Slacko 5.3.3-RC2 (5.3.2.4[0])
Chromium / Iron on 5.3.1.3
Hi Mick
Just a quick note that on slacko5.3.1.3:
chromium-18.0.996.0-slacko.pet segfaults
iron-16.0.950.0-slacko.pet doesn't - runs OK
from the pet_packages-slacko repository
Cheers
peebee
Just a quick note that on slacko5.3.1.3:
chromium-18.0.996.0-slacko.pet segfaults
iron-16.0.950.0-slacko.pet doesn't - runs OK
from the pet_packages-slacko repository
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Re: The return of b43 detection in k3 puppies
Hmm - did that and had a look at the advice therein, and now I'm thinking if I want to use a Puppy on this HP Mini it would be easier to buy a USB wireless stick.mavrothal wrote: If you run "dmesg | grep b43" in the terminal you may see why.
Most likely does not have the proper firmware for your chip.
woops!
Last edited by 01micko on Wed 25 Jan 2012, 13:27, edited 1 time in total.
Puppy Linux Blog - contact me for access
Slacko 5.3.3-alpha4 ..testing (5.3.1.4)
Slacko 5.3.1.4 didn't see wlan0 on this laptop but I loaded the b43
module in network manager and setup the wireless connection, it's
working fine.
Network controller Broadcom Corporation BCM4312 802.11b/g LP-PHY
module in network manager and setup the wireless connection, it's
working fine.
Network controller Broadcom Corporation BCM4312 802.11b/g LP-PHY
@Billtoo, there is a crucial mistake, reuploaded
Sorry aarf, your deltas are useless for b43 users (subsequent deltas from your copy of 5.3.1.4 will be useless too)
If you use b43 (broadcom wireless) please get the iso from the main post
Sorry aarf, your deltas are useless for b43 users (subsequent deltas from your copy of 5.3.1.4 will be useless too)
If you use b43 (broadcom wireless) please get the iso from the main post
Puppy Linux Blog - contact me for access
new untested deltas at discretion. (unexplained failure has occurred with deltas for one saluki.iso)
(21M)
or (38M)
The md5sum of new slacko-5.3.1.4-SCSI.iso is 724e3a9e20582276ab3ec74cb519547f
Code: Select all
wget -4c --http-user=puppy --http-password=linux http://www.smokey01.com/aarf/xdelta/slacko-5.3.1.3-SCSI.iso___slacko-5.3.1.4-SCSI.iso.delta
or
Code: Select all
wget -4c --http-user=puppy --http-password=linux http://www.smokey01.com/aarf/xdelta/slacko-5.3.1.2-SCSI.iso___slacko-5.3.1.4-SCSI.iso.delta
The md5sum of new slacko-5.3.1.4-SCSI.iso is 724e3a9e20582276ab3ec74cb519547f
Last edited by aarf on Wed 25 Jan 2012, 14:50, edited 2 times in total.
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Slacko 5.3.3-alpha4 ..testing (5.3.1.4)
downloaded in 89s
Slacko 5.3.3-alpha4 ..testing (5.3.1.4)
I'm running from the live dvd with a save file.
Nvidia driver compiled okay after extra reboot.
Wed 25 Jan 2012 Operating System:Slacko Puppy-5.3.1.4 Linux 3.2.1-slacko_4gx2
0.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200] (rev a2)
0.0 VGA compatible controller: nVidia Corporation G98 [GeForce9300GE] (rev a1)
oem: NVIDIA product: MCP77 Board - mcp78pvo Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.9.5
dimensions: 1440x900 pixels (373x231 millimeters)
depth of root window: 24 planes
Athlon(tm) Dual Core Processor 4850e
Core 0: 1000 1: 1000 MHz
CPU frequency scaling utilty works.
Will test more later.
EDIT: I did a little personal preference customizing.
I installed the mesa pets (goggles needs libglu or something) and
glxgears works.
I tested some of the applications and no problems yet.
I like this release, it's working good so far.
# glxgears
7030 frames in 5.0 seconds = 1405.902 FPS
6987 frames in 5.0 seconds = 1397.370 FPS
7041 frames in 5.0 seconds = 1408.130 FPS
#
I'm sure you'll do well at college, become wealthy, live happily ever after
Nvidia driver compiled okay after extra reboot.
