Wary/Racy 5.3RC2 (5.2.91)
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: Wary5.2.2.7
Fixed:L18L wrote:Sorry, there is just openofficeBarryK wrote:...
Note, the desktop 'install' icon has a choice to install SFS files, and I have added 'poedit' -- ...
http://bkhome.org/blog/?viewDetailed=02715
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: Racy5.2.2.7
No problem, retrovol is now managed by MoManager, you need to get retrovol.pot from here:L18L wrote:Installed latest retrovol-0.12.pet fromBarryK wrote:... MoManager, a brand new one-stop-shop for creating a langpack PET...
http://murga-linux.com/puppy/viewtopic.php?t=50744
which has included French (thanks to Argolance ) and German mo files.
In momanager there is no chance to edit or include it into langpack.
retrovol is a binary executable.
jwm is also a binary executable but it is handled by momanager.
_______________________-
Edited
This not meant as anything in the direction of a bug report
Just my observation.
Maybe it is a good solution to NOT offer everything for translation
http://bkhome.org/fossil/woof2.cgi/info/03d04c2cc3
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: Racy5.2.2.7
However, does the font only need to be reloaded when the locale has been changed?L18L wrote:Thanks to rodin.s we have also xwin internationalized.
Really very important messages!
Returning from X the first character in console is displaying just as 1 question mark.After some trials I have found the solution:in xwin line 547 rodin.s wrote:#unicode_start #i18n rodin.s for unicode start after exit from X. ??????what is this??????
font has to be set again
Tested succesfully (just for 1 font ) by inserting
xwin line 548:___________________________________________________________Code: Select all
zcat /lib/consolefonts/LatGrkCyr-8x16.psfu.gz | loadfont # !!! a solution
Does itsc0ttman wrote:Maybe because retrovol uses /usr/local/share .... ?
At first boot, locale will be en_US, then you use QuickSetup to change the locale. Then, when you exit from X, the correct font will not be loaded.
However, after having created a save-file, after reboot, the correct console font will be loaded, so at exit from X, it should not need reloading?
Based on the above reasoning, I have modified xwin.
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: Racy5.2.2.7
I have modified quicksetup to load correct console font if locale is changed. So, xwin should not need any change.BarryK wrote:However, does the font only need to be reloaded when the locale has been changed?L18L wrote:Thanks to rodin.s we have also xwin internationalized.
Really very important messages!
Returning from X the first character in console is displaying just as 1 question mark.After some trials I have found the solution:in xwin line 547 rodin.s wrote:#unicode_start #i18n rodin.s for unicode start after exit from X. ??????what is this??????
font has to be set again
Tested succesfully (just for 1 font ) by inserting
xwin line 548:___________________________________________________________Code: Select all
zcat /lib/consolefonts/LatGrkCyr-8x16.psfu.gz | loadfont # !!! a solution
Does itsc0ttman wrote:Maybe because retrovol uses /usr/local/share .... ?
At first boot, locale will be en_US, then you use QuickSetup to change the locale. Then, when you exit from X, the correct font will not be loaded.
However, after having created a save-file, after reboot, the correct console font will be loaded, so at exit from X, it should not need reloading?
Based on the above reasoning, I have modified xwin.
Will upload Woof soon.
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
I just did a test. Running 5.2.2.7, I changed to de_DE, then edited /etc/DISTRO_SPECS and changed the version back to 5.2.2.6, then rebooted.mave wrote:This Racy with internationalization changes seems to be great - thanks Barry!
Did updates from 5.2.2.6 to 5.2.2.3 on three machines. Every time german localization of desktop-icons falled back to english (menu entries okay).
Can't see why...
mave
After reboot, desktop icons are still 'de'.
Well, 5.2.2.6 and 5.2.2.3 are alpha releases, there must have been something odd in them that upset the version upgrade of the save-file.
Oh yes, there was, the SSS translation method changed.
