Dpup Exprimo 5.X.15
Dpup Exprimo 5.X.15
Download link: http://www.smokey01.com/pemasu/DpupSque ... primo5X15/
Kernel source sfs: http://www.smokey01.com/pemasu/Kernel_s ... -2.6.39.4/
Check the md5sum. Iso size 154 Mb
First of all. This woof build is based on Iguleders work. He has single-handed done all the work for reviving dpup. I just have continued the work. All the thanks goes to Iguleder...he has awakened dpup again.
I have now Iguleder`s 2.6.39.4 kernel. So kernel modules are compatible. Shinobar has uploaded Nvidia driver packages.
Dpup Exprimo 5.X.15 has been uploaded.
- Ffmpeg-1.11
- Gnome-mplayer-1.0.7a1
- Mplayer-svn-11082012 with external ffmpeg
- JWM-574
- E17 - enlightenment recompiled using recent git trunk
- Firefox-14.01
- Streamplay TV and Radio, uses rtmpdump for streaming
- Recent woof2 used
- PupApps, Pupcontrol and PupClock has been updated to the latest. By great Radky
- Pmusic-2.6.5 with fixed Nad theme...test with wings...all dependencies included. By Zigbert
- Pburn-3.7.4
- Gnewpet-5.2. Nice way to grap installed pet from another Puppy. By Jpeps
- Psip32-1.3-Exprimo by Smokey01
- CopyDVD updated to the latest by Smokey01. You need big /mnt/home partition size for tmp creation.
- wcpufreq-0.9.1 by Tazoc/01micko ( I suppose) informed and presented by Billtoo
- Tixati torrent client in exprimo repo by 666philb
- Peazip-portable-4.4 in exprimo repo
- Opera 11.62 sfs in exprimo repo by Terryphi
- mtPaint Handbook in exprimo repo by Don570...great stuff....
- Packages-puppy-dpup-official repo is back...in smokey01.com
Download link: http://www.smokey01.com/pemasu/DpupSque ... primo5X15/
Check the md5sum. Iso size 154 Mb
Kernel source sfs: http://www.iguleder.info/puppy/kernel/l ... 6.39-4.sfs
Kernel source sfs: http://www.smokey01.com/pemasu/Kernel_s ... -2.6.39.4/
Check the md5sum. Iso size 154 Mb
First of all. This woof build is based on Iguleders work. He has single-handed done all the work for reviving dpup. I just have continued the work. All the thanks goes to Iguleder...he has awakened dpup again.
I have now Iguleder`s 2.6.39.4 kernel. So kernel modules are compatible. Shinobar has uploaded Nvidia driver packages.
Dpup Exprimo 5.X.15 has been uploaded.
- Ffmpeg-1.11
- Gnome-mplayer-1.0.7a1
- Mplayer-svn-11082012 with external ffmpeg
- JWM-574
- E17 - enlightenment recompiled using recent git trunk
- Firefox-14.01
- Streamplay TV and Radio, uses rtmpdump for streaming
- Recent woof2 used
- PupApps, Pupcontrol and PupClock has been updated to the latest. By great Radky
- Pmusic-2.6.5 with fixed Nad theme...test with wings...all dependencies included. By Zigbert
- Pburn-3.7.4
- Gnewpet-5.2. Nice way to grap installed pet from another Puppy. By Jpeps
- Psip32-1.3-Exprimo by Smokey01
- CopyDVD updated to the latest by Smokey01. You need big /mnt/home partition size for tmp creation.
- wcpufreq-0.9.1 by Tazoc/01micko ( I suppose) informed and presented by Billtoo
- Tixati torrent client in exprimo repo by 666philb
- Peazip-portable-4.4 in exprimo repo
- Opera 11.62 sfs in exprimo repo by Terryphi
- mtPaint Handbook in exprimo repo by Don570...great stuff....
- Packages-puppy-dpup-official repo is back...in smokey01.com
Download link: http://www.smokey01.com/pemasu/DpupSque ... primo5X15/
Check the md5sum. Iso size 154 Mb
Kernel source sfs: http://www.iguleder.info/puppy/kernel/l ... 6.39-4.sfs
- Attachments
-
- Dpup-Exprimo-5X15.jpg
- (24.4 KiB) Downloaded 19754 times
-
- DpupExprimo5X2.jpg
- (24.7 KiB) Downloaded 24802 times
Last edited by pemasu on Mon 13 Aug 2012, 15:44, edited 63 times in total.
Dpup Squeeze 5X or Puppy Squeeze or Experimental Squeeze Pup
Can't be downloaded because of permissions error.
Edit:The md5sum doesn't match what is in the md5txt file,will give it a try anyways
Edit:The md5sum doesn't match what is in the md5txt file,will give it a try anyways
Last edited by Billtoo on Sun 31 Jul 2011, 18:05, edited 1 time in total.