Wed 25 Jan 2012 Operating System:Slacko Puppy-5.3.1.4 Linux 3.2.1-slacko_4gx2
0.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200] (rev a2)
0.0 VGA compatible controller: nVidia Corporation G98 [GeForce9300GE] (rev a1)
oem: NVIDIA product: MCP77 Board - mcp78pvo Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.9.5
dimensions: 1440x900 pixels (373x231 millimeters)
depth of root window: 24 planes
Athlon(tm) Dual Core Processor 4850e
Core 0: 1000 1: 1000 MHz
CPU frequency scaling utilty works.
Will test more later.
EDIT: I did a little personal preference customizing.
I installed the mesa pets (goggles needs libglu or something) and
glxgears works.
I tested some of the applications and no problems yet.
I like this release, it's working good so far.
# glxgears
7030 frames in 5.0 seconds = 1405.902 FPS
6987 frames in 5.0 seconds = 1397.370 FPS
7041 frames in 5.0 seconds = 1408.130 FPS
#
I'm sure you'll do well at college, become wealthy, live happily ever after
- Attachments
-
- scrnshot.jpg
- (100.37 KiB) Downloaded 574 times
Last edited by Billtoo on Wed 25 Jan 2012, 17:50, edited 1 time in total.
Hoorah
Hi Mick
Pristine, manual, frugal install to my HP550 with B43 wifi..
B43 recognized and successful connection achieved with Frisbee.
Snapshot attached.
Will now try to update my 5.3.1.3 savefile.
Thanks
peebee
Pristine, manual, frugal install to my HP550 with B43 wifi..
B43 recognized and successful connection achieved with Frisbee.
Snapshot attached.
Will now try to update my 5.3.1.3 savefile.
Thanks
peebee
- Attachments
-
- success.png
- (26.71 KiB) Downloaded 655 times
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Hi Mick,
Manual installation on a ext4 partition on my desktop boots to a desktop fine, however alpha 4 does not recognize my wireless mouse. Laptop has same type of Logitech mouse which all previous versions have recognized. I've reverted back to Alpha 3 which works fine on both my desktop and laptop, both of which have i7 processors.
Regards,
Jim
Manual installation on a ext4 partition on my desktop boots to a desktop fine, however alpha 4 does not recognize my wireless mouse. Laptop has same type of Logitech mouse which all previous versions have recognized. I've reverted back to Alpha 3 which works fine on both my desktop and laptop, both of which have i7 processors.
Regards,
Jim
5.3.3.4
Burned & saved to live CD.
So far everything is working well and... the 'SAVE' icon is staying on the desktop like it should... last version it disappeared after the first shutdown and went into automatic savefile gear on shutdown.
It's good to see many updated programs in this version!
Nice work Mic!!!!
>>>---Indian------>
So far everything is working well and... the 'SAVE' icon is staying on the desktop like it should... last version it disappeared after the first shutdown and went into automatic savefile gear on shutdown.
It's good to see many updated programs in this version!
Nice work Mic!!!!
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
5.3.3.-alpha4
Created live cd using delta file
booted to desktop, sound ok, auto connect to internet ok
Did full install to ext4 partition
Updated seamonkey to 2.7b4
added audacious 3.02Lucid529
plus many other applications from my storage partation
Everything working - Very fast bootup. 35 seconds on Hp pent4 with 2gb mem
I know many, many hours have gone into the producing this and I thank you for all the hard work.
Excellent product
majorfoo
booted to desktop, sound ok, auto connect to internet ok
Did full install to ext4 partition
Updated seamonkey to 2.7b4
added audacious 3.02Lucid529
plus many other applications from my storage partation
Everything working - Very fast bootup. 35 seconds on Hp pent4 with 2gb mem
I know many, many hours have gone into the producing this and I thank you for all the hard work.
Excellent product
majorfoo
- Attachments
-
- slacko-5.3.1.4.png
- (65.47 KiB) Downloaded 735 times
Touchpad
Hi.
Probably i am doing something wrong,but how to enable tapping with my touchpad ?
I can only move my cursor,but to execute i have to right click.
Configuring my touchpad didn't do anything.
My laptop is DELL latitude c610.
I don't have that problem with LUPQ-511 and Lucid Puppy.
Thanks in advance.
Probably i am doing something wrong,but how to enable tapping with my touchpad ?
I can only move my cursor,but to execute i have to right click.
Configuring my touchpad didn't do anything.
My laptop is DELL latitude c610.
I don't have that problem with LUPQ-511 and Lucid Puppy.
Thanks in advance.