Now that the SSS stuff has settled down, upgrading of save-file should be ok.
[url]https://bkhome.org/news/[/url]
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Re: Racy5.2.2.7
I have got the retrovol.pot nowBarryK wrote:...
No problem, retrovol is now managed by MoManager, you need to get retrovol.pot from here:
http://bkhome.org/fossil/woof2.cgi/info/03d04c2cc3
translation is offered in momanager now
but geany has opened an empty /tmp/retrovol.po
Or is there a momanager newer than mine? : #1202120 need ..# ls -l /usr/share/locale/de/LC_MESSAGES/retrovol.mo
-rw-r--r-- 1 root root 6514 2012-02-22 20:48 /usr/share/locale/de/LC_MESSAGES/retrovol.mo
#
Wary/Racy 5.3beta1 (5.2.2.7)
I compiled and made a sfs file of vlc-2.0.0.
I tested it in the new racy-5.2.2.7 beta on a pc with a nvidia
graphics card and a netbook with ati hd4200 graphics.
The pc with the nvidia card needed at least the nouveau driver
installed, it works fine with the proprietary nvidia driver too.
The netbook with the ati hd4200 worked fine with the vesa driver or
the proprietary ati driver.
The vlc-2.0.0-i686-racy.sfs file also has the vlc_NLS-2.0.0-i686.pet
and the qt-everywhere-opensource-src-4.8.0-i686.pet included in it.
This new 2.0.0 version has support for dvb but I haven't tested that.
It should work in recent racy and wary releases.
EDIT: The dvb support isn't working.
The download link is:
http://www.datafilehost.com/download-70486827.html
I tested it in the new racy-5.2.2.7 beta on a pc with a nvidia
graphics card and a netbook with ati hd4200 graphics.
The pc with the nvidia card needed at least the nouveau driver
installed, it works fine with the proprietary nvidia driver too.
The netbook with the ati hd4200 worked fine with the vesa driver or
the proprietary ati driver.
The vlc-2.0.0-i686-racy.sfs file also has the vlc_NLS-2.0.0-i686.pet
and the qt-everywhere-opensource-src-4.8.0-i686.pet included in it.
This new 2.0.0 version has support for dvb but I haven't tested that.
It should work in recent racy and wary releases.
EDIT: The dvb support isn't working.
The download link is:
http://www.datafilehost.com/download-70486827.html
- Attachments
-
- vlcscrn.jpg
- (87.28 KiB) Downloaded 1472 times
Last edited by Billtoo on Wed 29 Feb 2012, 23:14, edited 1 time in total.
testing
just installed both on my 'new' box, noticed the glade (devx) icon is missing again. Both started ok without problems though, which is nice for once with me . Now to play!
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Re: Wary5.2.2.7
/usr/sbin/momanager: line 1284: [: edit_xml: unary operator expected
Code: Select all
# if [ "$EXIT" "edit_xml" ];then
if [ "$EXIT" = "edit_xml" ];then # fix
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Re: Wary5.2.2.7
/usr/local/Apps/ROX-Filer/Options.xml is opened in geany.
I have no idea how to proceed
http://rox.sourceforge.net/Manual/Manua ... .html#i18n
I have rox.mo available.
Have tried it
copied into
/usr/local/Apps/ROX-Filer/Messages/de/LC_MESSAGE
moved to
/usr/local/Apps/ROX-Filer/Messages/de.mo
and
/usr/local/Apps/ROX-Filer/Messages/de.gmo
without success.
I think all (I have checked some) translations for this Options.xml are in the mo file.
--------------------------
edited:
After restart of X ( ) options are translated
____________________________
yet another edit
This is what made me restart X:
http://murga-linux.com/puppy/viewtopic.php?t=76281
I have no idea how to proceed
quoted fromEdit `ROX-Filer/Options.xml' so that your language is listed, restart the filer and select it from the Options box (see the Translations section).
http://rox.sourceforge.net/Manual/Manua ... .html#i18n
I have rox.mo available.
