Wary 1.0.2 (102) feedback

[Sage]

Realtek 8139/8139C/8139C+

You seem to be unaware of the discussion on these NICs, vide supra?
But you are correct - this should not have happened at this stage.

[James C]

Fresh manual frugal install of 102 on the P4 test box.Everything working on initial boot......sound,internet and correct screen resolution.
Glad this box doesn't have a Realtek 8139....
Installed Mesa...... new downloader works great.

VIDEO REPORT: Wary Puppy, version 102

Chip description:
Intel Corporation 82865G Integrated Graphics Controller

Driver used by Xorg:
intel

Video mode used by Xorg:
Resolution: Depth 24 Depth: "Display"

...the above also recorded in /tmp/report-video
#

# glxgears
3208 frames in 5.0 seconds = 641.585 FPS
3272 frames in 5.0 seconds = 654.248 FPS
3262 frames in 5.0 seconds = 652.339 FPS
3278 frames in 5.0 seconds = 655.506 FPS
3257 frames in 5.0 seconds = 651.334 FPS
2817 frames in 5.0 seconds = 563.244 FPS
10671 frames in 5.0 seconds = 2133.475 FPS
10729 frames in 5.0 seconds = 2145.748 FPS
10870 frames in 5.0 seconds = 2172.907 FPS
11053 frames in 5.0 seconds = 2210.508 FPS
10986 frames in 5.0 seconds = 2197.082 FPS

-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 512MB (236MB used)
Operating System : Puppy Linux 0.10
User Name : root (root)
Date/Time : Mon 13 Dec 2010 01:03:46 AM CST
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G 20061017 x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH4 - Intel ICH5

[DaveS]

There seems to be something not quite right with the mplayer plug-in. If i click on an mp4 file somewhere on the internet, the plug-in loads and it begins to buffer the file. Normally after around 10% buffering, the file will then play, buffereing the rest as it goes. Not in Wary. In this version, it buffers to 100% before playback begins. In previous versions of Wary, behavior was normal.

[Sage]

Glad this box doesn't have a Realtek 8139...

Whether they know it or not, there are more folks by a very large margin that do have one than have eg 3/4G modems and all the fancy kit that misguided folks want to connect to a compact distro designed specifically for older kit!
Wood for trees syndrome bites again.

[pakt]

Just bought a Huawei E1550 3G modem with a week’s worth of surftime included to test on wary-102.

Results are mixed. I get the mode switch-over notifications and that the modem is ready. I followed the setup instructions, making the choices as suggested and filled in the fields as appropriate for my carrier:

APN: net.tre.se
Phone: *99#
Username: void
Password: void
PIN: <myPIN>

Clicking on ‘connect’ I get (from pupdial.log):

Code: Select all

--> WvDial: Internet dialer version 1.53
--> Initializing modem.
--> Sending: AT+CPIN=<my_4digit_PIN>
AT+CPIN=<my_4digit_PIN>
OK
--> Sending: ATZ
ATZ
OK
--> Sending: AT+CGDCONT=1,"IP

[gerry]

My Canon i965 printer, connected via a Windows computer, using the driver from Takushi at Kyoto University, works fine. Just had to add the usual symlink named libtiff.so.4 to whatever version of libtiff is installed- libtiff.so.3.8.2 in this case.

Great! I might retire Puppy 431!

gerry

[abushcrafter]

I am finding current puppy (Not just Wary.) releases can't find the kernel in my Muiti boot LiveCDs. Previous versions worked.

[zygo]

pakt,

My Huawei E1550 (in Quirky 130) connects every time with this as init string:

Code: Select all

AT &FE0 V1 X1 &D2 &C1 S0=0

I also dial

Code: Select all

ATDT*99***1#

[James C]

Manual frugal install of Wary 102 on another old box.....500 mhz Celeron with 128 mb ram and no swap.Everything(sound,internet and display) worked on initial boot, when rebooting Wary automatically made a 200 mb swap file. Seems to be running pretty quick.


