Classic Pup 2.14X -- Updated 2 series
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
I've been try to get the filesharing running so here's the deps
- Attachments
-
- mpscan-curlftpfs-0.9.2-i386.pet
- (24.11 KiB) Downloaded 346 times
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
also here's pure-ftpd
- Attachments
-
- pure-ftpd-1.0.33-i386.pet
- (59.9 KiB) Downloaded 361 times
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
close but /root/File-Sharing still doesn't connect to the server when I tried it grrr, any ideas guys?
ttuuxxx
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
Top8 perfect execept fpr router lockout
.
I really love Top8 and want to use it on a few of my boxes, but in testing it I have come up against a bug that might be a showstopper for me.
I think it may be the same bug that has prevented me from being able to use any installed 214x in the past, on computers of all sorts.
In the past I have had all sorts of problems connecting to the internet with 214x.
Today I have been able to pin it down a little more:
Sometime during the bootup phase (before we get to the woof woof greeting sound), Top8 puts my router into a state where it will block any new attempt to issue a new IP address.
The effect is this: Top8 has received it's DHCP IP, and continues to access the internet ok, but only until the next boot, and at that point the router will lock it out. and not issue an IP.
Also, the router locks out ANY OTHER MACHINE that tries to request an IP through any of the wired ports. (further testing to come via the wireless side of the router - but I think that might be ok).
This behaviour persists until the router is turned off/on.
I do not have this behaviour with other versions of puppy and would love to know how Top8 is putting the router into that particular state.
This problem is totally reproducible and if anyone can suggest how to get around it I am keen to have a go.
(I'm pretty much a noob - I rely almost totally on the GUI and only approach the commandline when desperate; but I'm keen to try whatever anyone might suggest)
FURTHER TESTING - I read some posts that suggested that 214RC5 was better at networking than later 214's, but RC5 gives me the same symptom. I have now temporarily overcome this by configuring static IP. However I would still like to make DHCP reliable if anyone has any tips what I can look at or try in order to establish why Top8 puts the router in this strange state. cheers!
I really love Top8 and want to use it on a few of my boxes, but in testing it I have come up against a bug that might be a showstopper for me.
I think it may be the same bug that has prevented me from being able to use any installed 214x in the past, on computers of all sorts.
In the past I have had all sorts of problems connecting to the internet with 214x.
Today I have been able to pin it down a little more:
Sometime during the bootup phase (before we get to the woof woof greeting sound), Top8 puts my router into a state where it will block any new attempt to issue a new IP address.
The effect is this: Top8 has received it's DHCP IP, and continues to access the internet ok, but only until the next boot, and at that point the router will lock it out. and not issue an IP.
Also, the router locks out ANY OTHER MACHINE that tries to request an IP through any of the wired ports. (further testing to come via the wireless side of the router - but I think that might be ok).
This behaviour persists until the router is turned off/on.
I do not have this behaviour with other versions of puppy and would love to know how Top8 is putting the router into that particular state.
This problem is totally reproducible and if anyone can suggest how to get around it I am keen to have a go.
(I'm pretty much a noob - I rely almost totally on the GUI and only approach the commandline when desperate; but I'm keen to try whatever anyone might suggest)
FURTHER TESTING - I read some posts that suggested that 214RC5 was better at networking than later 214's, but RC5 gives me the same symptom. I have now temporarily overcome this by configuring static IP. However I would still like to make DHCP reliable if anyone has any tips what I can look at or try in order to establish why Top8 puts the router in this strange state. cheers!
Last edited by greengeek on Mon 05 Sep 2011, 09:54, edited 1 time in total.
pup 2.14X top 8.0 browser is aurora 6.2 beta????
Just did full install of top 8.0 and was surprised at the default browser???? (':o')
Aurora 6.2 on beta update channel?????
Seems to be a firefox clone.
Any idea of how to get back to firefox downloaded and set as default browser?
Pet package still has old firefox 1.5 or something?
I can grab firefox from the forum, but page 1 of this thread talks about having to hack plugins for firefox 6.0 or similar?
I have changed preferences so as "not to update".
Any suggestions?
Many thanks
Aurora 6.2 on beta update channel?????
Seems to be a firefox clone.
Any idea of how to get back to firefox downloaded and set as default browser?
Pet package still has old firefox 1.5 or something?
I can grab firefox from the forum, but page 1 of this thread talks about having to hack plugins for firefox 6.0 or similar?
I have changed preferences so as "not to update".
Any suggestions?
Many thanks
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Re: pup 2.14X top 8.0 browser is aurora 6.2 beta????
Aurora is the codename for firefox beta future versions, Aurora is Firefox 6.2 so nothing really to change at all. you could always just go to the Mozilla Firefox site and download the latest linux version and go to /lib and delete the firefox directory and extract the latest to /lib and just make sure the folder is called firefox and it will run just fine.openwell2 wrote:Just did full install of top 8.0 and was surprised at the default browser???? (':o')
Aurora 6.2 on beta update channel?????
