Python Puplet (based on Racy)
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
Highly customizable and integrated, extensive XFCE desktop environmentIs it LXDE or Xfce
http://puppylinux.org/wikka/Saluki
Saluki will probably run on a p3 - hopefully with at least 512MB ram. A full install would help with ram usage and speed up the boot time.nooby wrote:Jemimah, what is it in Saluki that would make it fail to work on their older
computers then? If the school has been given Pentium III as a gift for
the kids?
Here is an example. I just built Gourmet, a recipe manager written in python. But it won't run without the following packages installed: Python, PIL,reportlab,SQLAlchemy. If you have a working PPM you can just specify those in the pet.specs file so when a user installs it, the dependencies are also downloaded and installed.antiloquax wrote: I'm afraid I don't quite know what you mean about "dependency resolution" - is this about making sure things will work on other versions?
If you use Racy, you will have to figure out how to set up your own repo. This is not as easy as it should be. It's taken me a month or so to get it going and I'm still fixing bugs.
- antiloquax
- Posts: 405
- Joined: Fri 27 Jan 2012, 09:17
Thanks jemimah, that makes sense. I did try to help Dromeno (on this forum) to get a working version of Gourmet and failed miserably!jemimah wrote:
Here is an example. I just built Gourmet, a recipe manager written in python. But it won't run without the following packages installed: Python, PIL,reportlab,SQLAlchemy. If you have a working PPM you can just specify those in the pet.specs file so when a user installs it, the dependencies are also downloaded and installed.
And I am writing this on my Pentium3 (512mb RAM) running Saluki, by the way!
Am I right in thinking that there isn't a Python3 package for Saluki (I looked in PPM). If that's so, I might have a go at putting together a pet for Python 3.1.4 as my first compile on Saluki.
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
- antiloquax
- Posts: 405
- Joined: Fri 27 Jan 2012, 09:17
Okay, I'll have a go.jemimah wrote:Correct. I've done all my python work with 2.7.
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
- antiloquax
- Posts: 405
- Joined: Fri 27 Jan 2012, 09:17
UPDATE:
I am working on the next version of this puplet. It will be based on Saluki.
Many thanks to Jemimah for helping me to get the IDLE working for Python 2.7.
The new version will include Python 2.7 and 3.1, both with Pygame. I am doing this because I know plenty of people have not made the shift to Python 3.
This time I will not bundle the devx in with the main .sfs, which should result in a smaller .iso for those who don't need to compile right away.
There will be more Python tutorials available for offline study.
I'm thinking that there may be quite a few people who didn't get a RPi from the first batch who will find this CD useful. As before the idea is that you can just boot from the CD and start coding, with no prior knowledge of Linux or Python.
I'll have to rename it - it can't be RacyPy - SalukiPy sounds nice too!
I am working on the next version of this puplet. It will be based on Saluki.
Many thanks to Jemimah for helping me to get the IDLE working for Python 2.7.
The new version will include Python 2.7 and 3.1, both with Pygame. I am doing this because I know plenty of people have not made the shift to Python 3.
This time I will not bundle the devx in with the main .sfs, which should result in a smaller .iso for those who don't need to compile right away.
There will be more Python tutorials available for offline study.
I'm thinking that there may be quite a few people who didn't get a RPi from the first batch who will find this CD useful. As before the idea is that you can just boot from the CD and start coding, with no prior knowledge of Linux or Python.
I'll have to rename it - it can't be RacyPy - SalukiPy sounds nice too!
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
- antiloquax
- Posts: 405
- Joined: Fri 27 Jan 2012, 09:17
Here's a screenshot of what "SalukiPy" will look like.
It has the lovely 'puptie' image as wallpaper.
You can see here that Pythons 2.7 and 3.1.4 are running and both have imported pygame without complaint.
I'm pleased!
It has the lovely 'puptie' image as wallpaper.
You can see here that Pythons 2.7 and 3.1.4 are running and both have imported pygame without complaint.
I'm pleased!
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
- antiloquax
- Posts: 405
- Joined: Fri 27 Jan 2012, 09:17
Thanks Tman!Tman wrote:Looks good, Antiloquax.
I am pleased with how it's turned out. By the way, I did look at Exprimo, but it wouldn't make the soundcard on my pc work, so that kind of swung it for Saluki!