VIDEO REPORT: Wary Puppy, version 102

Chip description:
Intel Corporation 82810E DC-133 GMCH [Graphics Memory Controller Hub]
Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]

Driver used by Xorg:
intel

Video mode used by Xorg:
Resolution: Depth 24 Depth: "Display"

...the above also recorded in /tmp/report-video
#

# glxgears
226 frames in 5.2 seconds = 43.173 FPS
260 frames in 5.7 seconds = 45.960 FPS
240 frames in 5.3 seconds = 45.682 FPS
240 frames in 5.1 seconds = 46.758 FPS
240 frames in 5.4 seconds = 44.734 FPS

-Computer
Processor : Celeron (Mendocino)
Memory : 123MB (77MB used)
Operating System : Puppy Linux 0.10
User Name : root (root)
Date/Time : Mon 13 Dec 2010 10:21:16 PM CST
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa GLX Indirect
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH - Intel 82801AA-ICH


-OpenGL-
Vendor : Mesa project
Renderer : Mesa GLX Indirect
Version : 1.4 (1.5 Mesa 6.5.2)
Direct Rendering : No

-Processor-
Name : Celeron (Mendocino)
Family, model, stepping : 6, 6, 5 (Pentium II/Pentium II Xeon/Celeron)
Vendor : Intel
-Configuration-
Cache Size : 128kb
Frequency : 498.29MHz
BogoMIPS : 996.57
Byte Order : Little Endian
-Features-
FDIV Bug : no
HLT Bug : no
F00F Bug : no
Coma Bug : no
Has FPU : yes

[dalderton]

I have just installed (full install)Wary 1.0.2. I have a 3G modem E169x from virginbroadband (not) and I went through the Pupdial setup. After a couple of false starts which it ultimately resolved for itself it got to the connect stage then the dreaded message I have had from Quirky and Lupu and Wary 098 "The PPP daemon has died: A modem hung up the phone (exit code =16)" This installation has correctly found the modem etc after a couple of tries but ultimately came up with the same result.Actually it does not matter much because I have used the modem on XP and it is as slow as a wet week,I am in a good coverage area with a tower close and it is no faster than dial up. Still it would be interesting to get it to work on Puppy.
Another thing with Wary, in both 098 and 102 the PS2 mouse locks up at intervals and I have to switch off the computer direct. I have just found out that if i remove the USB mouse from the PS2 adapter and plug it in direct to the Usb then all is well other than the mouse pointer sticks momentarily from time to time. This is the only Puppy that has ever done that and I have tried most of them.
Any thoughts would be appreciated. I have notified Rerwin of this problem but had not tried 102 at that time
Regards Dennis.
Edit. The problem with the modem was an iffy USB socket. I changed to a plug in the back of the box and all was well. DUH!!!!!!!
D

[pakt]

zygo, thanks.

My Huawei E1550 (in Quirky 130) connects every time with this as init string:

Code: Select all

AT &FE0 V1 X1 &D2 &C1 S0=0

I also dial

Code: Select all

ATDT*99***1#

That init string does indeed work - I'm connected using it right now.

I recognize that init string from the log file when I ran the modem in windows.
It's interesting to see that there is no mention of 'AT+CGDCONT=1' in that log.

Note that this dial string

Code: Select all

*99#

is enough. At least it works for me (plus your init string).

