Yes, I read about a problem with the E1550 modem -- something about replugging -- /dev/ttyUSB0 works, but if you replug the modem then you have to use /dev/ttyUSB1 -- which is weird.pakt wrote:Well, I have definitely narrowed it down.zygo wrote:I don't know why you can't connect everytime.
After more testing, so far the init string3 only messes up when I have tried to boot with modem connected.
Then either the string is missing or the string is incorrect, e.g.Changing to the correct string, I can connect.Code: Select all
ATQ0V1E1S0=0&C1&D2+FCLASS=0
Otherwise, as long as I re-boot (with pfix=ram or with a save file), then connect the modem,
I get this initialisation string 3:orCode: Select all
ATQ0V1E1S0=0&D2
and can connect and get online.Code: Select all
ATQ0V1E1S0=0&C1&D2
(The error I get when unplugging, then re-plugging the modem without re-booting is another problem, but as this scenario is rather unlikely, I don't see fixing it so important.)
Well, I can put in some code to detect an empty string and do some workaround.