FFConvert - multimedia converter
subtitle into a video
I have not tried yet but maybe you can put additional options with the text filename in the 'Advanced options' at the video setting.gojko wrote:How to burning subtitle into a video with FFConvert?
See the ffmpeg online document on the additional options.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Re: subtitle into a video
Thanks! I will try.
Update: ffconvert-1.2.2
Update: ffconvert-1.2.2.pet
http://shino.pos.to/linux/puppy/
# v1.2.2 - 30 Apr 2012: fix was failed 2-pass converting, fix was not allowed spaces in the destination path, again codec list under some locale(tnx to Karl Godt)
EDIT: Sorry but ffconvert-1.2.2.pet was uploaded again at 2012-05-02 with same filename. Please check the time stamp or the file /usr/bin/ffmpeg.
http://shino.pos.to/linux/puppy/
# v1.2.2 - 30 Apr 2012: fix was failed 2-pass converting, fix was not allowed spaces in the destination path, again codec list under some locale(tnx to Karl Godt)
EDIT: Sorry but ffconvert-1.2.2.pet was uploaded again at 2012-05-02 with same filename. Please check the time stamp or the file /usr/bin/ffmpeg.
# v1.2.2 - 2 Mar 2012: fix was odd essage under some non UTF-8 loacle
VERSION="1.2.2"
CREDIT="FFConvert v.$VERSION"
TITLE=$CREDIT
MYNAME=$(basename $0)
export TEXTDOMAIN=ffconvert #$MYNAME
export OUTPUT_CHARSET=UTF-8 # v1.2.2 - 2 Mar 2012
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
ffconvert-1.2.2.pet was re-uploaded on 2012-05-02
Sorry but ffconvert-1.2.2.pet was uploaded again at 2012-05-02 with same filename. Please check the time stamp or the file /usr/bin/ffmpeg.
See the post above.
See the post above.
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
libc.mo
This has brought me to the idea of adding libc.mo to next langpack_deKarl Godt wrote:...
*
Installing some /usr/share/locale/*/LC_MESSAGES/glibc.mo i compiled with --prefix=/opt/glibc-2.6.1 by simply copying them there solved the 3 warnings i got by locale command :Took me several weeks to figure that out that this meant the glibc.mo and not a /usr/lib/locale/default link to a directory ...locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
*
I hope i have not fogotten anything .
Thank you, Karl.
Cannot set LC_* to default locale
I guess those error messages are caused by lacking /usr/lib/locale/${LANG} contents or illegal LANG value, never mean the glibc.mo.Karl Godt wrote:Installing some /usr/share/locale/*/LC_MESSAGES/glibc.mo i compiled with --prefix=/opt/glibc-2.6.1 by simply copying them there solved the 3 warnings i got by locale command :locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
fconvert-1.2.9
New test release: ffconvert-1.2.9.pet (2012-05-26)
http://shino.pos.to/linux/puppy/
New features:
1. Additional audio track. You can combine the 1st file for video and the 2nd for audio.
2. Screen capture. Note this feature is available on the Lupu and Slacko. Wary/Racy cannot.
Video using the screen capture:
http://www.youtube.com/watch?v=_8hcLmfxv8Y
http://shino.pos.to/linux/puppy/
New features:
1. Additional audio track. You can combine the 1st file for video and the 2nd for audio.
2. Screen capture. Note this feature is available on the Lupu and Slacko. Wary/Racy cannot.
Video using the screen capture:
http://www.youtube.com/watch?v=_8hcLmfxv8Y
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Hi shinobar; I didn`t read the whole forum thread as it`s quite long.
Does ffconvert do ffmpeg x264 with the quality setting and single pass?
This is the best all around method, fast one pass and easy to set quality.
I`ve been using Handbrake, but it`s far more complex than is needed.
I tried the old ffconvert and it didn`t work, but I hope the new one does.
Does ffconvert do ffmpeg x264 with the quality setting and single pass?
This is the best all around method, fast one pass and easy to set quality.
I`ve been using Handbrake, but it`s far more complex than is needed.
I tried the old ffconvert and it didn`t work, but I hope the new one does.
Re: ffmpeg x264
Depends on the ffmpeg and the Puppy version.sunburnt wrote:I tried the old ffconvert and it didn`t work, but I hope the new one does.
What Puppy are you using?
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
It was maybe a year ago I tried ffconvert, not really that important.
Now I use Puppy-528-005 Lucid with Handbrake.
But Handbrake is more complex than is needed.
###
Just need audio stream selection, video and audio output format, and a few other options.
Perhaps this is in some of the preset files that ffconvert can use?
###
Q: Does ffconvert do x264 "quality based" encoding?
OR, are you planning on adding that to it?
Now I use Puppy-528-005 Lucid with Handbrake.
But Handbrake is more complex than is needed.
###
Just need audio stream selection, video and audio output format, and a few other options.
Perhaps this is in some of the preset files that ffconvert can use?
###
Q: Does ffconvert do x264 "quality based" encoding?
OR, are you planning on adding that to it?
Last edited by sunburnt on Thu 14 Jun 2012, 19:34, edited 1 time in total.
X264 on lupu-528
I recommend Pmusic Upgrade 005 and ffconverter 1.2.9.sunburnt wrote:Now I use Puppy-528-005 Lucid
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
ffconvert-1.3
Crrent: ffconvert-1.3.pet (2012-06-17)
http://shino.pos.to/linux/puppy/
You need not upgrade if you are content with the v.1.2.9.
# v1.2.9 - 26 May 2012: x11grab, mkplaylist, notebook, preset group
# v1.3 - 17 Jun 2012: upport avconv, fix unsupported codec error message, gtkdialog to avoid yaf-splash incompatibility, vcd for the default
http://shino.pos.to/linux/puppy/
You need not upgrade if you are content with the v.1.2.9.