Here's the pupdial.log (for Barry)

Code: Select all

--> WvDial: Internet dialer version 1.53
--> Initializing modem.
--> Sending: AT+CPIN=<myPIN>
AT+CPIN=<myPIN>
OK
--> Sending: ATZ
ATZ
OK
--> Sending: AT&FE0V1X1&D2&C1S0=0
AT&FE0V1X1&D2&C1S0=0
OK
--> Sending: AT+CGDCONT=1,"IP","net.tre.se"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
NO CARRIER
--> No Carrier!  Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
NO CARRIER
--> No Carrier!  Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
CONNECT 3600000
--> Carrier detected.  Waiting for prompt.
--> Don't know what to do!  Starting pppd and hoping for the best.
--> Starting pppd at Tue Dec 14 08:30:41 2010
--> pid of pppd: 12986

[Shep]

I also dial

Code: Select all

ATDT*99***1#

Any idea what the extra stuff is supposed to achieve over plain *99#

[zygo]

Shep,
My guess: The modem can store groups of settings. ATDT*99***1# uses the first group and *99# uses the default group. If there's only one group then it is the default.

pakt,
I might have got my string from ms xp -- I don't remember. I wonder, was the old string wired into wvdial.conf or was it the result of interrogating the modem?

Mine connects at the same speed in Puppy and ms -- 3,600,000b/s. Does yours? But the marketing says 7,200,000. Funny that it is exactly half.

Also, the carrier is detected straight away for me.

[neurino]

Master volume does not affect sound nor muting works, I can set PCM volume in Retrovol.

Sound card is an integrated one...

Master volume worked flawlessly in Wary 030 (I know, not much of help...)

Also conversation quality in Skype is the worst ever, I may guess it's Mic control unaffecting too...

Any tip?

[neurino]

I can't get my win key to work... (never had success with Wary, no problems in Puppeee)

I add lines in xorg.conf

Code: Select all

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option      "XkbRules" "xorg"
	Option      "XkbModel" "pc102"
	Option      "XkbLayout" "it" #xkeymap0
	Option      "XkbOptions" "altwin:super_win"
EndSection

and in jwmrc-personal

Code: Select all

<Key mask="P" key="D">desktop#</Key>

but the "Win-d" acts like a plain "d".

I read and tried all examples on forum, I also got Fn key combinations to work but no Win key ...

-------------------

Also about keys:

In alsamixer opened in urxvt pressing F3, F4 ecc. keys causes program to terminate and get a printed tilde ~

Thanks

[DaveS]

I can't get my win key to work... (never had success with Wary, no problems in Puppeee)

I add lines in xorg.conf

Code: Select all

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option      "XkbRules" "xorg"
	Option      "XkbModel" "pc102"
	Option      "XkbLayout" "it" #xkeymap0
	Option      "XkbOptions" "altwin:super_win"
EndSection

and in jwmrc-personal

Code: Select all

<Key mask="P" key="D">desktop#</Key>

but the "Win-d" acts like a plain "d".

I read and tried all examples on forum, I also got Fn key combinations to work but no Win key ...

-------------------

Also about keys:

In alsamixer opened in urxvt pressing F3, F4 ecc. keys causes program to terminate and get a printed tilde ~

Thanks

This is the keycode I use for the win key

Code: Select all

<Key keycode="117">exec:yourchoice</Key>

in jwmrc-personal

[neurino]

Thanks but, well I can get the keycode with xev (115 for me), but I want Win key to act as a mask for the win-d combination I'm used plus others

the win key has the advantage it's on the left and I can use it without leaving the mouse with the right one and not being used by softwares to build shortcuts

[neurino]

pburn hangs when trying to blank a cd/rw:

Code: Select all

# cdrecord -scanbus
wodim: No such file or directory. 
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.

(I guess it will not let me burn anything)

worked flawlessly in Wary 030

[scsijon]

just found I get server error on ibiblio for wary-102.iso.
checked and found it is on nluug also.
link below:
http://ftp.nluug.nl/ftp/pub/os/Linux/di ... /wary-102/
regards
scsijon
barry has been notified via his blog.

[rjbrewer]

pburn hangs when trying to blank a cd/rw:

Code: Select all

# cdrecord -scanbus
wodim: No such file or directory. 
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.

(I guess it will not let me burn anything)

worked flawlessly in Wary 030

Just tried a fast-blank of cd-rw with Pburn;
worked fine.