sfs_load-2.4 on-the-fly
Re: sfs_load start
@mories
maybe i understand the problem.
Old puppies always mount the partition that has the main sfs.
Recent puppies unmount the partition if the PC has enough RAM to store the whole sfs.
The sfs_load mounts the patition as old puppies.
Ok, it will be fixed. Please wait a while.
Tnx mories.
maybe i understand the problem.
Old puppies always mount the partition that has the main sfs.
Recent puppies unmount the partition if the PC has enough RAM to store the whole sfs.
The sfs_load mounts the patition as old puppies.
Ok, it will be fixed. Please wait a while.
Tnx mories.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
sfs_load-1.2
UPDATE: sfs_load-1.2.pet. See the top of this topic.
This is a small bugfix release. You need not upgrade if you are happy with the version you are currently using.
But all the pupplet developers are encouraged to upgrade to this new version for their new release.
#26 Sep 2011 v1.2: fix was undesired mount (thanks to mories), fix was fleezed input in combobox, fix ramsize
This is a small bugfix release. You need not upgrade if you are happy with the version you are currently using.
But all the pupplet developers are encouraged to upgrade to this new version for their new release.
#26 Sep 2011 v1.2: fix was undesired mount (thanks to mories), fix was fleezed input in combobox, fix ramsize
Last edited by shinobar on Sat 29 Oct 2011, 16:07, edited 1 time in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
-
- Posts: 8
- Joined: Wed 21 Sep 2011, 01:03
Hi,
I have Lucid Puppy 5.2.8 running on a 2GB flash drive, and PUPMODE=7.
I tried to use Load-on-the-Fly for lupu_devx_528-3.sfs, but it told me that this is experimental for PUPMODE=7. I clicked OK to this message. It then gave me a fatal error (see screenshot, attached).
------------------
puppynoob101
I have Lucid Puppy 5.2.8 running on a 2GB flash drive, and PUPMODE=7.
I tried to use Load-on-the-Fly for lupu_devx_528-3.sfs, but it told me that this is experimental for PUPMODE=7. I clicked OK to this message. It then gave me a fatal error (see screenshot, attached).
------------------
puppynoob101
- Attachments
-
- image-6.png
- screenshot of fatal error
- (7.46 KiB) Downloaded 1021 times
Test release: sfs_load-1.2.9.pet
Test release: sfs_load-1.2.9.pet available. See the top post.
The first supports unionfs (Racy 5.1.110). Also expected to work on usual Puppy.
(Version 1.2 and older do not support most recent Racy 5.1.110, kernel 3.0.7 with unionfs patch. )
The first supports unionfs (Racy 5.1.110). Also expected to work on usual Puppy.
(Version 1.2 and older do not support most recent Racy 5.1.110, kernel 3.0.7 with unionfs patch. )
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
-
- Posts: 60
- Joined: Sat 22 Jan 2011, 07:50
Any body can give me a clue or a link, how run this apps at transparent background (command line) without gui? This because I love fresh frugal, and control the system with startup script.
Before, I created a startup script, and use ln or cp command. Of course this method have a lot trouble and work.
Thanks ....
Before, I created a startup script, and use ln or cp command. Of course this method have a lot trouble and work.
Thanks ....
command line
For the usage, on the terminal, type:mhanifpriatama wrote:how run this apps at transparent background (command line) without gui?
Code: Select all
sfs_load --help
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Thank you Shino
Sfs_load-1.2.9 was able to successfully load the latest Racy devx (unionfs) and libreoffice-3.4.3, an sfs I had previously constructed. (Applications tested and working).
Cheers
Sfs_load-1.2.9 was able to successfully load the latest Racy devx (unionfs) and libreoffice-3.4.3, an sfs I had previously constructed. (Applications tested and working).
Cheers
Puppy Linux Blog - contact me for access
Working for me as well, in a Puppy 4.2 derivative... Great stuff...
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]
Failure with PUPMODE=7
thanks puppynoob101 and thkn777 for the report.
I could reproduce the failure with PUPMODE=7.