Have tried it
copied into
/usr/local/Apps/ROX-Filer/Messages/de/LC_MESSAGE
moved to
/usr/local/Apps/ROX-Filer/Messages/de.mo
and
/usr/local/Apps/ROX-Filer/Messages/de.gmo
without success.
I think all (I have checked some) translations for this Options.xml are in the mo file.
--------------------------
edited:
After restart of X ( ) options are translated
____________________________
yet another edit
This is what made me restart X:
http://murga-linux.com/puppy/viewtopic.php?t=76281
Last edited by L18L on Sun 26 Feb 2012, 09:39, edited 1 time in total.
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Ah, the falling-back-to-English problem occurs when you change the SFS layers, such as loading the 'devx' SFS.BarryK wrote:I just did a test. Running 5.2.2.7, I changed to de_DE, then edited /etc/DISTRO_SPECS and changed the version back to 5.2.2.6, then rebooted.mave wrote:This Racy with internationalization changes seems to be great - thanks Barry!
Did updates from 5.2.2.6 to 5.2.2.3 on three machines. Every time german localization of desktop-icons falled back to english (menu entries okay).
Can't see why...
mave
After reboot, desktop icons are still 'de'.
Well, 5.2.2.6 and 5.2.2.3 are alpha releases, there must have been something odd in them that upset the version upgrade of the save-file.
Oh yes, there was, the SSS translation method changed.
Now that the SSS stuff has settled down, upgrading of save-file should be ok.
The problem is in /etc/rc.d/rc.update and has now been fixed.
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: Wary5.2.2.7
Thanks, fixed!L18L wrote:/usr/sbin/momanager: line 1284: [: edit_xml: unary operator expected
Code: Select all
# if [ "$EXIT" "edit_xml" ];then if [ "$EXIT" = "edit_xml" ];then # fix
I don't know how I manage to have such dumb typos sometimes!
...I guess that coding 10+ hours straight might be a contributing factor!
[url]https://bkhome.org/news/[/url]
Samba for wary/racy
With the Samba Simple Setup gui
samba_full-3.5.12-wary-racy.pet 36M
It's the full enchilada with docs and dev. It's still large split so I left it all in... libs and bins are stripped.
It would need inetd server for SWAT functionality. I didn't compile that.
3.6X wont compile due to older glibc, but this is as of Oct 2011, so recent enough.
With the Samba Simple Setup gui
samba_full-3.5.12-wary-racy.pet 36M
It's the full enchilada with docs and dev. It's still large split so I left it all in... libs and bins are stripped.
Code: Select all
./configure --prefix=/usr --enable-swat --enable-cups --localstatedir=/var --sysconfdir=/etc --with-statedir=/var/locks --with-configdir=/etc/samba
3.6X wont compile due to older glibc, but this is as of Oct 2011, so recent enough.
Puppy Linux Blog - contact me for access
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Wary5.2.2.8
.. and finding dumb typos enable normal coders contribute something usefulBarryK wrote:...
Thanks, fixed!
I don't know how I manage to have such dumb typos sometimes!
...I guess that coding 10+ hours straight might be a contributing factor!
BTW a bug in chooselocale
# locale -a
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
C
en_US
en_US.utf8
fr_FR.utf8
POSIX
# echo $LANG
fr_FR
#
fix see
http://www.murga-linux.com/puppy/viewto ... 2&start=34 please
Wary/Racy 5.3beta1 (5.2.2.7)
I did a full install of racy 5.2.2.8 to an acer desktop pc.
The CPU frequency scaling utility isn't working, it doesn't show any
options.
I copied the wcpufreq file from slacko into /usr/sbin and it's
working now.
