full install to another machine with a live CD.

duke
Or you can choose to just make an iso and use any storage
device to transfer.

Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs
User avatar
duke93535
Posts: 194
Joined: Thu 05 May 2005, 16:45
Location: California , High Desert

#18 Post by duke93535 »

Yes, that is true in most cases, my new machine’s bios (gigabyte) for example, will not recognize and load from usb sticks, so we have to use a live CD. My dad’s new As Rock motherboard will. I am hoping for a bios update.

duke
User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

#19 Post by Béèm »

rjbrewer wrote:
Béèm wrote:Are these scripts available for other puppy's?
In the form of a pet package?
Not that I'm aware of.

The remaster for full consists of 5 files; 3 of them I copied to the
same locations on a Luci install.

Don't have a Luci install right now; I'll do another and give
directions.
Thanks. I didn't know about those.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
Post Reply