Seems to be a firefox clone.
Any idea of how to get back to firefox downloaded and set as default browser?
Pet package still has old firefox 1.5 or something?
I can grab firefox from the forum, but page 1 of this thread talks about having to hack plugins for firefox 6.0 or similar?
I have changed preferences so as "not to update".
Any suggestions?
Many thanks
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
I downloaded Barry's compiled bluegriffon pet package for Wary and added Fireftp and a few missing deps and packaged it up, bluegriffon is a fork of Kompozer wysiwyg editor. It looks nice
here's a link http://www.smokey01.com/ttuuxxx/2.14X/S ... 0-214x.pet
If you uninstall it you might need to add
http://distro.ibiblio.org/quirky/pet_pa ... 7.5-w5.pet
because I added warys to the package and it might remove the default 2.14x sqlite.
ttuuxxx
here's a link http://www.smokey01.com/ttuuxxx/2.14X/S ... 0-214x.pet
If you uninstall it you might need to add
http://distro.ibiblio.org/quirky/pet_pa ... 7.5-w5.pet
because I added warys to the package and it might remove the default 2.14x sqlite.
ttuuxxx
- Attachments
-
- b.jpg
- (33.29 KiB) Downloaded 984 times
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
Aurora 6.02a beta is Firefox
@Ttuuxx,
who wrote: Aurora is the codename for firefox beta future versions, Aurora is Firefox 6.2 Smile so nothing really to change at all.
Many thanks,
I will stick with it then.
Good to know how to change it in the future since firefox "beta" stuff has been bad luck for me.
Don't know about anyone else.
Will cross my fingers since I must have firefox features and add-ons.
who wrote: Aurora is the codename for firefox beta future versions, Aurora is Firefox 6.2 Smile so nothing really to change at all.
Many thanks,
I will stick with it then.
Good to know how to change it in the future since firefox "beta" stuff has been bad luck for me.
Don't know about anyone else.
Will cross my fingers since I must have firefox features and add-ons.
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Re: Aurora 6.02a beta is Firefox
if you need any specific plugins to work on Aurora that haven't been updated to firefox 6, just send me a link to the package and I'll update the plugin to work on it. only about 30% are updated to firefox 6openwell2 wrote:@Ttuuxx,
who wrote: Aurora is the codename for firefox beta future versions, Aurora is Firefox 6.2 Smile so nothing really to change at all.
Many thanks,
I will stick with it then.
Good to know how to change it in the future since firefox "beta" stuff has been bad luck for me.
Don't know about anyone else.
Will cross my fingers since I must have firefox features and add-ons.
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
here's a fireworks screensaver, just install it and restart x server and wait 5 mins, I also made it disable the screensaver when gxine is running
ttuuxxx
ttuuxxx
- Attachments
-
- Gxine-xscreensaver-5.14-i386.pet
- (95.31 KiB) Downloaded 324 times
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
pet packages for 2.14X Top 8.0
@Ttuuxxx,
I am having trouble finding compatible pets that have dependencies.
Can you suggest a good repository? that includes dependencies?
I tried to install seamonkey 1.1.18 with addons like the one Barry included in Wary 5.12 .
The list of missing dependencies totalled about 50 items?
Got similar missing list when I tried the Seamonkey in the package manger of Top 8.0?
I have been using puppy for about 6 months and have tried several other puppies.
Usually, I am only missing a few libs as dependencies.
And I can search in the forum and add them without much trouble.
Just not sure which packages are compatible with Top 8.0
Many thanks for any help or suggestions.
I am having trouble finding compatible pets that have dependencies.
Can you suggest a good repository? that includes dependencies?
I tried to install seamonkey 1.1.18 with addons like the one Barry included in Wary 5.12 .
The list of missing dependencies totalled about 50 items?
Got similar missing list when I tried the Seamonkey in the package manger of Top 8.0?
I have been using puppy for about 6 months and have tried several other puppies.
Usually, I am only missing a few libs as dependencies.
And I can search in the forum and add them without much trouble.
Just not sure which packages are compatible with Top 8.0
Many thanks for any help or suggestions.
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Re: pet packages for 2.14X Top 8.0
hi have a look at http://www.smokey01.com/ttuuxxx/2.14X/Software/openwell2 wrote:@Ttuuxxx,
I am having trouble finding compatible pets that have dependencies.
Can you suggest a good repository? that includes dependencies?
I tried to install seamonkey 1.1.18 with addons like the one Barry included in Wary 5.12 .
The list of missing dependencies totalled about 50 items?
Got similar missing list when I tried the Seamonkey in the package manger of Top 8.0?
I have been using puppy for about 6 months and have tried several other puppies.
Usually, I am only missing a few libs as dependencies.
