Squeezed Arm Puppy for Raspberry Pi, alpha4
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
Yesterday I did an update of the ppm
(it took nearly two hours)
Was looking for an alternative to Chrome
in Debian Squeeze main
Not so sure there is one I prefer . . .
I did not install Iceweasel (yes I have read the Debian manifesto) or surf.
Java and python dependent browsers - not for me.
Not too inclined to find opera-mini.
Barryk is getting more tabs open in Chrome/Chromium (not sure which is the OS and which the browser and Google in an effort of 'no-evil' disinformation is blurring the line)
http://bkhome.org/blog/?viewDetailed=02883
I also tried using the sync setting facility, so you can have bookmarks and setup the same across devices using Chrome
Not too successful and Seamonkey has something similar though less advanced.
My inclination would be to use Chrome as a modern, mega browser. Familiar to many.
Guys if you have a chihuahua, will you be putting a solar powered webcam + raspberry pi on it? Just an idea. A camera is one of the first planned daughter-boards
(it took nearly two hours)
Was looking for an alternative to Chrome
in Debian Squeeze main
Not so sure there is one I prefer . . .
I did not install Iceweasel (yes I have read the Debian manifesto) or surf.
Java and python dependent browsers - not for me.
Not too inclined to find opera-mini.
Barryk is getting more tabs open in Chrome/Chromium (not sure which is the OS and which the browser and Google in an effort of 'no-evil' disinformation is blurring the line)
http://bkhome.org/blog/?viewDetailed=02883
I also tried using the sync setting facility, so you can have bookmarks and setup the same across devices using Chrome
Not too successful and Seamonkey has something similar though less advanced.
My inclination would be to use Chrome as a modern, mega browser. Familiar to many.
Guys if you have a chihuahua, will you be putting a solar powered webcam + raspberry pi on it? Just an idea. A camera is one of the first planned daughter-boards
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
Whilst time travelers prepare to generate their own Higgs field
I downloaded xcowsay . . . been playing about with that . . .
http://www.doof.me.uk/xcowsay/
. . . there is no cure . . .
http://youtu.be/MR5OZUWKbqw
I downloaded xcowsay . . . been playing about with that . . .
http://www.doof.me.uk/xcowsay/
. . . there is no cure . . .
http://youtu.be/MR5OZUWKbqw
@ Lobster
I tried aplay -Dplughw:X filename.wav, and yes, it works a little bit. This means, I get sound, but also some underrun errors (some drop outs) and after ~30sec it freezes.
Installed Aqualung, but it doesn't find any sound device. Well, not so important by now.
Also tried to update PPM, but after downloading the files, every line looks like
program name /usr/local/petget/find_cat: line1: syntax error: unexpected "(".
On the positive side, it seems to be easy to boot sap6 from usb hd. Also to use a swap partition there (you still need partition 1 of the sd card).
I think, antiloquax posted about that before, but can't find it .
i just copied the content of mm0p2 to a free partition of a usb hd and changed in cmdline.txt root=/dev/mmcblk0p2 to root=/dev/sda1(the partition where my Puppy files are), and rootfstype=ext4 to rootfstype=ext3. At first run it took ~6 sec. longer (41sec. instead of 35sec.) Now I deleted the content of mm0p2 and also the swap partition on the sd card (I have one on the usb hd). Works fine.
~Rolf
Edit: Nice video today, Lobster
I tried aplay -Dplughw:X filename.wav, and yes, it works a little bit. This means, I get sound, but also some underrun errors (some drop outs) and after ~30sec it freezes.
Installed Aqualung, but it doesn't find any sound device. Well, not so important by now.
Also tried to update PPM, but after downloading the files, every line looks like
program name /usr/local/petget/find_cat: line1: syntax error: unexpected "(".
Also here. Choosing "Cancel" stops installing the 2nd time. First times I thougt that it was me, being less patient. Or my keyboard. Often it forgets a letter or a key "hangs" (like pressed permanently). I don't think, that it's a mechanical problem, too many different keys are involved. If I'm alone with this problem, it's nonetheless probablly my keyboard.eowens2 wrote:The Puppy Package Manager still seems to be struggling to do its thing...it seems to want to install the program again after it reports having successfully installed it.