Currently it does not support PUPMODE=7 (saving session in entire partition on a flash device).
Use the bootmanager to load sfs.
But i recommend to make a fresh install and save your session in a file to make PUPMODE=13, not to the entire partition.
EDIT: sfs_load v.1.3 supports PUPMODE=7, but i still recommend saving your session in a file(so that the PUPMODE=13), not to the partition.
I could reproduce the failure with PUPMODE=7.
Currently it does not support PUPMODE=7 (saving session in entire partition on a flash device).
Use the bootmanager to load sfs.
But i recommend to make a fresh install and save your session in a file to make PUPMODE=13, not to the entire partition.
EDIT: sfs_load v.1.3 supports PUPMODE=7, but i still recommend saving your session in a file(so that the PUPMODE=13), not to the partition.
Last edited by shinobar on Thu 17 Nov 2011, 14:33, edited 1 time in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Russian translation
I have updated Russian translation for sfs_load.
- Attachments
-
- ru.po.gz
- (5.09 KiB) Downloaded 496 times
UPDATE: sfs_load-1.3
13 Nov 2011 v1.3: fix could not unload excess sfs(>6) with some version of busybox, PUPMODE=7(same as PUPMODE=2), error message at unload failure
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
added to wiki
http://puppylinux.org/wikka/SFSLoad
also have you seen, SFSdirloader, seems like SFSLoad has a similar function?
http://www.murga-linux.com/puppy/viewtopic.php?t=44601/
http://puppylinux.org/wikka/SFSLoad
also have you seen, SFSdirloader, seems like SFSLoad has a similar function?
http://www.murga-linux.com/puppy/viewtopic.php?t=44601/
Yes but as I remember????? SFSdirloader does not work on all puppies.
I had to do very time consuming manual editing for it to work on my lupu513 that actually are a Snow Puppy 5. And I have forgotten how
to do it again if I would need to add anything.
So I would instead recomment either Shinobar's load on the fly
or Seaside's SFS-Exec which is more manual but that one can fail too
and it has no error checking. One can load same file twice and it would
not complain about it. One have to keep track of what one have loaded
and not using pencil or pen or memory or write it on some notes digitally
I had to do very time consuming manual editing for it to work on my lupu513 that actually are a Snow Puppy 5. And I have forgotten how
to do it again if I would need to add anything.
So I would instead recomment either Shinobar's load on the fly
or Seaside's SFS-Exec which is more manual but that one can fail too
and it has no error checking. One can load same file twice and it would
not complain about it. One have to keep track of what one have loaded
and not using pencil or pen or memory or write it on some notes digitally
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
seems like sfsdirloader isn't reliable, have you had good experience with SFSLoad?
may take SFSdirloader off wiki filesystem page here-
http://puppylinux.org/wikka/SoftwareFilesystem
may take SFSdirloader off wiki filesystem page here-
http://puppylinux.org/wikka/SoftwareFilesystem
To be fair to Seaside he does tell under what circumstancesseems like sfsdirloader isn't reliable
it does work reliably. His set up at home. So if the one I use
differ then he had no way of testing this at his home
So it is a bit of a lottery or know how but it is reliable at his place
Nope have only tested these and not the one you mention most likely
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
There is a problem with the way some SFSs are packaged
SFS-jre-1.7.0.01-20111027.sfs
and
google-earth_6.2.2074.sfs
see thread:-
http://www.murga-linux.com/puppy/viewto ... 949#586949
The permission setting breaks CUPS, is there a way SFS Load could detect and even work around this problem?
SFS-jre-1.7.0.01-20111027.sfs
and
google-earth_6.2.2074.sfs
see thread:-
http://www.murga-linux.com/puppy/viewto ... 949#586949
The permission setting breaks CUPS, is there a way SFS Load could detect and even work around this problem?
SFS permission
Tnx darkcity for the report. But maybe nothing the SFS_load can do for this.darkcity wrote:see thread:-
http://www.murga-linux.com/puppy/viewto ... 949#586949
The permission setting breaks CUPS, is there a way SFS Load could detect and even work around this problem?
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]