Polarpup-005 with Qt4-4.8.0 and Gstreamer libs inbuild
Billtoo wrote:I compiled a new vlc-1.1.10-i686.pet and I enabled some more stuff, snapshot,and some codecs.I don't know if it supports the subtitles that you want and I have no way of testing because I don't have that type of avi file.pemasu wrote:Jim3630. In my experiments Billtoos compiled VLC (in Lucid 525) and my stripping of included Qt libs is not fully succesful. Watching movies works ok for me but subtitles loading didnt work. Important for me.
Conclusion. VLC package in first page is not fully functional. Luckily my compiled Smplayer and Umplayer works fine. Support for Tano will be lost with those but you cant get everything.
Well, anyone can try that vlc sfs and give error reports but I am now sure that it does not work fully.
About compiling VLC in Polarpup. I wish luck and determination if somebody wants to do it.
I will use Smplayer and Umplayer atm.
Compiling vlc in Polarpup is a nogo, the devx is about 30mb smaller than lucid 525, in my experience anyhow.
Billtoo, thanks for the new vlc. where can download?
Had Tano working somewhat, could get channel program names with schedule times. I'm convinced tano does not stream but records and you then can play back. It says is recording but then can't find the recorded file.
After changing gtk colors saved and started Tano it crashed. This is the first time got this error so here it is.
code:
# tano
QGtkStyle was unable to detect the current GTK+ theme.
libvlc-qt "0.4.0--git" initialised
Using libvlc version: "1.1.10 The Luggage"
libvlc loaded
libvlc Media: "udp://@232.4.5.1:5002"
EPG: Flag: "nvfgpcvota2x9lecemkdpa"
ASSERT failure in QList<T>::operator[]: "index out of range", file /opt/qt4/include/QtCore/qlist.h, line 403
Aborted
After changing gtk colors saved and started Tano it crashed. This is the first time got this error so here it is.
code:
# tano
QGtkStyle was unable to detect the current GTK+ theme.
libvlc-qt "0.4.0--git" initialised
Using libvlc version: "1.1.10 The Luggage"
libvlc loaded
libvlc Media: "udp://@232.4.5.1:5002"
EPG: Flag: "nvfgpcvota2x9lecemkdpa"
ASSERT failure in QList<T>::operator[]: "index out of range", file /opt/qt4/include/QtCore/qlist.h, line 403
Aborted
"News-0.5.0 - scrolling rss news ticker
Doesn't seem to work in JWM but does in openbox.
screenshot:
http://i.imgur.com/D1ChV.jpg"
http://www.murga-linux.com/puppy/viewto ... start=1770
tried in polar pup with Icewm and works so far.
Doesn't seem to work in JWM but does in openbox.
screenshot:
http://i.imgur.com/D1ChV.jpg"
http://www.murga-linux.com/puppy/viewto ... start=1770
tried in polar pup with Icewm and works so far.
new sm tested in polar pup and works so far and is fast.
http://www.murga-linux.com/puppy/viewto ... start=1755
Seamonkey 2.1 (no dbus) -> http://distro.ibiblio.org/pub/linux/dis ... 1-i686.pet
http://www.murga-linux.com/puppy/viewto ... start=1755
Seamonkey 2.1 (no dbus) -> http://distro.ibiblio.org/pub/linux/dis ... 1-i686.pet
@pemasu
I wasn't able to get a working vlc pet compiled in polarpup but this link is to the one that I made in lucid525, it's big and I doubt that it will fix your subtitles problem but it has some extra codecs enabled and also snapshot which allows takes a screenshot of a running video (pretty nice)
http://www.datafilehost.com/download-7cbfb49e.html
I'm taking a rest from trying to compile vlc in polarpup.
I wasn't able to get a working vlc pet compiled in polarpup but this link is to the one that I made in lucid525, it's big and I doubt that it will fix your subtitles problem but it has some extra codecs enabled and also snapshot which allows takes a screenshot of a running video (pretty nice)
http://www.datafilehost.com/download-7cbfb49e.html
I'm taking a rest from trying to compile vlc in polarpup.
Billtoo. Thank you hugely of your effort. You did your best and that is enough.
I did test your latest VLC. It worked again in my brief test. Subtitles...well...they still dont work, but I still suspect that main reason is the wrong location of Qt libs regarding of compile time location.
It misses after /usr/lib/libQtCore.so but played video at short test.
I stripped it and splitted it to main, dev, doc and nls packages and uploaded them to the ftp site under Pets_Gt4
http://www.smokey01.com/pemasu/Pets_Qt4/
The main vlc-1.1.10-i686 is about 5 Mb.
The problems with subtitles. I dont know if this is part of problem:
I did test your latest VLC. It worked again in my brief test. Subtitles...well...they still dont work, but I still suspect that main reason is the wrong location of Qt libs regarding of compile time location.
It misses after /usr/lib/libQtCore.so but played video at short test.