Sun 26 Feb 2012 Operating System: Racy Puppy-5.2.2.8 Linux 3.0.17
0.0 VGA compatible controller:nVidia Corporation C77 [GeForce 8200] (rev a2)
0.0 VGA compatible controller:nVidia Corporation G98[GeForce 9300 GE] (rev a1)
oem: NVIDIA product: MCP77 Board - mcp78pvo Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.0
dimensions: 1440x900 pixels (411x263 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 9200/integrated/SSE2/3DNOW!
OpenGL version string: 3.3.0 NVIDIA 295.20
# glxgears
7108 frames in 5.0 seconds = 1421.409 FPS
7126 frames in 5.0 seconds = 1425.007 FPS
7139 frames in 5.0 seconds = 1427.795 FPS
Athlon(tm) Dual Core Processor 4850e
Core 0: 1000 1: 1000 MHz
The CPU frequency scaling utility isn't working, it doesn't show any
options.
I copied the wcpufreq file from slacko into /usr/sbin and it's
working now.
Sun 26 Feb 2012 Operating System: Racy Puppy-5.2.2.8 Linux 3.0.17
0.0 VGA compatible controller:nVidia Corporation C77 [GeForce 8200] (rev a2)
0.0 VGA compatible controller:nVidia Corporation G98[GeForce 9300 GE] (rev a1)
oem: NVIDIA product: MCP77 Board - mcp78pvo Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.0
dimensions: 1440x900 pixels (411x263 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 9200/integrated/SSE2/3DNOW!
OpenGL version string: 3.3.0 NVIDIA 295.20
# glxgears
7108 frames in 5.0 seconds = 1421.409 FPS
7126 frames in 5.0 seconds = 1425.007 FPS
7139 frames in 5.0 seconds = 1427.795 FPS
Athlon(tm) Dual Core Processor 4850e
Core 0: 1000 1: 1000 MHz
- Attachments
-
- wcpufreq.gz
- (23.68 KiB) Downloaded 724 times
-
- cpufreq.jpg
- (52.24 KiB) Downloaded 1719 times
Wary/Racy 5.3beta1 (5.2.2.7)
I did a full install of racy 5.2.2.8 to a compaq desktop pc.
Sun 26 Feb 2012 Operating System: Racy Puppy-5.2.2.8 Linux 3.0.17
2.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated
Graphics Controller (rev 10)
oem: Intel(r)Q33/Q35/G33 Graphics Chip Accelerated VGA BIOS product:
Intel(r)Q33/Q35/G33 Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: # vesa
X.Org version: 1.11.0
dimensions: 1280x1024 pixels (338x270 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) G33 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.10.3
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
301 frames in 5.0 seconds = 60.066 FPS
301 frames in 5.0 seconds = 60.021 FPS
301 frames in 5.0 seconds = 60.019 FPS
Pentium(R) Dual-Core CPU E5200
Core 0: 1200 1: 1200 MHz
I clicked on the install icon and used the sfs downloader, I used
ftp.nluug.nl repo to download the sfs files and it worked well, fast.
On my full install there was an error message that the sfs was not
found or was the wrong type but they were downloaded to /mnt/home. I
installed Shinobar's sfs_load-1.3.pet and used it to load the sfs
files, it worked great.
EDIT: I've been using this for a few hours now and no problems, it's working well, and fast.
Sun 26 Feb 2012 Operating System: Racy Puppy-5.2.2.8 Linux 3.0.17
2.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated
Graphics Controller (rev 10)
oem: Intel(r)Q33/Q35/G33 Graphics Chip Accelerated VGA BIOS product:
Intel(r)Q33/Q35/G33 Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: # vesa
X.Org version: 1.11.0
dimensions: 1280x1024 pixels (338x270 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) G33 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.10.3
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
301 frames in 5.0 seconds = 60.066 FPS
301 frames in 5.0 seconds = 60.021 FPS
301 frames in 5.0 seconds = 60.019 FPS
Pentium(R) Dual-Core CPU E5200
Core 0: 1200 1: 1200 MHz
I clicked on the install icon and used the sfs downloader, I used
ftp.nluug.nl repo to download the sfs files and it worked well, fast.