On the positive side, it seems to be easy to boot sap6 from usb hd. Also to use a swap partition there (you still need partition 1 of the sd card).
I think, antiloquax posted about that before, but can't find it .
i just copied the content of mm0p2 to a free partition of a usb hd and changed in cmdline.txt root=/dev/mmcblk0p2 to root=/dev/sda1(the partition where my Puppy files are), and rootfstype=ext4 to rootfstype=ext3. At first run it took ~6 sec. longer (41sec. instead of 35sec.) Now I deleted the content of mm0p2 and also the swap partition on the sd card (I have one on the usb hd). Works fine.
~Rolf
Edit: Nice video today, Lobster
Ich verwende "frugal", und das ist gut so. :wink:
Raspberry Pi without Puppy? No, thanks.
Raspberry Pi without Puppy? No, thanks.
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
Thanks Rolf
Looking forward to alpha3. Looks like Barry has many tricks from no swap drive, fast file system etc - oh yeah.
USB keydrive was temperamental - several versions of the desktop icon and I could not transfer files from SAP to the drive - though I managed it the other way - onto the Raspberry Pi.
Another issue. On my early Debian (pre SAP) the image took up the whole screen - now it is partial both on the later Debian and consequently Puppi.
I did try using ffmpeg to record the video but without full screen success
xcowsay is a lot of fun - check it out
http://www.murga-linux.com/puppy/viewto ... 491#429491
The video was run from a rather flawed bash script
recorded on Ipad and uploaded and edited on youtube
I will upload the script after I get it working a bit better.
Puppy Linux is Pawsome
Looking forward to alpha3. Looks like Barry has many tricks from no swap drive, fast file system etc - oh yeah.
USB keydrive was temperamental - several versions of the desktop icon and I could not transfer files from SAP to the drive - though I managed it the other way - onto the Raspberry Pi.
Another issue. On my early Debian (pre SAP) the image took up the whole screen - now it is partial both on the later Debian and consequently Puppi.
I did try using ffmpeg to record the video but without full screen success
xcowsay is a lot of fun - check it out
http://www.murga-linux.com/puppy/viewto ... 491#429491
The video was run from a rather flawed bash script
recorded on Ipad and uploaded and edited on youtube
I will upload the script after I get it working a bit better.
Puppy Linux is Pawsome
I have Pi (the real type)
I can't get sound to work over hdmi but I can over analog. (May be the really cheap telly and hdmi cable )
The "1" on the end forces analog.
Tried a DVD, plays, unwatchable
Tried a CD, excellent
I can't get sound to work over hdmi but I can over analog. (May be the really cheap telly and hdmi cable )
Code: Select all
modprobe snd_bcm2835
amixer cset numid=3 1
Tried a DVD, plays, unwatchable
Tried a CD, excellent
Puppy Linux Blog - contact me for access
Pmusic seems to fail
Mplayer plays mp3 just fine
Gnome-mplayer is not too bad with mp4 and avi video, a bit scratchy
Compiled volumeicon but it doesn't quite work, I may email the developer. It shows in the tray ok, but preferences don't work and the volume only decreases to about 50% instead of mute when the thing says 0%. Obmixer doesn't show up at startup but does kind of work
More as I go, see if I can help fix anything
Mplayer plays mp3 just fine
Gnome-mplayer is not too bad with mp4 and avi video, a bit scratchy
Compiled volumeicon but it doesn't quite work, I may email the developer. It shows in the tray ok, but preferences don't work and the volume only decreases to about 50% instead of mute when the thing says 0%. Obmixer doesn't show up at startup but does kind of work
More as I go, see if I can help fix anything
Puppy Linux Blog - contact me for access
Ahah!Lobster wrote: Another issue. On my early Debian (pre SAP) the image took up the whole screen - now it is partial both on the later Debian and consequently Puppi.
Lobster, if you mount the first partition you see the file "config.txt"
Under where it says "hdmi_force_hotplug=1" add a line thus:
Code: Select all
disable_overscan=1
Enjoy your newly gained screen real estate
Puppy Linux Blog - contact me for access
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
Gosh I knew that and forgot it . . .Under where it says "hdmi_force_hotplug=1" add a line thus:
Code:
disable_overscan=1
many thanks for reminder
Also thanks for new record script.
I will try that shortly on Rpi hardware
Poor Rolf having to work from a flooded cellar . . .