# v1.2.9 - 26 May 2012: x11grab, mkplaylist, notebook, preset group
# v1.3 - 17 Jun 2012: upport avconv, fix unsupported codec error message, gtkdialog to avoid yaf-splash incompatibility, vcd for the default
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
isync
Try '-isync' as the advanced options if you encounter no sync with the video and audio when grabing X by the ffconvert 2.9.1 and later.
(Thanks to smokey01)
(Thanks to smokey01)
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Screen capture on Wary/Racy-5.3, Puppy-4.x
FFConvert-1.3 supports screen capture. But you need to upgrade ffmpeg for Wary/Racy-5.3 or Puppy-4.x.
For Wary/Racy-5.3, install FFmpeg-0.8.12 to enable screen capture.
For Puppy-4.x, install ffmpeg-0.7.6.
You need not upgrade ffmpeg for slacko, dpup and most of Pupplet-5.x.
For the lucid puppy, the Pmusic Upgrade 005 is recommended.
For Wary/Racy-5.3, install FFmpeg-0.8.12 to enable screen capture.
For Puppy-4.x, install ffmpeg-0.7.6.
You need not upgrade ffmpeg for slacko, dpup and most of Pupplet-5.x.
For the lucid puppy, the Pmusic Upgrade 005 is recommended.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
[TIPS] CAPTURE_SOUND
TIPS:
ffconvert-1.3 has additional options in /usr/bin/ffconvert at line 80:
CAPTURE_SOUND="hw:0,0"
It specifies the sound device associates the screen capture.
"hw:0,0" means card 0, device 0.
You can edit the value by a text editor.
To see the available hardware, type the command 'arecord -l':
The mixer setting can be tested by the recording feature of the mhWaveEdit.
ffconvert-1.3 has additional options in /usr/bin/ffconvert at line 80:
CAPTURE_SOUND="hw:0,0"
It specifies the sound device associates the screen capture.
"hw:0,0" means card 0, device 0.
You can edit the value by a text editor.
To see the available hardware, type the command 'arecord -l':
Code: Select all
# arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC1200 Digital [ALC1200 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 2: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
- antiloquax
- Posts: 405
- Joined: Fri 27 Jan 2012, 09:17
Re: [TIPS] CAPTURE_SOUND
Thanks for this Shinobar. I think I know what to do now (to get my USB headset working!)shinobar wrote:TIPS:
ffconvert-1.3 has additional options in /usr/bin/ffconvert at line 80:
CAPTURE_SOUND="hw:0,0"
It specifies the sound device associates the screen capture.
"hw:0,0" means card 0, device 0.
You can edit the value by a text editor.
The mixer setting can be tested by the recording feature of the mhWaveEdit.
mark
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.
Hi shinobar,
I'm using the latest FFconvert on Akita...
I get errors when trying to screen capture, with the ALSA option hw:0,0
To fix this, I must change the option to plughw:0,0
Can this be auto detected and done for users by ffconvert?
Also, I get errors about a missing -r option ... Each time this happens the -r 29.97 option has many spaces before it (not only 1), and it is separated from the -f 1024x768 option...
I can fix the errors about the missing -r option, if I move the -r option immediately after -f 1024x768 , and remove all double/triple spaces from the ffmpeg command....
Example:
From FFconvert (doesn't work):
the above gives:
Edited, moved -r option and extra spaces (still doesn't work):
the above gives
Edited again, using plughw (works):
I hope you can fix these issues, so that I don't need to manually edit the command in a text editor, then paste back in to a terminal...
I'm using the latest FFconvert on Akita...
Code: Select all
FFmpeg version SVN-r25158-snapshot, Copyright (c) 2000-2010 the FFmpeg developers
built on Aug 15 2012 23:04:19 with gcc 4.3.4
Code: Select all
hw:0,0: Input/Output error...
Can this be auto detected and done for users by ffconvert?
Also, I get errors about a missing -r option ... Each time this happens the -r 29.97 option has many spaces before it (not only 1), and it is separated from the -f 1024x768 option...
I can fix the errors about the missing -r option, if I move the -r option immediately after -f 1024x768 , and remove all double/triple spaces from the ffmpeg command....
Example:
From FFconvert (doesn't work):
Code: Select all
/usr/bin/ffmpeg -f alsa -i hw:0,0 -f x11grab -s 1024x768 -i :0.0 -t 60 -y -f avi -vcodec msmpeg4 -b 1000k -s 640x480 -aspect 4:3 -r 25 -acodec pcm_s16le -ab 160k -ar 44100 -ac 2 "/root/Desktop/x11grab.avi"
Code: Select all
[x11grab @ 0x8080890] AVParameters don't have video size and/or rate. Use -s and -r.
:0.0: Input/output error
Code: Select all
/usr/bin/ffmpeg -f alsa -i hw:0,0 -f x11grab -s 1024x768 -r 25 -i :0.0 -t 60 -y -f avi -vcodec msmpeg4 -b 1000k -s 640x480 -aspect 4:3 -acodec pcm_s16le -ab 160k -ar 44100 -ac 2 "/root/Desktop/x11grab.avi"
Code: Select all
[alsa @ 0x8076470] cannot set channel count to 1 (Invalid argument)
hw:0,0: Input/output error
Code: Select all
/usr/bin/ffmpeg -f alsa -i plughw:0,0 -f x11grab -s 1024x768 -r 25 -i :0.0 -t 60 -y -f avi -vcodec msmpeg4 -b 1000k -s 640x480 -aspect 4:3 -acodec pcm_s16le -ab 160k -ar 44100 -ac 2 "/root/Desktop/x11grab.avi"
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]