FATSlacko
starhawk,
Doubtless you'll have some compelling reason why you cannot leave any selected LibreOffice program(s) minimised for future instant access.
So, possibly: http://www.codechewing.com/library/spee ... load-time/ may help.
Is forever >5", >10", >15", or what?
My regards
PS In another thread you agreed SeaMonkey stinks. RSVP there.
Doubtless you'll have some compelling reason why you cannot leave any selected LibreOffice program(s) minimised for future instant access.
So, possibly: http://www.codechewing.com/library/spee ... load-time/ may help.
Is forever >5", >10", >15", or what?
My regards
PS In another thread you agreed SeaMonkey stinks. RSVP there.
Upon clicking the icon "write" on the desktop to bring up LO Writer, it takes upwards of a minute before the screen appears. I can time it exactly if you so desire
On a system as modern as this, that's simply unacceptable. My laptop (less capable and older Core2Duo, spoiled with a copy of WinXP) takes about half that time to open the same. There's a problem here!
I will see if that website's tips are helpful in a little while.
I do not see a reply from you (or anyone else, for that matter) to my Seamonkey post in the thread you mention -- or am I confused as to what you meant?
On a system as modern as this, that's simply unacceptable. My laptop (less capable and older Core2Duo, spoiled with a copy of WinXP) takes about half that time to open the same. There's a problem here!
I will see if that website's tips are helpful in a little while.
I do not see a reply from you (or anyone else, for that matter) to my Seamonkey post in the thread you mention -- or am I confused as to what you meant?
Someone posted over at the Inkscape forum about that program being slow to start. Its often something that is over looked by developers. In Inkscape the bottle neck appears to be in the font loading.
Someone has reported a bug with the logo display timing a long time in LibreOffice see (maybe windows only though)-
https://bugs.freedesktop.org/show_bug.cgi?id=46436
Someone has reported a bug with the logo display timing a long time in LibreOffice see (maybe windows only though)-
https://bugs.freedesktop.org/show_bug.cgi?id=46436
I cannot duplicate this problem. I set up an old HP Athlon machine with 768 MB (the minimum recommended RAM). I did a frugal install of FATSlacko onto a USB hard drive.starhawk wrote:Upon clicking the icon "write" on the desktop to bring up LO Writer, it takes upwards of a minute before the screen appears.
After bootup, I can launch Writer in under 10 seconds. Subsequent starts only take 3 seconds.
However, my install only has LibreOffice in the menus, not on the desktop. So I don't know why your setup should be so different from mine.
OK, that's really really weird.
I'm running a frugal install to the HD, a spare 160gb IDE model. I hope the drive isn't failing!
EDIT: if it is, no big, I've got desktop IDE drives aplenty.
EDIT2: Processor spec shows up at boot, hadn't noticed. Here's detailed specs, then...
200W Dell Power Supply
Athlon64 3500+ Socket AM2 CPU
2gb RAM (as 2x512mb + 1x1024mb)
160gb IDE HDD (random from spares)
Dell OEM Foxconn ATi RADEON X600 PCIe x16 Graphics Card (phew!)
WiFi card (random from spares)
Er, one other question... how can I keep the SFS-Load-On-The-Fly popup from popping up each and every boot?
EDIT3: Jasper, your article helped a lot -- although the quickstarter is apparently optional and was not included in the build for FATSlacko. A pity.
I'm running a frugal install to the HD, a spare 160gb IDE model. I hope the drive isn't failing!
EDIT: if it is, no big, I've got desktop IDE drives aplenty.
EDIT2: Processor spec shows up at boot, hadn't noticed. Here's detailed specs, then...
200W Dell Power Supply
Athlon64 3500+ Socket AM2 CPU
2gb RAM (as 2x512mb + 1x1024mb)
160gb IDE HDD (random from spares)
Dell OEM Foxconn ATi RADEON X600 PCIe x16 Graphics Card (phew!)
WiFi card (random from spares)
Er, one other question... how can I keep the SFS-Load-On-The-Fly popup from popping up each and every boot?
EDIT3: Jasper, your article helped a lot -- although the quickstarter is apparently optional and was not included in the build for FATSlacko. A pity.
starhawk,
This is definitely worth trying. Install PupMenu 2.8.1 pet from radky if you don't already have it. Load libreoffice-startcenter then load writer, calc or whatever from StartCentre - you may find it faster than loading any particular program directly.
To re-launch use the Launch history button.
My regards
You said the earlier link helped. Approximately how many seconds did it save and if PupMenu helps, how many extra seconds does that save?
Also, what is your compelling reason why you cannot leave slow loading apps minimised to your tray - so enabling instantaneous reuse with a single click?
This is definitely worth trying. Install PupMenu 2.8.1 pet from radky if you don't already have it. Load libreoffice-startcenter then load writer, calc or whatever from StartCentre - you may find it faster than loading any particular program directly.
To re-launch use the Launch history button.
My regards
You said the earlier link helped. Approximately how many seconds did it save and if PupMenu helps, how many extra seconds does that save?
Also, what is your compelling reason why you cannot leave slow loading apps minimised to your tray - so enabling instantaneous reuse with a single click?
starhawk,
See the picture and google to find the pet, then run it and make your choices then your LO sfs will be made automatically.
