I have a FAT32 flash drive with a bunch of ISOs. I can mount them successfully just by clicking on the file's icon.Stripe wrote:the one thing I have noticed is that you cannot mount an iso stored on a usb,
How to Make a Flash Drive Install Work Like a Hard Drive
Thanks everyone and especially rcrsn51. This method worked perfectly! Only needed to do it once, which is exceptional given my personal failure track record
The only thing remaining was removing the "save" icon manually. That didn't take too long, I used the medium grit 120 sandpaper I always keep handy
I guess someone should ask Barry to consider adding this "usb/pupmode=12" install option by default? Or is it still too experimental?
The only thing remaining was removing the "save" icon manually. That didn't take too long, I used the medium grit 120 sandpaper I always keep handy
I guess someone should ask Barry to consider adding this "usb/pupmode=12" install option by default? Or is it still too experimental?
[url=http://pupsearch.weebly.com/][img]http://pupsearch.weebly.com/uploads/7/4/6/4/7464374/125791.gif[/img][/url]
[url=https://startpage.com/do/search?q=host%3Awww.murga-linux.com%2F][img]http://i.imgur.com/XJ9Tqc7.png[/img][/url]
[url=https://startpage.com/do/search?q=host%3Awww.murga-linux.com%2F][img]http://i.imgur.com/XJ9Tqc7.png[/img][/url]
Slightly off topic, but may be a good option:
I run LUPU511 from USB memory stick with lupusave on the USB.
I turned off the periodic save; save on shutdown is good enough. But, ...
I'd like to have an option to have file changes stored on the hard disk, not in RAM.
And then, upon shutdown (and using the SAVE button),
save the changes to the USB in a manner similar to multi-session DVD.
Furthermore, a utility to combine all the session saves into a single file.
I run LUPU511 from USB memory stick with lupusave on the USB.
I turned off the periodic save; save on shutdown is good enough. But, ...
I'd like to have an option to have file changes stored on the hard disk, not in RAM.
And then, upon shutdown (and using the SAVE button),
save the changes to the USB in a manner similar to multi-session DVD.
Furthermore, a utility to combine all the session saves into a single file.
Felicitations & Facilitations, Rev. John G. Derrickson
Wrote fast. Goofs happen. Tell me.
Wrote fast. Goofs happen. Tell me.
Jady we get off topic maybe.
But look here:
http://www.murga-linux.com/puppy/viewtopic.php?t=60678
and ask in that thread or make a new thread with your question.
Here is a pet that allow for choices on shut down.
PupsaveConfig the GUI
so the Dev of that one knows much about such.
But look here:
http://www.murga-linux.com/puppy/viewtopic.php?t=60678
and ask in that thread or make a new thread with your question.
Here is a pet that allow for choices on shut down.
PupsaveConfig the GUI
so the Dev of that one knows much about such.
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
Very good news. HDD that runs through spinning the disk not only whines and click them get hot too. And worse. many actually do give up after some two years of service so sometimes one wonder if it is not better to have external such spinning hdd and the internal shall be a USB flash memory and then the only fan needed would be in the CPU and the Graphic card? So if one are a low resources person one could do without any fan at all only passive cooling and a silent computing. One would only hear ones own heart and the noise of the blood flowing in the ears and the humming from earth itself
I love this thread. Promise to never take it away. I should set up such a computer one day when I get tired of the clicking on my Acer D250.
I love this thread. Promise to never take it away. I should set up such a computer one day when I get tired of the clicking on my Acer D250.
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
In some new Puppies, the default behaviour is to NOT load the sfs file into memory when booting from a hard drive. So when you convert a flash drive to PUPMODE=12, you will get the same thing.
This means that the flash drive will boot faster but may run a little slower. You can fix this by adding "pfix=copy" to your syslnux.cfg file.
The original instructions state that you must format your flash drive as ext. This is because the editinit procedure cannot be done in a FAT32 environment. However, you can copy the initrd.gz into your home directory or another ext environment and modify it there. Then copy the file back to your FAT32 flash drive. It will work fine.
This means that the flash drive will boot faster but may run a little slower. You can fix this by adding "pfix=copy" to your syslnux.cfg file.
The original instructions state that you must format your flash drive as ext. This is because the editinit procedure cannot be done in a FAT32 environment. However, you can copy the initrd.gz into your home directory or another ext environment and modify it there. Then copy the file back to your FAT32 flash drive. It will work fine.
rcrsn51 wrote:In some new Puppies, the default behaviour is to NOT load the sfs file into memory when booting from a hard drive. So when you convert a flash drive to PUPMODE=12, you will get the same thing.
This means that the flash drive will boot faster but may run a little slower. You can fix this by adding "pfix=copy" to your syslnux.cfg file.
The original instructions state that you must format your flash drive as ext. This is because the editinit procedure cannot be done in a FAT32 environment. However, you can copy the initrd.gz into your home directory or another ext environment and modify it there. Then copy the file back to your FAT32 flash drive. It will work fine.
Have it formatted to ext . Will try pfix=copy, but it seems fast anyway. (actually extlinux.conf)
Spup Frugal HD and USB
Root forever!
Root forever!
It probably doesn't make a big difference. In the case of your web browser, all the content that is stored in your profile has to be read from the pupsave file regardless of how the actual program code has been loaded. The former may have a greater impact on speed than the latter.DaveS wrote:but it seems fast anyway.
Haha.. moral of story... 'don't do this from within the Puppy you are modifying'. Booted from HD, modified initrd on USB from within a HD install, re-booted from USB, all fine. Off for a glass of wine nowrcrsn51 wrote:WFM. I created a standard PUPMODE=13 Slacko flash drive. The sound was working and I made a save file. I verified that sound was still working after a reboot, then switched to PUPMODE=12. I inserted the line after line 806. Sound still worked in the new setup.
Spup Frugal HD and USB
Root forever!
Root forever!