Just my first uploaded file had changed permissions. I even saw when gftp announced that the file permissions are changed. I just clicked the file upload tab and didnt do anything to change permissions.Then I forgot to check what it did. It was that main iso file. All the other files had read permissions all right.
It was the first launch of gftp in this build. And it did it again.
Well otherwise it worked ok. I would say usual gftp upload instance.
It was the first launch of gftp in this build. And it did it again.
Well otherwise it worked ok. I would say usual gftp upload instance.
This has been built with latest woof. Which utilizes pngoverlay utility. Barry Kauler has made new scripts to use pngoverlay. It means that there is now only one set of drive icons. Pngoverlay creates the frame around mounted ones and there is unmount x tab in the upper corner of the drive icon. Click it and the drive unmounts. Barry has explained all this in his blog.
Now the quirk. That process described above does not work before you have changed the icons or just changed the same set of icons. They will be loaded and then the pngoverlay works. So....launch icon swithcer. Select even same icons. There is only 3 icon sets in this build as Iguleder has wanted. And after reloading of icons....mounted drive icons get that frame and tickable x.
Now the quirk. That process described above does not work before you have changed the icons or just changed the same set of icons. They will be loaded and then the pngoverlay works. So....launch icon swithcer. Select even same icons. There is only 3 icon sets in this build as Iguleder has wanted. And after reloading of icons....mounted drive icons get that frame and tickable x.
Billtoo. Yep. I uploaded now the right md5sum. I had several builds in my sandbox3 and I uploaded the previous build md5sum.
So...the right md5sum is uploaded and it is: ba090d9fbaf81dad17fac0467004be3a
I have to say that you are so fast that I dont have time to check things. I should have made my post little later. I just dont have much time left today. So I posted it quickly after upload.
So...the right md5sum is uploaded and it is: ba090d9fbaf81dad17fac0467004be3a
I have to say that you are so fast that I dont have time to check things. I should have made my post little later. I just dont have much time left today. So I posted it quickly after upload.
...
I will try it. I thought it might work becuase the desktop-icon-switcher calls upon fixmenus, but it might also have to do with the actual recopying of the png files instead.
Edit:
Well, typing fixmenus at startup didn't fix the pngoverlay problem. I noticed that 10 extra png files were created in "/usr/local/lib/X11/pixmaps" once the icon_switcher was run. This puplet feels very snappy.
Edit:
Well, typing fixmenus at startup didn't fix the pngoverlay problem. I noticed that 10 extra png files were created in "/usr/local/lib/X11/pixmaps" once the icon_switcher was run. This puplet feels very snappy.
Last edited by Tman on Sun 31 Jul 2011, 19:38, edited 2 times in total.
Dpup Squeeze 5X or Puppy Squeeze or Experimental Squeeze Pup
Manual frugal install, devx+kernel source sfs + NVIDIA-Linux-x86-275.21.run
installed.
Sun 31 Jul 2011 Operating System: Puppy Squeeze-5.0.0 Linux 2.6.39
0.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600 GT] (rev a1)
oem: NVIDIA product: G84 Board - p402h00 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.7.7
dimensions: 1280x1024 pixels (382x302 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 8600 GT/PCI/SSE2
OpenGL version string: 3.3.0 NVIDIA 275.21
Intel(R) Core(TM)2 Quad CPU Q6600
Core 0: 1603 1: 1603 2: 1603 3: 1603 MHz
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
42354 frames in 5.0 seconds
48503 frames in 5.0 seconds
48549 frames in 5.0 seconds
Looking good.
installed.
Sun 31 Jul 2011 Operating System: Puppy Squeeze-5.0.0 Linux 2.6.39
0.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600 GT] (rev a1)
oem: NVIDIA product: G84 Board - p402h00 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.7.7
dimensions: 1280x1024 pixels (382x302 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 8600 GT/PCI/SSE2
OpenGL version string: 3.3.0 NVIDIA 275.21
Intel(R) Core(TM)2 Quad CPU Q6600
Core 0: 1603 1: 1603 2: 1603 3: 1603 MHz
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
42354 frames in 5.0 seconds
48503 frames in 5.0 seconds
48549 frames in 5.0 seconds
Looking good.
Like most Dpup and spup??? it fails to show 1024 x 768 so I had to go over to 800 x 600 to get F11 to show full screen on my Acer D250
I can confirm the icon thing But I did nothing about it. Too lazy.
SM worked well with our local tv station
I can confirm the icon thing But I did nothing about it. Too lazy.
SM worked well with our local tv station
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
Built in broadcom wl dirver works well with Frisbee settings survived reboot.
Hdd manual frugal install to ext3. added hardinfo and mesa.