Making the sfs look about 20 minutes (with my high quality 1998 desktop with 2002 motherboard replacement and slow Broadband).
The first run of the sfs took about a minute - the second loading was very fast - you tell us how fast it is for you. If it isn't fast get your machine repaired or ........
I use an ext4 formatted 16GB usb2 flash stick, said to read @ 22MB/s which cost about US$10 delivered.
My regards
See the picture and google to find the pet, then run it and make your choices then your LO sfs will be made automatically.
Making the sfs look about 20 minutes (with my high quality 1998 desktop with 2002 motherboard replacement and slow Broadband).
The first run of the sfs took about a minute - the second loading was very fast - you tell us how fast it is for you. If it isn't fast get your machine repaired or ........
I use an ext4 formatted 16GB usb2 flash stick, said to read @ 22MB/s which cost about US$10 delivered.
My regards
- Attachments
-
- LO-3.6.1-and-Slacko-5.3.1.jpg
- (5.87 KiB) Downloaded 629 times
FATSlacko does not need any install for either of the followings:
As he has shown, it appears that there is something that is creating an interference.
I am going to ASSUME you did NOT remaster FATSlacko. Let try this:
- JRE
- LO
- SAMBA
As he has shown, it appears that there is something that is creating an interference.
I am going to ASSUME you did NOT remaster FATSlacko. Let try this:
- Restart FATSlacko. At BOOT menu, type the following
Code: Select all
puppy pfix=ram
- Setup FirstRUN with all of you proper localization needs including the hostname
- This will cause a desktop restart (not a system reboot...a desktop restart).
- Please "time" the 2 following items and post back, please
- First, Go to the MENU>Business>LO (or writer)
- Next, click the Write Icon on the desktop to start LO Writer
hello:
I am using Fat Slako from a couple of weeks now, really liked it.
I want to discuss one thread, which I found.
I used wireless modem once using fat slako's pupdail without any trouble. Since thn I have to configure my LAN card settings on every boot, Dont know why this is happening.
Note: I am using FRUGAL Installation.
Any Idea ?
Thnx in Advance.
Regards
UMAIR
I am using Fat Slako from a couple of weeks now, really liked it.
I want to discuss one thread, which I found.
I used wireless modem once using fat slako's pupdail without any trouble. Since thn I have to configure my LAN card settings on every boot, Dont know why this is happening.
Note: I am using FRUGAL Installation.
Any Idea ?
Thnx in Advance.
Regards
UMAIR
FatSlacko being more complete than standard Slacko
how do I install Spotify what files does it still need for spotify to work?
And Screeny in Standard Slacko needing xwd that is missing
is that included in FatSlacko?
http://www.murga-linux.com/puppy/viewtopic.php?t=76204
how do I install Spotify what files does it still need for spotify to work?
And Screeny in Standard Slacko needing xwd that is missing
is that included in FatSlacko?
http://www.murga-linux.com/puppy/viewtopic.php?t=76204
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
Fat for Slacko 5.4?
I'm hoping there is going to be a v5.4 version of Fatslacko. Saves me from installing the extra stuff. Will there be one?
--Ray.
--Ray.
Never tried FAT Slacko.
Thin Slacko is one of my prefered puppies. Never tried FAT Slacko.
Dowloading. Sure i will remove LibreOfice as since four years, i have been retired from Business. Goffice will be enough if i had to type some letters to administration or taxes services.
For family, i still use my pencil.
But I Will Add XFCE to get The Puppy fat again.
There are newer Puppy Slacko ? Yes, i know. I bought my Medion feb 2012. Fat Slacko was released 2012, they should marry together well.. Feed back soon.
In fact i am getting back to previous Puppies, because kernels are changing, but not my computer.
Dowloading. Sure i will remove LibreOfice as since four years, i have been retired from Business. Goffice will be enough if i had to type some letters to administration or taxes services.
For family, i still use my pencil.
But I Will Add XFCE to get The Puppy fat again.
There are newer Puppy Slacko ? Yes, i know. I bought my Medion feb 2012. Fat Slacko was released 2012, they should marry together well.. Feed back soon.
In fact i am getting back to previous Puppies, because kernels are changing, but not my computer.
- Attachments
-
- Business.jpg
- A DataBase !
- (63.59 KiB) Downloaded 420 times
abiword-2.8.6-gnumeric-1.10.17-goffice-0.8.17-dpup.pet:
abiword-2.8.6-gnumeric-1.10.17-goffice-0.8.17-dpup.pet: 5545 K will be enough for me, it works out of the box, and i shall use the 180MB (compressed) of LIBRE OFFICE to get fun with my Puppy.
I can export to lot of formats, what the huge Libre Office is unable to do !
Gnumeric was a perfect clone of MS-Excel , .. with bugs corrected !
I can export to lot of formats, what the huge Libre Office is unable to do !
Gnumeric was a perfect clone of MS-Excel , .. with bugs corrected !
- Attachments
-
- Grub.jpg
- Fat and Slim Slacko : the opposite
- (37.52 KiB) Downloaded 407 times