Slacko 5.3.1.4 live pfix=ram. Boots on Athlon XP. Everything working on initial boot.
# report-video
VIDEO REPORT: Slacko Puppy, version 5.3.1.4
Chip description:
oem: NVidia
product: NV18 () Board Chip Rev A2
Driver used by Xorg:
nouveau
Video mode used by Xorg:
Resolution: "1440x900" Depth: Depth 24
...the above also recorded in /tmp/report-video
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (159MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Wed 25 Jan 2012 02:04:42 PM CST
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235
-Version-
Kernel : Linux 3.2.1-slacko_4gx2 (i686)
Compiled : #1 SMP Wed Jan 25 08:01:15 EST 2012
C Library : GNU C Library version 2.13 (stable)
Default C Compiler : Unknown
Distribution : Unknown distribution
# free
total used free shared buffers
Mem: 1033976 435264 598712 0 49808
-/+ buffers: 385456 648520
Swap: 1228936 0 1228936
# report-video
VIDEO REPORT: Slacko Puppy, version 5.3.1.4
Chip description:
oem: NVidia
product: NV18 () Board Chip Rev A2
Driver used by Xorg:
nouveau
Video mode used by Xorg:
Resolution: "1440x900" Depth: Depth 24
...the above also recorded in /tmp/report-video
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (159MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Wed 25 Jan 2012 02:04:42 PM CST
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235
-Version-
Kernel : Linux 3.2.1-slacko_4gx2 (i686)
Compiled : #1 SMP Wed Jan 25 08:01:15 EST 2012
C Library : GNU C Library version 2.13 (stable)
Default C Compiler : Unknown
Distribution : Unknown distribution
# free
total used free shared buffers
Mem: 1033976 435264 598712 0 49808
-/+ buffers: 385456 648520
Swap: 1228936 0 1228936
Wobbly Boot in Slacko 5.3.1.4, yayyyy!!
Thanks for this one Mick....i was about to d/l 5.3.1.3 when it suddenly morphed into 5.3.1.4 in front of my very eyes
Very snappy on this modest 1.8GHz T42P, i like it very much.
I'm pleased to report that compiz is working a treat now, but initially i was experiencing the same issue as rhadon in this post, regarding the 2nd image and the "Software Rasteriser in use" error.
After entering the code you suggested, for turning on kernel modesetting, i rebooted, dropped to the prompt and fired up the dummy with roaring success
CatDude's patient assistance with aspects of this voyage of discovery is very much appreciated, too..
Very snappy on this modest 1.8GHz T42P, i like it very much.
I'm pleased to report that compiz is working a treat now, but initially i was experiencing the same issue as rhadon in this post, regarding the 2nd image and the "Software Rasteriser in use" error.
After entering the code you suggested, for turning on kernel modesetting, i rebooted, dropped to the prompt and fired up the dummy with roaring success
CatDude's patient assistance with aspects of this voyage of discovery is very much appreciated, too..
- Attachments
-
- slacko5314-T42P-hardinfo.tar.gz
- Laptop specs for anyone who might find them useful
- (2.25 KiB) Downloaded 197 times
[i][color=Green][size=92]The mud-elephant, wading thru the sea, leaves no tracks..[/size][/color][/i]
Yespemasu wrote:01micko. Have you or do you intend to upload puppy patches for the 3.2.1 kernel. Aufs patches I should get from aufs site ?
It would save a lot work if you have patches to offer
I am going one better and posting the fully automated build kit based on Iguleder's work. The big change though is that when it's time to swap over the DOTconfig to the kernel source the script pauses and offers to open a config tool of your choice to configure the kernel. Also, the slacko suffixes (custom and package_name) are hard coded so you need to change that unless you want ta slacko branded dpup kernel! You should not need to do anything manually, just run dir2pet. I can automate this too.. later maybe.
There is also a bug in 3builddistro in woof, I have a nasty hack for now but I'll explain the gist of it.
@ line 215 I had to change head to tail. This is because I have a custom naming. "head" or "tail" is wrong really and what should happen is that the symlink be read with readlink, but it was getting late and as usual I was running out of time . If you don't do this you can end up with a non-booting iso image. You can see the error pop up if you look close when the kernel is merged with the rootfs. I'll patch it properly later and report to Barry.
Have fun!
- Attachments
-
- kernel_kit-3.2.1.tar.gz
- (30.6 KiB) Downloaded 202 times
Puppy Linux Blog - contact me for access