. . . meanwhile Barry is discussing improvements with the smart dogs about better file management
You know that File-Sharing prog that we are accustomed to in Puppy? I think HairyWill wrote it, may be wrong, sorry if so, but anyway it's fixed for armv6. I compiled the binaries it depends on.
Barry, should be fine I have successfully tested and transfered files over wireless.
Install all pets below (you can omit the curlftpfs_DOC and pure-ftpd_DOC pet if you wish)
Lobster, this is better technology than "sneakernet"
Enjoy!
EDIT: forgot about pure-ftpd, added
EDIT: fixed the file_sharing_nobins package
Barry, should be fine I have successfully tested and transfered files over wireless.
Install all pets below (you can omit the curlftpfs_DOC and pure-ftpd_DOC pet if you wish)
Lobster, this is better technology than "sneakernet"
Enjoy!
EDIT: forgot about pure-ftpd, added
EDIT: fixed the file_sharing_nobins package
- Attachments
-
- mpscan-0.1.0-armv6.pet
- (5.19 KiB) Downloaded 524 times
-
- pure-ftpd-1.0.36-armv6.pet
- (97.34 KiB) Downloaded 579 times
-
- pure-ftpd_DOC-1.0.36-armv6.pet
- (17.1 KiB) Downloaded 551 times
-
- file_sharing_no_bins-0.2-0.9.1-0.1.1.pet
- (29.99 KiB) Downloaded 563 times
-
- curlftpfs-0.9.2-armv6.pet
- (20.84 KiB) Downloaded 534 times
-
- curlftpfs_DOC-0.9.2-armv6.pet
- (4.74 KiB) Downloaded 537 times
Last edited by 01micko on Wed 11 Jul 2012, 00:56, edited 1 time in total.
Puppy Linux Blog - contact me for access
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
Oh good news - missed that.I have Pi (the real type)
gotta go Barry has released latest SAP - oh yeah . . .
http://bkhome.org/blog/?viewDetailed=02890
edit: Oh no
No Puppy
this is the woof system on Raspberry Pi.
I am not very good with woof but Mick should be able to use it
Regarding sound - the most I ever got out of it was a tone (from a generator) - just to test the hardware.
Hi,
got omxplayer working with sap6 .
A lot of missing libs, but it was easy to fix.
It's a simple console player (I guess only avi and mp4), but with GPU support and it works. At least with one (of 2) HD movies, which I've tested (Ghost Rider, don't ask, from where I got it ). The other one works also, but with a lousy resolution). Sound only via audio jack, but sound and video are flawlessly.
Will try to build a pet soon .
Cheers,
Rolf
got omxplayer working with sap6 .
A lot of missing libs, but it was easy to fix.
It's a simple console player (I guess only avi and mp4), but with GPU support and it works. At least with one (of 2) HD movies, which I've tested (Ghost Rider, don't ask, from where I got it ). The other one works also, but with a lousy resolution). Sound only via audio jack, but sound and video are flawlessly.
Will try to build a pet soon .
Cheers,
Rolf
Ich verwende "frugal", und das ist gut so. :wink:
Raspberry Pi without Puppy? No, thanks.
Raspberry Pi without Puppy? No, thanks.
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
http://mitchtech.net/raspberry-pi-audio/
That is for sound - not tried?
That is for sound - not tried?
Lobster,
We already have alsa, and that site is where I got the instructions that I posted. Should work for analog.
-
I have been trying to get PNethood to work, no go so far. It probably would work with the debian smbclient but I saw the installed size was over 40MB
I succeeded in compiling samba-tng, 2 MB compressed but it doesn't see windows shares! Sees samba shares (linux based) fine. It's probably a bit old (2009). The alternative is to compile Samba and grab smbclient out of that but I think it would take a day to compile! Later.. maybe.
Might see if I can ftp to a windows box, that's good enough.
We already have alsa, and that site is where I got the instructions that I posted. Should work for analog.
-
I have been trying to get PNethood to work, no go so far. It probably would work with the debian smbclient but I saw the installed size was over 40MB
I succeeded in compiling samba-tng, 2 MB compressed but it doesn't see windows shares! Sees samba shares (linux based) fine. It's probably a bit old (2009). The alternative is to compile Samba and grab smbclient out of that but I think it would take a day to compile! Later.. maybe.