Kernel : Linux 2.6.39 (i686)
Compiled : #1 SMP Fri Jul 15 19:38:53 GMT-8 2011
C Library : GNU C Library version 2.11.2 (stable)
Default C Compiler : Unknown
Distribution : Unknown distribution
-Current Session-
Computer Name : puppypc
User Name : root (root)
Home Directory : /root
Desktop Environment : Unknown (Window Manager: JWM)
-Computer-
Processor : 2x Intel(R) Pentium(R) CPU P6100 @ 2.00GHz
Memory : 2519MB (208MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Sun 31 Jul 2011 12:38:45 PM GMT+8
-Display-
Resolution : 1024x768 pixels
OpenGL-
Vendor : Mesa Project
Renderer : Software Rasterizer
Version : 2.1 Mesa 7.7.1
Direct Rendering : Yes
# glxgears
bash: glxgears: command not found
# glxgears
1954 frames in 5.0 seconds = 390.771 FPS
1958 frames in 5.0 seconds = 391.519 FPS
1961 frames in 5.0 seconds = 392.065 FPS
1956 frames in 5.0 seconds = 391.007 FPS
1953 frames in 5.0 seconds = 390.542 FPS
flysnclient works or stays off when selected through a reboot.
pppoe attempted install since heard was problematic. I do not use it but did get working once in another pup. I cannot confirm it does not work as may have incorrect settings if someone wants to confirm.
................TIMED OUT
/usr/sbin/pppoe-start: line 193: 17709 Terminated $CONNECT "$@" > /dev/null 2>&1
gparted is ver 0.7.0 will test over next days.
pemasu thanks for jwm it is so functional.
Hdd manual frugal install to ext3. added hardinfo and mesa.
Kernel : Linux 2.6.39 (i686)
Compiled : #1 SMP Fri Jul 15 19:38:53 GMT-8 2011
C Library : GNU C Library version 2.11.2 (stable)
Default C Compiler : Unknown
Distribution : Unknown distribution
-Current Session-
Computer Name : puppypc
User Name : root (root)
Home Directory : /root
Desktop Environment : Unknown (Window Manager: JWM)
-Computer-
Processor : 2x Intel(R) Pentium(R) CPU P6100 @ 2.00GHz
Memory : 2519MB (208MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Sun 31 Jul 2011 12:38:45 PM GMT+8
-Display-
Resolution : 1024x768 pixels
OpenGL-
Vendor : Mesa Project
Renderer : Software Rasterizer
Version : 2.1 Mesa 7.7.1
Direct Rendering : Yes
# glxgears
bash: glxgears: command not found
# glxgears
1954 frames in 5.0 seconds = 390.771 FPS
1958 frames in 5.0 seconds = 391.519 FPS
1961 frames in 5.0 seconds = 392.065 FPS
1956 frames in 5.0 seconds = 391.007 FPS
1953 frames in 5.0 seconds = 390.542 FPS
flysnclient works or stays off when selected through a reboot.
pppoe attempted install since heard was problematic. I do not use it but did get working once in another pup. I cannot confirm it does not work as may have incorrect settings if someone wants to confirm.
................TIMED OUT
/usr/sbin/pppoe-start: line 193: 17709 Terminated $CONNECT "$@" > /dev/null 2>&1
gparted is ver 0.7.0 will test over next days.
pemasu thanks for jwm it is so functional.
Since I left office applications out, I gave possibility to install what you need and use. I tested the Libre Office 3.4.1 sfs from the Polarpup first page link. It worked. I dont know if the fix I made is needed in dpup but it does not harm.
Iguleder has installed goffice and abiword from the squeeze repo. They need some dependencies also, but they work. Iguleder tested and posted that he couldnt find problems with squeeze repo appications.
I can post those needed dependencies if somebody wants them. You can find helpful remarks from /root/.packages/DISTRO_PKGS_SPECS file. There is clear notes what dependencies you need for abiword, goffice and gnumeric. Iguleder has done splendid job when he created his specs file. It is so clear.
But I will use anyway Libre Office. Soon they should post the next version if it is not already announced. I havent checked.
Iguleder has installed goffice and abiword from the squeeze repo. They need some dependencies also, but they work. Iguleder tested and posted that he couldnt find problems with squeeze repo appications.
I can post those needed dependencies if somebody wants them. You can find helpful remarks from /root/.packages/DISTRO_PKGS_SPECS file. There is clear notes what dependencies you need for abiword, goffice and gnumeric. Iguleder has done splendid job when he created his specs file. It is so clear.
But I will use anyway Libre Office. Soon they should post the next version if it is not already announced. I havent checked.
Dpup Squeeze 5X or Puppy Squeeze or Experimental Squeeze Pup
I added some stuff, changed to icewm too.
- Attachments
-
- dpupscrn.jpg
- (20.63 KiB) Downloaded 1935 times