On my full install there was an error message that the sfs was not
found or was the wrong type but they were downloaded to /mnt/home. I
installed Shinobar's sfs_load-1.3.pet and used it to load the sfs
files, it worked great.
EDIT: I've been using this for a few hours now and no problems, it's working well, and fast.
- Attachments
-
- htopscrn.jpg
- (13.13 KiB) Downloaded 1570 times
-
- SFS-Load.jpg
- (60.39 KiB) Downloaded 1575 times
-
- sfs_load-1.3.pet
- (35.81 KiB) Downloaded 806 times
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
console font again
xorgwizard running in console seems missing the new console font .
I have noticed this because ö and ü had no correct display in dialogs.
prepending 1 line before line 335
zcat /lib/consolefonts/LatGrkCyr-8x16.psfu.gz | loadfont #120227
#do this code block if X is running...
and before 1570
zcat /lib/consolefonts/LatGrkCyr-8x16.psfu.gz | loadfont #120227
dialog --no-collapse --title "$(gettext 'Xorg Video Wizard')" --yes-label "$(gettext 'FINISHED')" --no-label "$(gettext 'Tweak')" --yesno "$(gettext 'Report on X test:')
`eval_gettext \"Resolution: \\\${XTEST}x\\\${YTEST} pixels\"`
and ö was correct !
console font has to be (re)loaded independent of locale changing ?!
Some ö´s in xorgwizard:
# pwd
/usr/share/locale/de/LC_MESSAGES
# msgunfmt xorgwizard.mo | grep lö
msgstr "Es ist möglich, Bildschrmauflösungen zu ändern, ohne X zu verlassen:"
msgstr "MEHR: weitere Bildschirmauflösungen anzeigen..."
msgstr "Ändern der Auflösung"
msgstr "Auflösung: ${XTEST}x${YTEST} pixels"
#
The last one is displayed as Auflölsung. Very strange.
Of course, this loadfont hack is just a hack for now...
Test yourself, lang_pack_de attached
-------------------------------------
edited concerning usability:
in dialog the buttons are always visible now so there is no more need for text like
TAB TAB ENTER to choose this or that...
Maybe just 1 new hint:
Use PAGE DOWN key to see entire text...
I have noticed this because ö and ü had no correct display in dialogs.
prepending 1 line before line 335
zcat /lib/consolefonts/LatGrkCyr-8x16.psfu.gz | loadfont #120227
#do this code block if X is running...
and before 1570
zcat /lib/consolefonts/LatGrkCyr-8x16.psfu.gz | loadfont #120227
dialog --no-collapse --title "$(gettext 'Xorg Video Wizard')" --yes-label "$(gettext 'FINISHED')" --no-label "$(gettext 'Tweak')" --yesno "$(gettext 'Report on X test:')
`eval_gettext \"Resolution: \\\${XTEST}x\\\${YTEST} pixels\"`
and ö was correct !
console font has to be (re)loaded independent of locale changing ?!
Some ö´s in xorgwizard:
# pwd
/usr/share/locale/de/LC_MESSAGES
# msgunfmt xorgwizard.mo | grep lö
msgstr "Es ist möglich, Bildschrmauflösungen zu ändern, ohne X zu verlassen:"
msgstr "MEHR: weitere Bildschirmauflösungen anzeigen..."
msgstr "Ändern der Auflösung"
msgstr "Auflösung: ${XTEST}x${YTEST} pixels"
#
The last one is displayed as Auflölsung. Very strange.
Of course, this loadfont hack is just a hack for now...
Test yourself, lang_pack_de attached
-------------------------------------
edited concerning usability:
in dialog the buttons are always visible now so there is no more need for text like
TAB TAB ENTER to choose this or that...
Maybe just 1 new hint:
Use PAGE DOWN key to see entire text...