Might see if I can ftp to a windows box, that's good enough.
Puppy Linux Blog - contact me for access
Hi,
I tried it Lobster, but with omxplayer only amixer cset numid=3 1 (for audio jack) seems to work for me .
The pet is ready, but 4.785MB seems to be too big for here
Some weeks ago I was thinking about such a situation and found a file server for free with 5GB amount. Damn, can't remember the name . Must meditate
Will be back soon,
Rolf
Edit: here is the link: https://www.hidrive.strato.com/lnk/pSMjQ4Kt
Install it, go to the folder with your movie, open a terminal there and type omxplayer name_of_your_file. Enjoy (hopefully ).
You can use (P)ause, (Q)uit and right/left arrow.
It looks like to be only a temporary solution. It's limited for 30 days and 5 downloads only. Then I must enable again
Edit2: Mick kindly mirrored it here: http://www.smokey01.com/01micko/raspi_p ... -0.0.1.pet. Thank you
I tried it Lobster, but with omxplayer only amixer cset numid=3 1 (for audio jack) seems to work for me .
The pet is ready, but 4.785MB seems to be too big for here
Some weeks ago I was thinking about such a situation and found a file server for free with 5GB amount. Damn, can't remember the name . Must meditate
Will be back soon,
Rolf
Edit: here is the link: https://www.hidrive.strato.com/lnk/pSMjQ4Kt
Install it, go to the folder with your movie, open a terminal there and type omxplayer name_of_your_file. Enjoy (hopefully ).
You can use (P)ause, (Q)uit and right/left arrow.
It looks like to be only a temporary solution. It's limited for 30 days and 5 downloads only. Then I must enable again
Edit2: Mick kindly mirrored it here: http://www.smokey01.com/01micko/raspi_p ... -0.0.1.pet. Thank you
Last edited by rhadon on Sat 07 Jul 2012, 13:09, edited 1 time in total.
Ich verwende "frugal", und das ist gut so. :wink:
Raspberry Pi without Puppy? No, thanks.
Raspberry Pi without Puppy? No, thanks.
- antiloquax
- Posts: 405
- Joined: Fri 27 Jan 2012, 09:17
Hi. Great to see the progress being made ...
I haven't done much with my SAP yet.
My first priority is to get Python 3 and Pygame working.
I installed Tk and TCL and then compiled Python, but it couldn't find the tkinter module. I will try again when I have some more time.
mark
I haven't done much with my SAP yet.
My first priority is to get Python 3 and Pygame working.
I installed Tk and TCL and then compiled Python, but it couldn't find the tkinter module. I will try again when I have some more time.
mark
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
I mirrored it here Rolf:rhadon wrote: Edit: here is the link: https://www.hidrive.strato.com/lnk/pSMjQ4Kt
Install it, go to the folder with your movie, open a terminal there and type omxplayer name_of_your_file. Enjoy (hopefully ).
You can use (P)ause, (Q)uit and right/left arrow.
It looks like to be only a temporary solution. It's limited for 30 days and 5 downloads only. Then I must enable again
http://www.smokey01.com/01micko/raspi_p ... -0.0.1.pet
lucky too, I think I was the 5th download!
Cheers
Puppy Linux Blog - contact me for access
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
That is now fixed, see here:rhadon wrote:After first tests, I can see only one small glitch. After disconnecting usb drives, the drive icons doesn't disappear.
http://bkhome.org/blog/?viewDetailed=02893
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Great, I have uploaded the PETs to ibiblio:01micko wrote:You know that File-Sharing prog that we are accustomed to in Puppy? I think HairyWill wrote it, may be wrong, sorry if so, but anyway it's fixed for armv6. I compiled the binaries it depends on.
Barry, should be fine I have successfully tested and transfered files over wireless.
Install all pets below (you can omit the curlftpfs_DOC and pure-ftpd_DOC pet if you wish)
Lobster, this is better technology than "sneakernet"
Enjoy!
EDIT: forgot about pure-ftpd, added
http://bkhome.org/blog/?viewDetailed=02894
01micko, note that your file_sharing_no_bins has the x86 binaries in it still.
I also compiled Planner project manager and created PETs, see link.
[url]https://bkhome.org/news/[/url]