I stripped it and splitted it to main, dev, doc and nls packages and uploaded them to the ftp site under Pets_Gt4
http://www.smokey01.com/pemasu/Pets_Qt4/
The main vlc-1.1.10-i686 is about 5 Mb.
The problems with subtitles. I dont know if this is part of problem:
But this is:Blocked: call to setlocale(6, "")
(process:4289): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
[0x830f074] subsdec decoder error: cannot convert from ISO-8859-10: No such file or directory
[0x810815c] signals interface error: signal 17 overriden (0xb6cc4130)
[0x810815c] signals interface error: /usr/lib/libQtCore.so.4(?)[(nil)]
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
[0x82e56c4] main stream error: iconv_open failed
Aborted
I think I solved how to get Qt applications to use present gtk theme. There wasnt need to install libgnomeui or gconf stuff. I had already enough of them installed. There is though need to feed one theme manually before the Qt applications starts to use gtk themes, like below command executed in console:
In attached pet is the needed fix for /root/.xinitrc and pinstall.sh which executes above command.
So install the pet and restart X to be sure. Now you should have gtk themes applied to the QT applications also.
Code: Select all
gconftool-2 --set --type string /desktop/gnome/interface/gtk_theme Polished-Blue
So install the pet and restart X to be sure. Now you should have gtk themes applied to the QT applications also.
- Attachments
-
- Qt_apps_gtk_theme_fix-0.0.1.pet
- (2.67 KiB) Downloaded 267 times
Hey pemasu, works for me!pemasu wrote:I think I solved how to get Qt applications to use present gtk theme. There wasnt need to install libgnomeui or gconf stuff. I had already enough of them installed. There is though need to feed one theme manually before the Qt applications starts to use gtk themes, like below command executed in console:In attached pet is the needed fix for /root/.xinitrc and pinstall.sh which executes above command.Code: Select all
gconftool-2 --set --type string /desktop/gnome/interface/gtk_theme Polished-Blue
So install the pet and restart X to be sure. Now you should have gtk themes applied to the QT applications also.
code:
# qtconfig
#
I retuned originally Sheepy`s posted GUI interface for xcompmgr. It creates menu entry to the Desktop section.
Xcompmgr is already installed in Polarpup.
Xcompmgr is already installed in Polarpup.
- Attachments
-
- gcompmgr-0.21.pet
- (55.75 KiB) Downloaded 308 times
Since I am not satisfied with QtWebbrowser I compiled freshly Firefox-5.0. It is still Aurora but this is the real one. Well, I am Firefox man, though I just installed Playdayz`s compiled SM2 in Ice Puppy...and almost liked it. It was sure fast enough for me. But Firefox.....
Compiled in Polarpup.
Download link: http://www.smokey01.com/pemasu/Pets/firefox-5.0.pet
And if you want nice collection of Puppy links, install attached bookmarks file. History > Show all history > Import and backup > restore > choose file your downloaded file.
Remove the phony .gz.
Compiled in Polarpup.
Download link: http://www.smokey01.com/pemasu/Pets/firefox-5.0.pet
And if you want nice collection of Puppy links, install attached bookmarks file. History > Show all history > Import and backup > restore > choose file your downloaded file.
Remove the phony .gz.
- Attachments
-
- bookmarks.json.gz
- (3.84 KiB) Downloaded 340 times
If your browser collection is not yet full, here is real perl. Small, but real fast and in quick test looks promising.
And it is little smaller than Firefox.
http://qt-apps.org/content/show.php/Web ... ent=140450
And it is little smaller than Firefox.
http://qt-apps.org/content/show.php/Web ... ent=140450
By my tests Firefox 5.0 is even faster than Seamonkey 2.1--it scores about 20% higher on the Peacekeeper benchmark (but Seamonkey 2.1 is just a shade faster than Firefox 4.0.1). It is really good IMHO to see a fast Seamonkey! QtWeb looks good, but it was jumping all over the place on me--I wasn't able to post a message, plus no right-click to copy and paste.I just installed Playdayz`s compiled SM2 in Ice Puppy...and almost liked it. It was sure fast enough for me. But Firefox.....
Playdayz. Good to hear your test reports in this thread also. About Qt browsers. I will abandon QtWebbrowser. It is not good enough, stable enough, it uses proprietary license and so you cant compile it yourself. It also drags its own static compiled libs with it. So...I have tested these light browsers actively.
Next step. Probably I have to add gstreamer support. Just compiled Clementine. But my compiling environment with all test compiles is a bit mess. Also testing wireless microcodes and compiling compat-wireless and installing them has not helped.
I maybe have to compile Clementine in fresh environment, which means dowloading tons of libs and dev libs again. Lets see.
Next step. Probably I have to add gstreamer support. Just compiled Clementine. But my compiling environment with all test compiles is a bit mess. Also testing wireless microcodes and compiling compat-wireless and installing them has not helped.
I maybe have to compile Clementine in fresh environment, which means dowloading tons of libs and dev libs again. Lets see.