@Jemimah - thanks for that. I'll probably hold on for that and rebuild from that version. I am now running from a fresh frugal install of "SalukiPy". The Pythons and Pygames are working properly. The only thing I don't know how to do is to keep the wallpaper and launcher looking as they should.
Here's a list of the Python tutorials to be included in this version:
A Byte of Python (Swaroop)
Dive into Python (Mark Pilgrim)
Making Games and Invent Your Own Games with Python (Al Sweigert)
Learn Python the Hard Way (Zed A. Shaw (as html files)
The documentation from Python.org for 3.1.4
Introduction to Computer Science Using Python and Pygame (Paul Vincent Craven)
How to Think Like a Computer Scientist.
I'll also add a current screen-shot!
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
pygobject and gtkk
Quite excited by this although it seems massive?
Is it possiible to write Gtk applications on this python 3? Or is it Tk windows only.
I have an appliication I would like to bundle with pupppy and this would seem a perfect solution.
Is there a python 3 glib pygobject .pet around?
I thought updating glib 2.10 to a later version would have nasty consequences for all other gtk applications? i..e. 95% of the systen.
Is it possiible to write Gtk applications on this python 3? Or is it Tk windows only.
I have an appliication I would like to bundle with pupppy and this would seem a perfect solution.
Is there a python 3 glib pygobject .pet around?
I thought updating glib 2.10 to a later version would have nasty consequences for all other gtk applications? i..e. 95% of the systen.
- antiloquax
- Posts: 405
- Joined: Fri 27 Jan 2012, 09:17
Hi Growler,
Yes, it is a big iso - partly because I made it from the racy sfs with the devx loaded. Perhaps I ought to have trimmed things more (eg there are quite a lot of "examples" that come with Pygame.)
I'm afraid I don't know anything really about gtk or pygobject. Tkinter is there of course .
mark
Yes, it is a big iso - partly because I made it from the racy sfs with the devx loaded. Perhaps I ought to have trimmed things more (eg there are quite a lot of "examples" that come with Pygame.)
I'm afraid I don't know anything really about gtk or pygobject. Tkinter is there of course .
mark
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
- antiloquax
- Posts: 405
- Joined: Fri 27 Jan 2012, 09:17
While I am waiting for Saluki13 to be ready, I've put together a better version of the original Racy-based idea.
I've updated the first post.
It's hosted on Ubuntu One this time:
http://ubuntuone.com/4oBKQ9tqOG5ljmOhpBYIeL
Here's my blog post with a few details.
http://teampython.wordpress.com/2012/03 ... e-racypy2/
I've updated the first post.
It's hosted on Ubuntu One this time:
http://ubuntuone.com/4oBKQ9tqOG5ljmOhpBYIeL
Here's my blog post with a few details.
http://teampython.wordpress.com/2012/03 ... e-racypy2/
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
- antiloquax
- Posts: 405
- Joined: Fri 27 Jan 2012, 09:17
Python and Pygame Pets available for Saluki14
I've made some pets for Saluki14.
This one is Pygame for Python 2.7.2 (you'll need python-tk, tk, tcl and all the SDL bits).
Thisis Python 3.1.4 with Pygame included. Dependencies as above.
This one is Pygame for Python 2.7.2 (you'll need python-tk, tk, tcl and all the SDL bits).
Thisis Python 3.1.4 with Pygame included. Dependencies as above.
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
- antiloquax
- Posts: 405
- Joined: Fri 27 Jan 2012, 09:17
When you load the devx, it breaks the shell-script that launches Python2.7.2.
This pet fixes it and the desktop icon should work again.
I'll fix this in the next version.
This pet fixes it and the desktop icon should work again.
I'll fix this in the next version.
- Attachments
-
- Py2.pet
- (374 Bytes) Downloaded 591 times
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
- antiloquax
- Posts: 405
- Joined: Fri 27 Jan 2012, 09:17
If you are using RacyPy2, you may wonder why Java isn't working with seamonkey..
I put the wrong link in the plugins folder.
Make a simlink to /usr/jre/lib/i386/libnpjp2.so in /usr/lib/mozilla/plugins
I'll fix this bug in the next version.
I put the wrong link in the plugins folder.
Make a simlink to /usr/jre/lib/i386/libnpjp2.so in /usr/lib/mozilla/plugins
I'll fix this bug in the next version.
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
- antiloquax
- Posts: 405
- Joined: Fri 27 Jan 2012, 09:17
Bugs Fixed
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
here is a wallpaper in 3 sizes for ya antiloquax.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us