And I can search in the forum and add them without much trouble.
Just not sure which packages are compatible with Top 8.0
Many thanks for any help or suggestions.
ttuuxxx
and http://www.wisdom-seekers.com/puppy214x.html
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
pup 2.14x pets
Thank you Ttuuxxx for two great lists of pets.
And such a quick reply.
Will try them out and see how it goes!
And such a quick reply.
Will try them out and see how it goes!
- MinHundHettePerro
- Posts: 852
- Joined: Thu 05 Feb 2009, 22:22
- Location: SE
Hello, ttuuxxx !ttuuxxx on 11-08-25 wrote:hi guys I'm working on the next release, it will have a very big update , So it might take a few days.
ttuuxxx
How's it going with the update?
No rush, just a-waiting ...
Is a 214X-top9 release imminent ?
Cheers / MHHP
[color=green]Celeron 2.8 GHz, 1 GB, i82845, many ptns, modes 12, 13
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Hi hows life ?, Yes I've been working on it, kind of undecided which glib to use, I used the latest stable gtk2 and if works fine but, then I tried to compile gtk3 and it wanted an unstable glib, which needed extra new deps, I just wanted to leave the window open for gtk3, undecided, because its such a large overhaul to change the whole backend, I would hate to do it again in another few months. So I just contemplating which way to go.MinHundHettePerro wrote:Hello, ttuuxxx !ttuuxxx on 11-08-25 wrote:hi guys I'm working on the next release, it will have a very big update , So it might take a few days.
ttuuxxx
How's it going with the update?
No rush, just a-waiting ...
Is a 214X-top9 release imminent ?
Cheers / MHHP
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
anybody try the screensaver I posted on the top of this page? Should it be added to the default 2.14x iso?
Also do we want to add GTK3 to 2.14X? If so 2.14X would have gtk 1,2,3 included. GTK3 would probably add in the ballpark of 2-3MB compressed to the iso. alot of newer apps are gtk3 only.
ttuuxxx
Also do we want to add GTK3 to 2.14X? If so 2.14X would have gtk 1,2,3 included. GTK3 would probably add in the ballpark of 2-3MB compressed to the iso. alot of newer apps are gtk3 only.
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
Hi ttuuxxx,ttuuxxx wrote: Also do we want to add GTK3 to 2.14X? If so 2.14X would have gtk 1,2,3 included. GTK3 would probably add in the ballpark of 2-3MB compressed to the iso. alot of newer apps are gtk3 only.
ttuuxxx
It´s great to know you are working in a new release. How is the little girl growing? Hope everything is OK with your faimly.
In my opinion I won´t go with GTK3 on the main tree, it could add compatibility problems to all apps on 214X. Although we could add newer apps that use GTK3 then we must support those new apps, fix new errors, track any compatibility problem and fight with any GTk3 new issue found... I don´t want to change the actual stable state of 214X, it could have a huge impact.
If you really want to experiment with GTK3, what about separate the work in a new 214X branch/project not intended to be supported (like a proof of concept) and start to replace some core apps (and why stop here? you could change the WM, upgrade kernel, upgrade Xorg, add new drivers, etc). It could be a good exercise but a hell of work for sure.
Talking about kernel upgrade, MHHP how is the patch recognition process from 2.6.18.1 to 2.6.18.8 going? any news about it?.
Waiting for reply boys.
Regards,
Hi ttuuxxx,
Just tried the screensaver - works fine and is very nice. I'll keep it.
Now I have a question. Using gnumeric in top 8 for the first time. In making a chart, the little icons to to select columns or whatnot for Name, X & Y data by clicking and dragging don't work for me (hope a picture gets attached). Is this a bug or an intentional simplification? If intentional, no biggie, but obviously I do use the feature.
Continued appreciation of 214X.
Jon
Just tried the screensaver - works fine and is very nice. I'll keep it.
Now I have a question. Using gnumeric in top 8 for the first time. In making a chart, the little icons to to select columns or whatnot for Name, X & Y data by clicking and dragging don't work for me (hope a picture gets attached). Is this a bug or an intentional simplification? If intentional, no biggie, but obviously I do use the feature.
Continued appreciation of 214X.
Jon
- Attachments
-
- gnumericshot.png
- (32.31 KiB) Downloaded 1096 times
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
she's doing great 2 pic's below, she's 7 months now almost time for me to go back to work soon, maybe a couple more months. I want to make sure she's old enough before taking her to a daycare. She's a has a very funny personality and smiles almost 70% of the day, must be the happiest baby I've ever seen.clarf wrote: Hi ttuuxxx,
. How is the little girl growing? Hope everything is OK with your faimly.
ttuuxxx
- Attachments
-
- littleone2.jpg
- (16.7 KiB) Downloaded 1227 times
-
- littleone.jpg
- (17.2 KiB) Downloaded 1084 times
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)